Samsung Dryer Error Codes: Clg, Cg, C9, C80, C8, C90, C1, CL1, and Ct

Name: Appliance Repair Los Angeles
Telephone: 323-792-1970
Price range: $

Samsung dryer error codes Clg, Cg, C9, C80, C8, C90, C1, CL1, and Ct are associated with the vent blockage test. Each of these codes signifies a different condition detected during the vent blockage test. Here’s what each code means and how to address them:

Clg or Cg: These codes indicate that the vent is clogged. To resolve this error, clean out the vent thoroughly to ensure proper airflow.
C80 or C8: These codes suggest that the vent is 80% full. To address this issue, clean out the vent to remove lint and debris, allowing for better airflow.
C90 or C9: These codes indicate that the vent is 90% full. Like the previous codes, clean out the vent to eliminate any blockages.
C1 or CL1: This code signifies that there is laundry inside the dryer during the vent blockage test. Remove the laundry from the dryer before rerunning the test.
Ct: This code indicates that the dryer’s temperature is either below freezing or above 104°F. To resolve this error, allow the dryer to reach room temperature if it’s too cold or cool down if it’s too hot. Then, rerun the vent blockage test.

Regularly cleaning the vent system is essential to prevent these vent blockage-related errors and maintain the efficiency and safety of your Samsung dryer. Ensure proper ventilation to avoid overheating and improve drying performance.

Samsung Dryer Error Codes: FC, FE, and 1 FC

Samsung dryer error codes FC, FE, and 1 FC are related to frequency errors, which indicate inconsistencies in the power source. These errors can disrupt the normal operation of your dryer. Here’s how to address these error code

Check the Power Supply: Verify that your dryer is receiving a consistent and stable power supply. Inconsistent power can trigger these frequency-related errors. Ensure that the power source is reliable, and there are no electrical issues in your home’s wiring.
Restart the Drying Cycle: Try restarting the drying cycle. Sometimes, these errors may be temporary glitches that can be resolved by simply restarting the dryer.

If the error codes persist after checking the power supply and attempting to restart the cycle, it’s recommended to contact a qualified technician. Frequency errors may indicate underlying electrical problems that require professional diagnosis and repair.

Dealing with frequency errors promptly will help ensure that your Samsung dryer operates smoothly and efficiently, while also preventing potential electrical issues.

Samsung Dryer Error Codes: AC, Et, AE, EEE, AE4, AE3, AE5, E3, and 1 AC

These error codes indicate a problem with the internal communications between the internal components within your Samsung dryer.

To solve these error codes, you need to:

Turn your dryer off for 60 seconds.
Turn it back on and check if the error code has gone.
If not, you’ll need to get a qualified technician to come and inspect all the internal components to diagnose the cause of the error code and then fix it.

Addressing overheating errors promptly and ensuring proper ventilation and maintenance can help maintain the safety and performance of your Samsung dryer.

Samsung Dryer Error Codes: HC, hE, HC4, and 1 HC

The major causes of an overheating dryer are clogging of the lint screen or vent, overloading, overusing, faulty sensors, or even a problematic heating element.

Out of all the technical faults, there are a few things that are controllable, such as clogs, overuse, and overloading the dryer.

Furthermore, timely maintenance of your dryer will prevent it from clogging.

How to fix the HC error code in a Samsung dryer?

Apart from the hC error code, there are a few other codes in Samsung dryers that point toward overheating problems such as hE, HC4, 1 HC, etc.

Here are some common causes for the hC error, along with some possible solutions.

1. Overusing

The first step is to determine if you have overused your dryer more than usual. If that is the case, then simply turn off the dryer and let it rest for some time, or use it after a gap of an hour or two.

2. Overloading

If you have loaded a lot of garments, which is beyond the dryer’s capacity, then that could be the possible reason for overheating. Simply turn off the dryer, and as it cools down, remove a few garments from the drum. Try running the dryer, and this should fix the error.

