Monogram Dishwasher Error Code F113

Monogram Dishwasher Error Code F113

Name: Appliance Repair Los Angeles
Telephone: 323-792-1970
Price range: $

This error code indicates that the dishwasher’s leak detection system has been activated. This system is designed to detect leaks and prevent water damage.

Faulty leak sensor: The leak sensor is a component that detects water leaks. If the sensor is faulty, it may not be able to detect a leak, resulting in the error code.
Loose connection: The leak sensor is connected to the control board by a wiring harness. If the wiring harness is loose or damaged, it may not be able to properly communicate with the control board, resulting in the error code.
Internal leak: A leak can occur anywhere in the dishwasher, including the tub, pump, or hoses. If a leak occurs, it will be detected by the leak sensor, resulting in the error code.

Troubleshooting Steps:

Tighten connections: The first step is to check the wiring harness connections between the leak sensor and the control board. Make sure that all connections are tight and secure.
Check for visible leaks: Next, check the dishwasher for any visible leaks. Look for water under the dishwasher, around the door seals, or in the tub. If you see any leaks, stop using the dishwasher immediately and contact a qualified appliance repair technician.
Advanced diagnostics: If you cannot find any visible leaks, you may need to contact a qualified appliance repair technician for advanced diagnostics. The technician will be able to use specialized tools and equipment to identify the source of the leak.

Additional Tips:

If you see the F113 error code, it is important to stop using the dishwasher immediately. Continuing to use the dishwasher could damage the dishwasher or cause water damage to your home.
If you are unable to resolve the issue yourself, contact a qualified appliance repair technician. A qualified technician will be able to diagnose and repair the leak quickly and efficiently.

Here are some additional details that you could include in your explanation:

The leak sensor is typically located near the bottom of the dishwasher, on the side of the tub.
The wiring harness for the leak sensor is typically a black or white cable with a yellow connector.
If you see a leak, it is important to clean up the water immediately to prevent water damage.
A qualified appliance repair technician will be able to use a leak detector to find the source of the leak.

I hope this helps! Let me know if you have any other questions.

Monogram Dishwasher Error Code A5

The A5 error code indicates a malfunction with the wash pump in your Monogram dishwasher. The wash pump is responsible for circulating water throughout the dishwasher during the wash cycle. If the pump is not working properly, the dishwasher will not be able to clean your dishes effectively.

There are several possible causes of the A5 error code, including:

Debris obstructing the pump: This is the most common cause of the A5 error code. Food particles, debris, or other objects can become lodged in the pump, preventing it from rotating.
Damaged impeller: The impeller is the rotating part of the pump that helps to circulate water. If the impeller is damaged, it will not be able to rotate properly.
Faulty pump motor: The pump motor is responsible for powering the pump. If the motor is faulty, it will not be able to rotate the impeller.

If you see the A5 error code on your Monogram dishwasher, you can try the following troubleshooting steps:

Check for debris obstructing the pump: Unplug the dishwasher and remove the bottom panel. Inspect the pump for any debris. If you find any debris, remove it with a soft brush or vacuum.
Inspect the impeller: If you do not find any debris obstructing the pump, inspect the impeller for damage. If the impeller is damaged, it will need to be replaced.
Check the pump motor: If the impeller is not damaged, check the pump motor for any signs of damage or corrosion. If the pump motor is faulty, it will need to be replaced.

Additional Tips:

If you are unable to resolve the issue after following these steps, you should contact a qualified appliance repair technician.
To prevent the A5 error code from occurring, it is important to regularly clean the dishwasher. This will help to prevent debris from accumulating in the pump.

Here is a more detailed explanation of each troubleshooting step:

Step 1: Check for debris obstructing the pump:

The pump is located in the bottom of the dishwasher. To access the pump, you will need to remove the bottom panel. Once the panel is removed, you can inspect the pump for any debris. Debris can include food particles, debris, or other objects. You can remove debris with a soft brush or vacuum.

Step 2: Inspect the impeller:

The impeller is the rotating part of the pump that helps to circulate water. To inspect the impeller, you will need to remove the pump. Once the pump is removed, you can inspect the impeller for any damage. Damage can include cracks, chips, or other defects. If the impeller is damaged, it will need to be replaced.

