Call (323) 792-1970
Customer service:    323-792-1970

Samsung Washer Error Code CE

Samsung washer error codes

Samsung Washer Error Code CE

Error code meaning: Water cool down issue

The Samsung Washer Error Code CE indicates a water cool down issue. This error occurs when the washing machine detects that the water temperature is not cooling down as expected during the wash cycle. To troubleshoot and potentially resolve this issue, consider the following steps:

  • Check Water Supply: Ensure that the cold water supply to the washer is connected correctly and turned on. Cold water is typically indicated by a blue tap. Verify that there is adequate water pressure and that the water inlet valve is functioning properly.
  • Temperature Sensor: The error code may be triggered by a faulty temperature sensor. If you suspect this, it’s advisable to contact a qualified technician or Samsung customer support for a thorough inspection and sensor replacement, if necessary.

 

Continue reading

Samsung Washer Error Code bE3

Samsung washer error codes

Samsung Washer Error Code bE3

Error code meaning: Switch error

Samsung washer error code bE3 indicate a switch error, likely related to a switch or relay fault. It’s essential to check the relay for any faults or damage. If issues persist, contacting a qualified technician or Samsung customer support is recommended for diagnosis and repair. Addressing switch errors promptly ensures the washer operates correctly.

Continue reading

Samsung Washer Error Code B2, bE2

Samsung washer error codes

Samsung Washer Error Code B2, bE2

Error code meaning: Control button issue

The Samsung Washer Error Codes B2 and bE2 both indicate a control button issue. These errors suggest a problem with one or more buttons on the washing machine’s control panel. To troubleshoot and potentially address these error codes:

  1. Restart the Washer: Turn off the washer and unplug it from the power source for a few minutes to reset the electronics. Plug it back in and restart the washer to see if the error code clears.
  2. Inspect the Buttons: Carefully examine all the buttons on the control panel. Check if any buttons are stuck or seem to be physically damaged. Gently press each button to ensure they are not sticking.
  3. Clean the Buttons: Disconnect the appliance from the power source and clean the buttons with a lightly dampened cloth. Sometimes, dirt or residue on the buttons can cause them to malfunction.

 

If you are not experienced in dealing with control panel components, it’s best to seek professional assistance to ensure the issue is resolved correctly.

Continue reading

Samsung Washer Error Code bE1

Samsung washer error codes

Samsung Washer Error Code bE1

Error code meaning: Power button issue

The Samsung Washer Error Code bE1 signifies a power button issue. This error is a very easy one to fix simply shut down your washing machine and it should clear, holding down the power button for too long (around 13 seconds) is what will cause this error code to trigger.

Continue reading

Samsung Washer Error Code bE

Samsung washer error codes

Samsung Washer Error Code bE

Error code meaning: Motor issue

The Samsung Washer Error Code bE indicates a motor issue within the washing machine. This error suggests a problem with the motor’s operation or a related component. To address this, you can try restarting the washer after a brief unplugging, checking for overloading, and inspecting for any obstructions in the drum. If the error persists, it’s recommended to seek professional service to diagnose and resolve the motor problem accurately.

Continue reading

Samsung Washer Error Code AE

Samsung washer error codes

Samsung Washer Error Code AE

Error code meaning: Signal communication error between Main PCB and Sub PCB

The Samsung Washer Error Code AE indicates a communication problem between the main control board and the sub control board. To address this issue, try resetting the washer, checking wiring connections for any loose or damaged wires, and inspecting the control boards for visible damage. If the error persists, it’s advisable to contact a qualified technician or Samsung customer support for further diagnosis and repair.

Continue reading

Samsung Washer Error Code 9E1, 9E2

Samsung washer error codes

Samsung Washer Error Code 9E1, 9E2

Error code meaning: Power error

The Samsung Washer Error Codes 9E1 and 9E2 both indicate a power error. These errors typically occur when there’s a problem with the power supply to the washing machine. Here are the steps to troubleshoot and potentially resolve these issues:

9E1 Error Code:

  • Check Power Supply: Ensure that the power supply to the washing machine is stable and not experiencing electrical fluctuations or surges. Use a surge protector if possible to safeguard your washer from voltage irregularities.
  • Restart the Washer: Turn off the washer, unplug it from the power source, wait for a few minutes, and then plug it back in. This simple reset may clear minor electrical glitches.
  • Test with Another Outlet: Try plugging the washing machine into a different electrical outlet to rule out any issues with the outlet itself.

