Thermador Oven Temperature Inconsistencies

Thermador Oven Temperature Inconsistencies

Name: Appliance Repair Los Angeles
Telephone: 323-792-1970
Price range: $

Thermador Range/Stove/Oven Bake Element

When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Thermador Range/Stove/Oven Control Board

An oven’s control board will often be used to send voltage to the bake and broil elements or the igniters to heat the oven to the designated temperature. When a temperature sensor senses that the oven has reached the appropriate temperature, the control board should shut off the voltage to the heating circuit. If the control board is defective, the voltage may be shut off too early or not at all, resulting in an inaccurate oven temperature. You should test the temperature sensor and other components first before considering replacing the control board. If you confirm the other components are working properly, you can inspect the board for signs of damage or a shorted component. You can also use a multimeter to test for voltage reaching the bake or broil elements or igniters after reviewing the appliance’s wiring diagram.

Oven calibration needed

The first thing to consider is that oven temperature will fluctuate throughout the cooking process. This is normal. To verify oven temperature, it is best to use a digital thermometer with the wire lead end touching a cast iron skillet to keep the temperature reading even. You can use a dial thermometer, but they are slow to react and are not as accurate as a digital one. Heat the oven to 350 degrees Fahrenheit. Let the oven cycle on and off for at least 20 minutes. Check the temperature. If the oven temperature is over or under by 35 degrees Fahrenheit the oven thermostat, oven sensor, or oven control (depending on the model), is likely bad. If the temperature is within 35 degrees above or below the set temperature, it can likely be recalibrated succcessfully. Refer to your owner’s manual.

Thermador Range/Stove/Oven Igniter

The igniter draws electrical current through the gas valve to open it. As the igniter weakens over time, it takes longer to open the gas valve. As a result, the oven temperature will drop too low before the burner reignites. The oven temperature should not drop more than 40 degrees Fahrenheit before the igniter relights the burner.

Thermador Range/Stove/Oven Broil Element

The broil element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.

Thermador Range/Stove/Oven Main Control Board

A range’s main control board will often be used to send voltage to the bake and broil elements or the igniters to heat the oven to the designated temperature. When a temperature sensor senses that the oven has reached the appropriate temperature, the control board should shut off the voltage to the heating circuit. If the control board is defective, the voltage may be shut off too early or not at all, resulting in an inaccurate oven temperature. You should test the temperature sensor and other components first before considering replacing the control board. If you confirm the other components are working properly, you can inspect the board for signs of damage or a shorted component. You can also use a multimeter to test for voltage reaching the bake or broil elements or igniters after reviewing the appliance’s wiring diagram.

Thermador Range/Stove/Oven Temperature Control Thermostat

The temperature control thermostat monitors the temperature inside the oven and cycles on the heat when the oven temperature gets too low. If the temperature control thermostat is not calibrated correctly, it won’t cycle on the heat at the proper time. As a result, the oven temperature might be too high or too low. Due to its complexity, the thermostat is very difficult to test.

Thermador Range/Stove/Oven Temperature Sensor

The oven sensor works in conjunction with the oven control board to regulate the temperature. The sensor regulates the oven temperature by varying its resistance to electrical current as the oven temperature varies. As the oven temperature rises, the oven sensor creates greater resistance. If the sensor gives the wrong amount of resistance, the oven may not bake evenly. On some models, you can recalibrate the oven control up to 35 degrees Fahrenheit higher or lower. Refer to your owner’s manual for instructions on how to recalibrate the oven control.

Thermador Range/Stove/Oven Oven Control Board

The oven control board works in conjunction with the oven sensor to regulate the temperature. The sensor regulates the oven temperature by varying its resistance to electrical current as the oven temperature varies. As the oven temperature rises, the oven sensor creates greater resistance. If the sensor gives the wrong amount of resistance, the oven may not bake evenly. Or if the oven control board does not read the sensor resistance correctly, the oven temperature may be inaccurate. On some models, you can recalibrate the oven control up to 35 degrees Fahrenheit higher or lower. Refer to your owner’s manual for instructions on how to recalibrate the oven control.