Step 3: Check the pump motor:

The pump motor is responsible for powering the pump. To check the pump motor, you will need to use a multimeter to measure the resistance of the motor. The resistance should be within the specified range for your dishwasher model. If the resistance is outside of the specified range, the pump motor will need to be replaced.

I hope this information is helpful. Let me know if you have any other questions.

Monogram Dishwasher Error Code HL

The HL error code on a Monogram dishwasher indicates a problem with the door lock mechanism. This mechanism is responsible for keeping the door closed during the wash cycle to prevent water from leaking. If the door lock is not working properly, the dishwasher will not be able to operate.

There are several possible causes for the HL error code, including:

Faulty door latch. The door latch is a small, spring-loaded device that holds the door closed. If the latch is damaged or worn out, it may not be able to properly engage the door.
Faulty lock assembly. The lock assembly is a more complex mechanism that includes the door latch, a solenoid, and a wiring harness. If any of these components are defective, it can cause the HL error code.
Faulty wiring. The door lock mechanism is controlled by a wiring harness that connects it to the control board. If the wiring is damaged or disconnected, it can prevent the door lock from operating properly.

Troubleshooting Steps

If you see the HL error code on your Monogram dishwasher, you can try the following troubleshooting steps:

Check the door latch. Visually inspect the latch for any damage or wear. You can also try to manually engage the latch to see if it works properly.
Check the lock assembly. If the door latch is in good condition, you can then check the lock assembly. To do this, you will need to remove the dishwasher door. Once the door is removed, you can inspect the lock assembly for any damage or loose components.
Check the wiring. If the lock assembly is in good condition, you can then check the wiring. To do this, you will need to use a multimeter to check for continuity between the wires that connect to the door lock.

If you have checked all of the above and the error code persists, you will need to contact a qualified appliance repair technician.

Monogram Dishwasher Error Code CE

The CE error code on a Monogram dishwasher indicates a communication breakdown between components.

This can be caused by a variety of factors, including:

Faulty wiring: The wires connecting the different components of the dishwasher may be damaged or corroded.
Loose or disconnected wiring: The wires may be loose or disconnected at the connectors.
Defective component: One of the components involved in the communication may be defective.

To troubleshoot the CE error code, you can try the following steps:

Power cycle the dishwasher: Unplug the dishwasher for 30 seconds, then plug it back in. This can sometimes reset the control board and clear the error code.
Check the wiring connections: Inspect all of the wiring connections between the different components of the dishwasher. Make sure that the wires are securely connected at all of the connectors.
Inspect the components: Inspect the components involved in the communication for any signs of damage or wear. If you find any damage, replace the component.

If you have checked all of the wiring connections and components and the error code persists, you may need to contact a qualified appliance repair technician.

Here are some additional details that you may want to include in your explanation:

The communication between components in a dishwasher is essential for the proper operation of the appliance. The control board sends signals to the different components, telling them what to do. If there is a communication breakdown, the dishwasher may not be able to complete a cycle or may operate incorrectly.
The wiring connections between the components are critical. The wires must be securely connected at all of the connectors to ensure that the signals are transmitted properly.
The components involved in the communication can be damaged or defective. If a component is damaged, it may not be able to send or receive signals properly.

Monogram Dishwasher Error Code LC

The LC error code on a Monogram dishwasher indicates that the leak sensor has detected a water leak. This can be caused by a variety of problems, including:

A leak in the dishwasher’s base. This is the most common cause of the LC error code. To check for a leak, turn off the dishwasher and unplug it from the wall. Then, visually inspect the dishwasher’s base for any signs of water. If you see any water, you will need to identify the source of the leak and repair it.
A leak in a hose. The dishwasher has two hoses: one for water supply and one for drain. If either of these hoses is leaking, it can cause the LC error code. To check for a leak in a hose, disconnect the hose from the dishwasher and inspect it for any cracks or damage. If you find any damage, you will need to replace the hose.
A problem with the door gasket. The door gasket is a rubber seal that helps to keep water from leaking out of the dishwasher. If the door gasket is damaged or worn, it can cause the LC error code. To check the door gasket, close the dishwasher door and apply pressure to the gasket. If you feel any air escaping, you will need to replace the gasket.