3. Drying Large Sheets

In some cases, if you have loaded a large garment or a king-size bedsheet with no room left in the drum. This will prevent the required airflow into the drum and lead to overheating.

4. Lint Screen

If your dryer is overheating, it’s time to check the lint filter to see if it needs to be cleaned. Depending on the dryer type you can locate and remove the lint screen along with its mounting bracket. Clean it thoroughly and reinstall it back to check if the problem still persists. If the filter is clean or if the error still appears after performing all the cleaning tasks, then the next step is to inspect the venting system.

5. Clogged Vent

One of the other common reasons for overheating could be that the air vents are blocked. The vents allow hot air to escape from the dryer, and if they are blocked, the hot air has nowhere to go. Hence it is always advised to clean the air vents regularly. Moreover, you should inspect them once a month to ensure they are clear and unobstructed. If the venting system is clear and the dryer still shoots the same error code, then the next step is to proceed toward the technical parts.

6. Power Surges

If you have noticed a power fluctuation issue in your household recently and if the dryer was running at the same time, it could be the possible cause of why the dryer is overheating. Simply halt the dryer mid-cycle and unplug it from power. Then, run the dryer only after the power supply stabilizes. Running a dryer or any other appliance during power surges can lead to damage to the unit, especially the electrical components.

7. Check the Wires

Start by unplugging the wire from the power socket and seeing if it shows any signs of wear and tear. If the power cables are worn out, replace them, and if they’re in a good condition, try switching the socket.

8. Faulty Thermostat

A faulty thermostat is one of the most common reasons for an error code like hC. A thermostat is responsible for maintaining the temperature in the dryer. It senses when the dryer has reached the set temperature and then turns off the heating element. If the thermostat is not functioning properly, it will not be able to sense the temperature correctly, which will result in the dryer overheating. You can check the thermostat with a multimeter to see if it is working correctly or not.

If the error codes persist after checking ventilation, cleaning the lint screen, and performing a reset, or if you are unsure about any of the steps, it’s recommended to contact a qualified technician. They can inspect your Samsung dryer for any internal issues that may be causing overheating and provide the necessary repairs.

By addressing overheating issues promptly and maintaining proper ventilation, you can ensure the safe and efficient operation of your Samsung dryer.

Samsung Dryer Error Codes: tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, and 1tCS

Samsung dryer error codes tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, and 1tCS are related to temperature issues within the dryer or problems with the sensors that monitor the temperature. These error codes often indicate issues such as overheating or temperature irregularities. Here’s how to troubleshoot and potentially resolve these error codes:

Clean the Lint Screen/Filter: Begin by locating the lint screen or filter inside your dryer. Remove it and give it a thorough cleaning. A clogged lint screen can cause temperature-related issues.
Vent System Inspection: Disconnect the vent from your dryer and vacuum it out to remove any lint or blockages. A blocked vent system can lead to overheating and temperature-related errors.
Check for Blockages: Examine the entire venting system, including the hose, for any blockages or restrictions. Clear any obstructions to ensure proper airflow.
Reset the Dryer: After cleaning the lint screen and vent system, reset the dryer by turning it off and unplugging it from the power source for a few minutes. Plug it back in and turn it on to see if the error codes have cleared.

If the error codes persist after performing the above checks, or if you’re unsure about any of the steps, it’s recommended to contact a qualified technician. They can inspect your Samsung dryer, diagnose the specific temperature-related issue, and perform any necessary repairs.

Taking these steps to address temperature-related error codes ensures that your Samsung dryer operates safely and efficiently. Proper maintenance and ventilation are crucial for preventing overheating and other temperature-related issues.

Samsung Dryer Error Codes: dC, dE, dF, do, d0, 1 DC, and 1 dF

These error codes indicate a problem with the door, most commonly the door latch or the sensors. When these codes appear, it generally means you need to check your door to see if it closes properly.