9E2 Error Code:

  • Follow Steps for 9E1: Begin by following the steps mentioned for the 9E1 error code, as both errors are related to power issues.
  • Check the Power Cord: Inspect the power cord for any visible damage or fraying. If you find any issues, it may be necessary to replace the power cord.
  • Test Another Appliance: To ensure that the issue is with the washer and not the power source, plug another appliance into the same outlet and see if it operates correctly.

 

Dealing with power-related error codes can be challenging, and electrical issues require careful attention to ensure safety. If you are not experienced in working with electrical components, it’s best to leave the troubleshooting and repairs to a professional technician.

Continue reading

Samsung Washer Error Code 8E

Samsung washer error codes

Samsung Washer Error Code 8E

Error code meaning: Over current error

The Samsung Washer Error Code 8E typically indicates an overcurrent error. This error occurs when there is an excessive electrical current detected in the washing machine’s components. To troubleshoot and potentially resolve this issue, follow these steps:

  1. Turn Off and Unplug: First, turn off the washer and unplug it from the power source for safety.
  2. Wait and Reset: Allow the washer to sit unplugged for a few minutes to reset its electronics. This can sometimes resolve temporary electrical glitches.
  3. Check for Overloading: Overloading the washer with too many clothes can lead to excessive current draw. Ensure that you are not overloading the machine with a heavy load.
  4. Inspect the Power Supply: Ensure that the power supply to the washing machine is stable and not experiencing electrical fluctuations or surges. It’s a good idea to use a surge protector to protect your washer from voltage irregularities.
  5. Restart the Washer: Plug the washer back in, turn it on, and start a new wash cycle. Check if the error code 8E is still displayed.

 

Addressing electrical issues promptly is crucial for the safe operation of your washing machine. If you are not comfortable working with electrical components, it’s best to leave the troubleshooting and repairs to a professional technician Appliance Repair Los angeles.

Continue reading

Samsung Washer Error Code 6F

Samsung washer error codes

Samsung Washer Error Code 6F

Unknown: this is not an error code. Contact us about this.

The Samsung Washer Error Code 6F is not a standard error code for Samsung washing machines. Samsung washing machines typically use alphanumeric error codes that consist of a letter followed by a number, such as 4E or 5E.

If you are encountering an error code that appears as 6F on your Samsung washer, it could be a unique error code specific to your model or a display issue. In such cases, it is recommended to consult the user manual or contact Samsung’s customer support for assistance in identifying and resolving the issue.

To effectively diagnose and address any error code on your Samsung washer, it’s essential to refer to the manufacturer’s documentation or seek professional assistance when needed.

Continue reading

Samsung Washer Error Code 6E

Samsung washer error codes

Samsung Washer Error Code 6E

Error code meaning: Water heater not functioning

When you encounter the 6E error on your Samsung washing machine’s control panel, it’s important to diagnose the issue and take appropriate steps to resolve it. This error code can be triggered by various factors, including problems with the main unit, the thyristor switch, or malfunctioning buttons on your appliance.

 

Common Causes of the 6E Error:

  1. Main Unit Failure: The 6E error code may indicate a failure within the main unit of your washing machine.
  2. Thyristor Switch Issue: A malfunctioning thyristor switch can also trigger this error code.
  3. Button Malfunction: If one or more buttons on your appliance are not working correctly, it can lead to the 6E error.

 

How to Address the 6E Error:

  1. Give Your Appliance a Rest: Start by unplugging your washing machine and letting it rest for about 10 minutes. This simple step can sometimes reset the error code.
  2. Examine Your Device: If the error persists after reconnecting the machine, carefully examine it to identify the underlying issue.
  3. Malfunctioning Buttons: If the problem lies with malfunctioning buttons, try holding them for an extended duration. If this doesn’t work, you can access the buttons by loosening the front panel without removing it entirely. Attempt to press any button to see if it responds.
  4. Check Wiring Connections: If the error persists, check the wiring connections using a multimeter. Look for oxidation or wire breakage between the motor, control module, and buttons.
  5. Address Wiring Issues: Clean, fix, and reconnect damaged cords and wires. Replace any burnt elements. If the problem is related to the processor, you may need to replace the control module.
  6. Motor Relay Problems: If the unit fails to turn on or displays the error after a few minutes, it might be due to motor relay issues. Replace any burnt-out components within the relay.
  7. Triac and Tachogenerator Issues: If the control triac is short-circuited, consider replacing it, potentially along with the entire connecting circuit. For tachogenerator problems, replacement is often necessary. Hall sensor issues typically result in errors after drum rotation.

 

Addressing the 6E error requires careful diagnosis and, in some cases, replacement of specific components. If you’re unsure about these troubleshooting steps or need professional assistance, don’t hesitate to contact our experts at Appliance Repair Los Angeles for prompt and effective solutions.

Continue reading