Samsung Washer Error Code t1, ee2/t2, tSt

Error code meaning: Appliance in test mode

The Samsung Washer Error Codes t1, ee2/t2, and tSt typically indicate that the washing machine is in test mode. These codes are not error codes in the traditional sense but rather indicate that the appliance is undergoing testing or diagnostics.

To exit test mode and return the washing machine to normal operation, follow these steps:

1. Press the Power Button: Press and hold the power button on the washing machine for several seconds. This should turn off the appliance.
2. Unplug and Plug Back In: If pressing the power button doesn’t work, unplug the washing machine from the power source for a few minutes. Then, plug it back in and turn it on as you normally would.
3. Factory Reset: In some cases, you may need to perform a factory reset to exit test mode. Refer to your washing machine’s user manual for specific instructions on how to do this, as the process may vary depending on the model.

After performing these steps, your washing machine should no longer display the test mode codes, and it should be ready for regular use.