Check the Door: Ensure that the dryer door is securely closed. Sometimes, these error codes can occur if the door is not properly latched.
Inspect the Door Latch: Examine the door latch to see if it fits into its slot correctly and if it’s in good condition. If the latch is damaged or not functioning correctly, it may need to be repaired or replaced.
Sensor Examination: Some of these error codes may also relate to problems with the door sensor. Ensure that the sensor is clean and not obstructed. Clean the sensor if necessary.

If the error codes persist after checking the door, latch, and sensor, or if you are unsure about performing any of these checks, it’s advisable to contact a qualified technician. They can thoroughly inspect your Samsung dryer, diagnose the specific issue, and provide the necessary repairs or replacements.

Samsung Dryer Error Codes: bE, bE2, bC2, 6E, 6E2, and 6C2

These error codes indicate that one or more of the buttons on the panel are jammed or are being pushed in continuously. When this happens, you’ll get one of the above error codes, and your dryer won’t operate.

Here’s what to do if you get one of these error codes:

Turn the dryer off.
Check each of the buttons to see if any of them are damaged. If damaged, the buttons or the whole panel will need to be replaced.
If the buttons are not damaged, turn your dryer back on, and see if the error code has disappeared. If not, you’ll need to get a qualified technician to come and inspect your dryer.

Addressing button-related issues promptly is essential to ensure that your Samsung dryer’s control panel functions correctly. This proactive approach will help you operate your dryer smoothly, free from any interruptions caused by jammed or malfunctioning buttons.

Samsung Dryer Error Codes: 9C1, 9E, 2E, and 9E1

Samsung dryer error codes 9C1, 9E, 2E, and 9E1 are all related to voltage issues. These error codes indicate that something is wrong with the voltage levels in your Samsung dryer. To address these issues, you can follow these steps:

Check the Power Source: Ensure that your Samsung dryer is connected to a dedicated circuit. Dryers use a significant amount of energy, and sharing a circuit with other appliances can lead to voltage fluctuations.
Avoid Extension Cords: Do not plug your dryer into an extension cord. Extension cords may not provide a stable power supply, which can lead to voltage errors.
Inspect the Power Cord: If you have an electric dryer, make sure the power cord is correctly installed and securely connected. Verify that the voltage level is within the recommended range.
Reset the Dryer: If you encounter any of these error codes, try resetting your dryer. You can do this by unplugging it from the power source for a few minutes and then plugging it back in.

By addressing voltage issues promptly, you can ensure that your Samsung dryer operates smoothly and efficiently.

Samsung Dryer Error Codes

In this post, we will focus on the iconic brand, Samsung Dryer, and explore common issues you may encounter. As a trusted service provider, Appliance Repair Los Angeles is here to help you keep your Samsung Dryer running smoothly. Along the way, we’ll refer to a handy table summarizing error codes and their causes.

A Guide by Appliance Repair Los Angeles

Error codes	Cause
9C1, 9E, 2E, and 9E1	Voltage issues
bE, bE2, bC2, 6E, 6E2, and 6C2	Button jamming
dC, dE, dF, do, d0, 1 DC, and 1 dF	Door problems
tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, and 1tCS	Temperature issues
HC, hE, HC4, and 1 HC	Overheating
AC, Et, AE, EEE, AE4, AE3, AE5, E3, and 1 AC	Internal communication problems
FC, FE, and 1 FC	Frequency errors
Clg, Cg, C9, C80, C8, C90, C1, CL1, and Ct	Vent blockage test errors.
3C	Dryer motor issue
oD	Dry time problem
1 AC7	Electronic control malfunction
HC2	Gas ignition issue

Maintaining your Samsung Dryer is essential for ensuring its longevity and optimal performance. When confronted with error codes or operational problems, rest assured that our dedicated team at Appliance Repair Los Angeles is readily available to assist you. Feel free to consult the table provided earlier in this post to pinpoint the specific error code and its potential underlying causes. For expert troubleshooting and Samsung dryer repair services, please do not hesitate to reach out to us at our contact number: 323-792-1970. Trust us to keep your Samsung Dryer running smoothly with Appliance Repair Los Angeles!