If you see the LC error code on your Monogram dishwasher, you can try the following troubleshooting steps:

Turn off the dishwasher and unplug it from the wall.
Visually inspect the dishwasher’s base for any signs of water.
Disconnect the water supply and drain hoses from the dishwasher.
Inspect the hoses for any cracks or damage.
Close the dishwasher door and apply pressure to the door gasket.
If you find any leaks or damage, repair or replace the affected component.

If you have checked all of the possible causes and you are still seeing the LC error code, you may need to contact a qualified appliance repair technician.

Additional Tips

To help prevent leaks, it is important to clean the dishwasher regularly. This will help to remove any food particles or debris that could clog the drain or cause other problems.
You should also inspect the hoses and door gasket regularly for signs of wear or damage. If you find any problems, repair or replace the affected component as soon as possible.

By following these tips, you can help to keep your Monogram dishwasher in good working order and prevent the LC error code from occurring.

Monogram Dishwasher Error Code UO

The vent on the dishwasher is not closing properly. This can prevent the dishwasher from draining properly or can cause water to back up into the dishwasher.

Possible Causes:

Obstruction: The vent may be blocked by food particles, debris, or other objects.
Malfunction: The vent may be damaged or malfunctioning.
Control Board Issue: The control board may not be sending the correct signal to the vent.

Troubleshooting Steps:

Check for obstructions: Remove the filter and check the vent for any food particles, debris, or other objects. If you find any obstructions, remove them carefully.
Check vent operation: Turn on the dishwasher and listen for the vent to close. If you do not hear the vent close, the vent may be damaged or malfunctioning.
Inspect vent assembly: If you suspect that the vent is damaged or malfunctioning, you can inspect the vent assembly for any signs of damage. If you find any damage, you may need to replace the vent assembly.

Additional Tips:

If you are unable to resolve the issue, you may need to contact a qualified appliance repair technician.

Here are some additional details that you could include in your explanation:

The vent is responsible for venting hot air and steam out of the dishwasher.
If the vent is not closing properly, it can cause the dishwasher to overheat and can also create a safety hazard.
When checking the vent for obstructions, be sure to use a flashlight to see into the vent.
If you suspect that the vent is damaged, you can try to clean it with a soft brush or vacuum cleaner. However, if you are unable to clean the vent, you may need to replace it.

Monogram Dishwasher Error Code ER

The ER error code on a Monogram dishwasher indicates a malfunction in the water heater. This can be caused by a number of factors, including:

Faulty heating element: The heating element is responsible for heating the water in the dishwasher. If the element is faulty, it may not be able to heat the water to the desired temperature, or it may overheat and cause damage to the dishwasher.
Faulty thermostat: The thermostat is responsible for regulating the temperature of the water in the dishwasher. If the thermostat is faulty, it may not be able to accurately measure the water temperature, or it may allow the water to overheat.
Wiring issue: A wiring issue can also cause the ER error code. If the wires connecting the heating element or thermostat to the control board are damaged or corroded, it can prevent the components from communicating with the control board, which can lead to malfunctions.

If you see the ER error code on your Monogram dishwasher, you can try the following troubleshooting steps:

Check the water supply: Make sure that the water supply to the dishwasher is turned on and that the water pressure is sufficient.
Inspect the heating element: Disconnect the power to the dishwasher and then inspect the heating element for any signs of damage, such as cracks, burns, or corrosion. If you see any damage, the heating element will need to be replaced.
Inspect the thermostat: Disconnect the power to the dishwasher and then inspect the thermostat for any signs of damage, such as cracks, burns, or corrosion. If you see any damage, the thermostat will need to be replaced.
Check the wiring: Disconnect the power to the dishwasher and then inspect the wiring connecting the heating element and thermostat to the control board for any signs of damage, such as loose connections, frayed wires, or corrosion. If you see any damage, the wiring will need to be repaired or replaced.