Thermador Range/Stove/Oven Convection Element

In a convection oven, the convection element works with the other heating elements to heat the air circulating inside the oven. If the convection element is burned out, the oven won’t heat evenly. To determine if the convection element is burned out, use a multimeter to test the element for continuity. If the convection element does not have continuity, replace it.

Thermador Range/Stove/Oven Convection Motor

In a convection oven, the convection motor drives the convection fan to circulate the air inside the oven. If the convection fan isn’t circulating the air, the oven won’t bake evenly. Try turning the convection fan blade by hand. If the blade is hard to turn, this may indicate that the motor bearings are worn. If the motor bearings are worn, you will have to replace the convection motor. To determine if the motor is defective, use a multimeter to test it for continuity. If the motor does not have continuity, replace it.

Thermador Oven Major Issues

Thermador is a brand synonymous with precision and innovation in the world of kitchen appliances. Renowned for its high-end ovens, Thermador has earned a reputation for pushing the boundaries of culinary technology. With cutting-edge features and sleek designs, Thermador ovens are the go-to choice for home chefs who demand nothing but the best.

However, like any sophisticated appliance, Thermador ovens can encounter issues that disrupt your cooking experience. These major problems can range from temperature inconsistencies, malfunctioning timers and control panels, to heating elements that fail to operate correctly. When these issues arise, it’s crucial to seek professional assistance to ensure your Thermador oven is restored to its optimal performance.

At Appliance Repair Los Angeles, we understand the significance of your Thermador oven in your kitchen. Our team of highly skilled technicians specializes in Thermador appliance repair. We are here to address all your Thermador oven major issues promptly and effectively, ensuring you can get back to cooking with precision and confidence.

Whether you’re facing temperature fluctuations affecting your baking results or if your oven’s control panel is acting up, our experts are well-versed in diagnosing and resolving these problems. We take pride in offering a reliable and efficient solution to keep your Thermador oven in top working condition.

Don’t let Thermador oven issues hinder your culinary aspirations. For expert Thermador oven repair and service in the Los Angeles area, contact Appliance Repair Los Angeles at 323-792-1970. Our skilled technicians are ready to provide timely solutions, ensuring your Thermador oven is back in action, delivering precision and innovation to your kitchen once again.

Thermador Oven Error Code E309, E310 or E312

Thermador Oven Error Code E309, E310 or E312

In the world of high-end kitchen appliances, Thermador ovens are renowned for their precision and performance. However, even the most sophisticated appliances may encounter issues, and one such concern is the appearance of error codes. Among these, Thermador oven error codes E309, E310, and E312 can be particularly perplexing for owners.

Understanding the Error

These specific error codes—E309, E310, and E312—typically point to a malfunction in the electronic oven control board. This vital component is responsible for overseeing various oven functions, including temperature regulation, cooking modes, and timer settings. When the control board encounters an issue, it may trigger these error codes, signaling the need for attention.

Resolving the Error

If you come across Thermador oven error codes E309, E310, or E312, the recommended course of action is to disconnect the electrical power to the oven. This is a safety measure to prevent electrical hazards during the repair process.

The next step is to replace the electronic oven control board. This component is a critical part of your oven’s operation, and its proper functioning is essential for precise cooking and baking. Replacing a malfunctioning control board will restore your oven’s functionality and eliminate the error codes.

Professional Assistance

It’s important to note that dealing with the electronic oven control board and error codes can be complex, and DIY attempts are not advisable. To ensure a safe and effective resolution, it’s best to seek professional assistance from experts familiar with Thermador appliances.

Thermador Oven Error Code E303

Your Thermador oven is a marvel of modern kitchen technology, designed to deliver precision cooking and exceptional results. However, even the most advanced appliances can encounter issues, and Thermador ovens are no exception. One common error code that may appear is E303, signaling that the electronic oven control board has become too hot, exceeding 212 degrees.

