Samsung Dishwasher: Error Code HE, tE
The Samsung dishwasher error code HE or tE typically indicates a heater error. This error suggests that there may be an issue with the dishwasher’s heating element or related components. To address this error, it’s advisable to empty the dishwasher, fill it with the usual amount of detergent, and then run a normal cycle. This action may help reset the heating element and clear the error. If the error persists or reoccurs frequently, it’s recommended to contact a technicians for a more thorough diagnosis and potential repair. Issues with the heating element can affect the dishwasher’s ability to wash dishes effectively, so prompt attention is important.
Samsung Dishwasher: Error Code HC, IE, 1E
The Samsung dishwasher error codes HC, IE, and 1E are associated with high-temperature heater-related issues. When your dishwasher displays any of these codes, it indicates that the water inside the dishwasher is reaching a boiling temperature.
First, disconnect the power cord of your dishwasher for approximately 30 seconds to reset it. Then, carefully open the dishwasher and empty it of any dishes or items inside. Afterward, fill the detergent dispenser with the appropriate amount of dishwasher detergent.
To mitigate the risk of the water overheating, make sure to run a new cycle with an empty dishwasher, allowing it to fill with cold water. By following these steps, you can help resolve the high-temperature heater-related error codes and ensure the safe and efficient operation of your Samsung dishwasher.
Samsung Dishwasher: Error Code CE
This code indicates a communication error. The error occurs when the control panel is not communicating properly with the dishwasher. To troubleshoot this error, you will need to reboot the control panel. Do this by turning off the dishwasher and restarting the machine. If the problem continues and the error shows up again, contact a technician.
Samsung Dishwasher: Error Code bE, 6E
The error codes bE and 6E on your Samsung dishwasher typically indicate a button error. These codes suggest that a button on the control panel may be stuck, possibly due to extended pressing or another issue. To address this issue, you can try the following steps:
Begin by disconnecting the power cord from the dishwasher to ensure safety during troubleshooting. After that, systematically press each of the buttons on the control panel to check if any button is stuck or unresponsive. If you find a button that is sticking or not responding as it should, gently unstick it and ensure that it functions correctly. Once you have checked all the buttons and resolved any issues, reconnect the power cord and test the dishwasher to see if the error codes bE and 6E have cleared. If the error codes persist or if you are unsure about any button-related problems, it’s advisable to contact technicians for further assistance. They can provide professional guidance and repairs if needed to ensure your dishwasher operates smoothly.
Samsung Dishwasher: Error Code AP
The error code AP on your Samsung dishwasher signifies “Access Point Mode.” This mode is designed to enable your dishwasher to connect with your mobile phone for certain functionalities. If you encounter this error, you can typically resolve it by turning off the dishwasher and then restarting it. This action should exit the Access Point Mode, allowing your dishwasher to operate normally. However, if you continue to experience difficulties or have any questions about this mode, it’s advisable to refer to your dishwasher’s user manual or reach out to Samsung customer support for further assistance.
Samsung Dishwasher: Error Code 9E
This code indicates a low water level error. This error occurs when there is not enough water in the dishwasher. The best way to troubleshoot this error is to ensure your dishwasher is level and all wires are undamaged and securely connected. You may need to replace the water level sensor or wire harness if they are damaged.
Samsung Dishwasher: Error Code 7E
The Samsung dishwasher error code 7E is an indication of a water reflector error. When you encounter this error code, it suggests that the reflector inside the dishwasher is not moving correctly from its designated position. To resolve this issue, you should ensure that the reflector is positioned correctly. If you’re unsure about how to do this, it’s advisable to seek technician assistance. Properly addressing the water reflector error will help ensure that your Samsung dishwasher functions optimally and continues to provide efficient cleaning results.
Samsung Dishwasher: Error Code 5C, 5E
The Samsung dishwasher error codes 5C and 5E are indicative of a drain error. When you encounter these error codes, it means that your dishwasher is having difficulties draining water properly. To address this issue, you should start by checking the drain connection and the drain hose to ensure they are effectively connected to the dishwasher. Additionally, make sure to clean the drain or filter and inspect the sump for any debris or obstructions that might impede proper drainage. Properly addressing these drainage-related issues will help ensure your Samsung dishwasher operates smoothly and effectively. If the problem persists, don’t hesitate to seek assistance from a professional technician to diagnose and resolve the underlying cause of the error.
Samsung Dishwasher: Error Code 4C, 4E
This code indicates a water supply error. This code will be displayed if there is no water in the dishwasher tub six minutes after the cycle starts. This code often indicates a problem with the water inlet valve. In order to troubleshoot this, you need to check that the water supply cut-off valve is open fully. Next, check the inlet valve screen is not clogged or damaged. Also, check all wiring, ensuring it is not damaged and that the valve is connected properly. You may need to replace the water inlet valve if the issue continues.
Samsung Dishwasher: Error Code 3E
The error code 3E on your Samsung dishwasher indicates a high-temperature water supply error. This error suggests that the dishwasher is detecting excessively high water temperature during a wash cycle. To address this issue, follow these steps:
- Lower the Temperature: Manually lower the water temperature by adjusting the hot water supply to the dishwasher. Make sure the water temperature is set to below 80 degrees Celsius (176 degrees Fahrenheit).
- Reset the Dishwasher: After adjusting the water temperature, reset the dishwasher by turning it off and then back on. This can sometimes clear the error code if it was triggered by a temporary issue.
- Check Water Supply: Ensure that the hot water supply to the dishwasher is not too hot. Extremely hot water can trigger the error. Adjust your water heater if necessary.
- Contact Support: If the error code persists even after adjusting the water temperature and resetting the dishwasher, it’s advisable to contact Samsung Support or a technician. There may be a more complex issue with the dishwasher’s temperature sensor or heating element that requires professional attention.
By following these steps, you can often resolve the high-temperature water supply error (3E) on your Samsung dishwasher and ensure its proper operation.
