Samsung Washer Error Code 1E

Error code meaning: Water level sensor Issue

The Samsung Washer Error Code 1E typically indicates a problem with the water level sensor. Here are some steps you can take to troubleshoot and potentially resolve this issue:

1. Restart the Washer: Sometimes, a simple restart can clear minor glitches. Turn off the washer, unplug it from the power source, wait for a few minutes, and then plug it back in. Turn on the washer and see if the error persists.
2. Check Water Supply: Ensure that the water supply to the washer is turned on and that there is adequate water pressure (minimum 0.5 bar, maximum 8 bar). Make sure the water hoses are not kinked or blocked.
3. Inspect Inlet Filters: Check the inlet filters inside the end of the water valve for any debris or blockages. Clean or replace them if necessary.
4. Run a New Program: After performing the above checks, start a new wash cycle to see if the error code clears.

If the 1E error code persists after trying these steps, it’s advisable to seek professional assistance. You can contact Appliance Repair Los Angeles at 323-792-1970 for expert diagnosis and repair services to resolve the issue with your Samsung washer.