If you’ve encountered this error, don’t worry; we’re here to guide you through the steps to diagnose and potentially resolve the issue. Here’s a detailed breakdown of what to do:

1. Check the Oven Door:

Ensure that the upper oven door closes fully. A partially open door can lead to increased temperatures in the control board area.

2. Inspect the Oven Door Hinges:

Examine the upper oven door hinges for defects. If they are faulty or damaged, consider replacing them. Properly functioning hinges are essential for maintaining a tight seal and preventing heat from escaping.

3. Assess the Oven Door Seal:

Inspect the upper oven door seal for any signs of damage or wear. A damaged seal can allow heat to escape, leading to an overheating control board. If you find issues, it’s advisable to replace the seal.

4. Check the Cooling Fan Wire Harness:

Examine the wire harness connections for the upper cooling fan. Loose or damaged wires can disrupt the cooling fan’s operation. Reconnect any loose wires, and if the wire harness is damaged, consider replacing it.

5. Verify Cooling Fan Operation:

Ensure that the upper oven cooling fan is running as expected when activated. A malfunctioning cooling fan can lead to overheating. If the fan is not running correctly, consider replacing it to prevent further issues.

By following these steps and addressing the components mentioned, you can potentially resolve the Thermador oven error code E303. However, it’s important to note that some issues may require professional attention, especially if you are not comfortable with diagnosing or repairing the oven yourself.

For comprehensive assistance with Thermador oven error codes and repairs, including the replacement of parts or expert troubleshooting, don’t hesitate to contact Appliance Repair Los Angeles. Our experienced technicians are well-equipped to diagnose and fix the issue, ensuring your Thermador oven operates at its best.

Thermador Oven Error Code E224 or E226

Thermador ovens are known for their precision and high-performance cooking capabilities. However, even the most advanced appliances can encounter issues, and one such issue is the appearance of error codes like E224 or E226. These codes typically indicate a problem with the lower oven door switch and lower oven door latch switch not being in agreement. In this blog post, we will explore this error code in detail and provide step-by-step guidance on how to diagnose and resolve it effectively.

Error Code Description

The E224 or E226 error code signals a disagreement between the lower oven door switch and the lower oven door latch switch. When these components are not in sync, it can affect the proper functioning of your Thermador oven.

Troubleshooting Steps:

Safety First:

Before proceeding, ensure the electrical power to your oven is disconnected to prevent any accidents or electric shocks.
Inspect Wire Harness Connections:

Begin by carefully inspecting the wire harness connections on both the lower oven door switch and the lower oven door latch. Over time, these connections can become loose or damaged, leading to a malfunction. Reconnect any loose wires securely.
Replace Damaged Wire Harnesses:

If you discover any damaged wire harnesses during your inspection, it’s crucial to replace them with new, intact harnesses. Faulty wiring can often be the root cause of the error code.
Test the Lower Oven Door Switch:

Verify whether the lower oven door switch is controlling the oven light correctly. If it is not functioning as it should, replacing the switch is recommended.
Replace the Lower Oven Door Latch Assembly:

If, after thorough inspection and testing, the lower oven door switch is functioning correctly, but the problem persists, it may be necessary to replace the lower oven door latch assembly.
Consider Replacing the Electronic Oven Control Board:

If none of the above steps resolve the issue, it may indicate a problem with the electronic oven control board. In such cases, replacing the control board is often the final solution.

Thermador Oven Error Code E124 or E126

Thermador ovens are renowned for their precision and performance, but even these exceptional appliances can encounter occasional hiccups, like the E124 or E126 error codes. These specific error codes indicate a disagreement between the upper oven door switch and the upper oven door latch switch. While these codes may seem perplexing, our comprehensive guide will help you understand, troubleshoot, and potentially resolve the issue.

1. Disconnect Electrical Power:

Safety always comes first. Before attempting any checks or repairs, disconnect the electrical power from your oven to ensure your safety.

2. Examine Wire Harness Connections:

The heart of this issue often lies in the wire harness connections. Inspect the connections on both the upper oven door switch and the upper oven door latch. Look for loose wires or damaged wire harnesses.

3. Reconnect or Replace:

If you find any loose wires, securely reconnect them. In the case of damaged wire harnesses, it’s best to replace them to ensure proper functionality.

4. Upper Oven Door Switch Inspection:

Focus on the upper oven door switch. Verify if it correctly controls the oven light. If it doesn’t, it may need replacement.

5. Upper Oven Door Latch Assembly Replacement:

If the upper oven door switch is functioning correctly but the problem persists, it’s time to consider the upper oven door latch assembly’s condition. Replacing it might be necessary.

6. Electronic Oven Control Board Replacement:

If, after addressing the above steps, the error code issue continues to persist, the culprit may be the electronic oven control board. Replacing this component may be the final step to resolve the error.

Thermador ovens are intricate appliances, and when faced with error codes like E124 or E126, it’s essential to follow these systematic steps. If you find yourself uncertain or uncomfortable with any of these procedures, don’t hesitate to seek professional assistance.

Thermador Oven Error Code E218

If your Thermador oven displays Error Code E218, it’s indicating a lower oven cooling fan failure. This error can disrupt your cooking experience and needs prompt attention to get your oven back in working order. Here’s a detailed guide on how to address this issue effectively.

Step 1: Safety First

Ensure the safety of the repair process by disconnecting the electrical power to the oven. This will prevent any accidents while you work on resolving the issue.

Step 2: Inspect Wire Harness Connections

Check the wire harness connections on the lower oven cooling fan and the lower oven cooling fan hall sensor (tachometer). Over time, these connections can become loose, which may lead to the cooling fan malfunction.

Step 3: Reconnect or Replace Wires

If you find any loose wires during the inspection, reconnect them securely. Ensure a snug fit to prevent further connectivity issues. If you notice damaged wire harnesses, replace them as needed.

Step 4: Test the Lower Oven Cooling Fan

Now, it’s time to check the lower oven cooling fan. Activate the fan and observe its performance. If it doesn’t run as expected, it might be the source of the error. In this case, consider replacing the lower oven cooling fan to restore its proper functionality.

Step 5: Lower Oven Cooling Fan Hall Sensor Check I

f the cooling fan runs correctly during the test, the issue may lie with the lower oven cooling fan hall sensor. The hall sensor (tachometer) measures the fan’s speed. If it’s malfunctioning, it could cause the error code. In this scenario, replace the lower oven cooling fan hall sensor to ensure the cooling fan operates as intended.

Thermador Oven Error Code E118

Your Thermador oven is a marvel of engineering, designed to deliver culinary perfection. However, like any sophisticated appliance, it may occasionally display error codes. One such error code is E118, indicating an issue with the upper oven cooling fan.

Troubleshooting E118 Error:

Safety First: Before attempting any troubleshooting, ensure your oven is disconnected from electrical power to avoid any accidents.
Check Wire Harness Connections: Start by inspecting the wire harness connections related to the upper oven cooling fan and the upper oven cooling fan hall sensor, also known as the tachometer. Loose or disconnected wires can be the root cause of the problem.
Reconnect or Replace Wires: If you find any loose wires, reconnect them securely. Additionally, examine the wire harnesses for any visible damage. If you identify damaged wires, they should be replaced.
Testing the Upper Oven Cooling Fan: To ascertain if the upper oven cooling fan is functional, activate it. If the fan fails to run, it’s a clear indication of a malfunction. In such a case, replacing the upper oven cooling fan is necessary.
Testing the Upper Oven Cooling Fan Hall Sensor: If the cooling fan runs correctly during testing, the issue may lie with the hall sensor. Replacing the upper oven cooling fan hall sensor may be required to rectify the problem.

Understanding and addressing Thermador oven error codes like E118 is essential to ensure your oven continues to provide top-notch performance. If you encounter this error code and are uncertain about the steps or lack the tools to resolve it, don’t hesitate to contact our expert technicians at Appliance Repair Los Angeles. We specialize in diagnosing and repairing high-end appliances like Thermador ovens, ensuring they function flawlessly.

Thermador Oven Error Code E116, E122 or E123

If you’re encountering error codes E116, E122, or E123 on your Thermador oven, it’s typically associated with a meat probe error. These error codes indicate that there’s an issue with the meat probe functionality. Here’s a comprehensive guide on how to diagnose and resolve this problem step by step:

1. Disconnect Electrical Power:

Before you begin any troubleshooting, ensure your safety by disconnecting electrical power to the oven. This can be done by turning off the oven or unplugging it from the power source.

2. Check the Meat Probe Receptacle Wire Harness:

Begin by inspecting the wire harness connections of the meat probe receptacle. This is where the meat probe connects to the oven.
Ensure the wire connections are secure and not loose. Reconnect any loose wires.

3. Inspect for Wire Harness Damage:

If you find any damage or wear on the wire harness, it’s essential to replace it. Damaged wires can lead to malfunctioning probe readings.

4. Replace the Meat Probe:

If the wire connections and harness are in good condition, but the error persists, the next step is to replace the meat probe itself.
Thermador ovens are equipped with high-precision meat probes, and a malfunctioning probe can lead to error codes.

5. Replace the Meat Probe Receptacle:

If the problem continues even after replacing the meat probe, the issue might lie in the meat probe receptacle. It’s the socket where the probe connects to the oven.
Replacing the receptacle can resolve connectivity issues and eliminate the error codes.

6. Replace the Electronic Oven Control Board:

If none of the above steps rectify the error codes, it may indicate an issue with the electronic oven control board.
The control board is the “brain” of your Thermador oven, and a malfunction can trigger various error codes.

For precise diagnosis and safe replacement of components like the meat probe, wire harness, meat probe receptacle, or electronic oven control board, it’s advisable to seek the expertise of professionals. Appliance Repair Los Angeles specializes in Thermador oven diagnostics and repairs.

Thermador Oven Error Code E215

If your Thermador oven displays the E215 error code, indicating that the lower oven temperature is too high, it’s essential to address this issue promptly for safe and efficient cooking. This error code may occur due to various reasons, and we’ll guide you through a comprehensive troubleshooting process:

1. Disconnect Electrical Power and Replace the Electronic Oven Control Board:

If the oven overheated because the electronic oven control board has a defective relay, disconnect the electrical power to the oven. Replace the electronic oven control board with a new one to rectify this issue. A malfunctioning control board can lead to temperature irregularities.

2. Check the Wire Harness Connections for the Lower Oven Temperature Sensor:

If the error code appears when the oven isn’t overheating, disconnect the electrical power to the oven. Carefully examine the wire harness connections for the lower oven temperature sensor. Look for loose or damaged wires.

3. Reconnect Loose Wires or Replace the Wire Harness:

If you find any loose wires in the harness, reconnect them securely. Loose connections can lead to inaccurate temperature readings. If the wire harness is damaged, it’s crucial to replace it. A damaged harness can cause communication issues between components.

4. Cяeck the Lower Oven Temperature Sensor Resistance:

Using a multimeter, measure the resistance of the lower oven temperature sensor. The sensor should have a resistance of approximately 1,080 ohms at 70 degrees Fahrenheit.

5. Replace the Lower Oven Temperature Sensor if Resistance is Off:

If the resistance reading significantly deviates from the expected 1,080 ohms at 70 degrees, it indicates a faulty temperature sensor. In this case, replace the lower oven temperature sensor.

6. Replace the Electronic Oven Control Board if Necessary:

If both the sensor resistance and wire harness are in good condition but the error persists, it may be necessary to replace the electronic oven control board. This component plays a crucial role in maintaining the oven’s temperature accuracy.

Resolving the E215 error code on your Thermador oven requires attention to detail and precise diagnostic steps. If you’re unsure about the procedure or encounter difficulties during the process, it’s recommended to seek professional assistance. Our experienced technicians at Appliance Repair Los Angeles are well-equipped to handle Thermador oven error codes and ensure your oven operates efficiently and safely.