If you have tried these troubleshooting steps and the error code persists, you will need to contact a qualified appliance repair technician.

Additional Information

In some cases, the ER error code may be caused by a software issue. If you have tried the troubleshooting steps above and the error code persists, you can try resetting the dishwasher’s control board. To do this, unplug the dishwasher from the power outlet for 30 seconds and then plug it back in.
You can also refer to your dishwasher’s user manual for more detailed troubleshooting instructions.

The ER error code on a Monogram dishwasher can be caused by a number of factors. By following the troubleshooting steps above, you can often identify and resolve the issue yourself. However, if you are unable to resolve the issue, you will need to contact a qualified appliance repair technician.

Monogram Dishwasher Error Code FL

Possible Causes:

Insufficient water supply: This is the most common cause of the FL error code. Make sure that the dishwasher is connected to a water supply with adequate pressure and flow. You can also try turning on a faucet in another part of the house to check for low water pressure.
Clogged inlet valve: The inlet valve is responsible for supplying water to the dishwasher. If the valve is clogged, it can prevent water from flowing into the appliance. You can check for clogs by disconnecting the inlet valve from the dishwasher and inspecting the screen.
Faulty float switch: The float switch is a sensor that detects the water level in the dishwasher. If the float switch is faulty, it can send an incorrect signal to the control board, causing the FL error code. You can check the float switch by disconnecting it from the control board and measuring its resistance with a multimeter. The resistance should be within the specified range for your dishwasher model.

Troubleshooting Steps:

Check the water supply: Make sure that the dishwasher is connected to a water supply with adequate pressure and flow. You can also try turning on a faucet in another part of the house to check for low water pressure.
Check for clogs in the inlet valve: Disconnect the inlet valve from the dishwasher and inspect the screen. If you see any clogs, remove them with a toothpick or other small, pointed object.
Check the float switch: Disconnect the float switch from the control board and measure its resistance with a multimeter. The resistance should be within the specified range for your dishwasher model. If the resistance is outside of the specified range, replace the float switch.

Additional Tips:

If you have checked all of the possible causes and the FL error code is still occurring, you may need to contact a qualified appliance repair technician.
You can also consult your dishwasher’s user manual for additional troubleshooting instructions.

Here are some additional details that you could include in your explanation:

The FL error code is usually accompanied by a message on the dishwasher’s display that says “Insufficient Water Level.”
The FL error code can prevent the dishwasher from completing the wash cycle, so it is important to address the issue as soon as possible.
If you are unable to resolve the FL error code on your own, you should contact a qualified appliance repair technician.

Monogram Dishwasher Error Code PF

The PF error code indicates a power failure during the dishwasher cycle. This can be caused by a variety of factors, including:

A power outage
A loose or damaged power cord
A faulty circuit breaker or fuse
A problem with the dishwasher’s electrical components

To troubleshoot the PF error code, follow these steps:

Check the power source. Make sure that the dishwasher is plugged into a working outlet and that the outlet is turned on.
Check the power cord. Inspect the power cord for any damage, such as cuts, fraying, or kinks. If the power cord is damaged, it should be replaced.
Check the circuit breaker or fuse. Reset the circuit breaker or fuse that controls the dishwasher. If the circuit breaker or fuse trips again, there may be a problem with the dishwasher’s electrical components.
Inspect the dishwasher’s electrical components. If you are comfortable working with electrical components, you can inspect the dishwasher’s electrical components for any damage. If you are not comfortable working with electrical components, you should contact a qualified appliance repair technician.

If you have followed these steps and the PF error code persists, there may be a problem with the dishwasher’s electrical components. In this case, you should contact a qualified appliance repair technician.

Here are some additional tips for troubleshooting the PF error code:

If the PF error code appears immediately after you plug in the dishwasher, there may be a problem with the power cord or outlet. Try plugging the dishwasher into a different outlet.
If the PF error code appears during a cycle, there may be a problem with the dishwasher’s electrical components. Try restarting the dishwasher. If the error code persists, you should contact a qualified appliance repair technician.

By following these troubleshooting steps, you can often resolve the PF error code on your own.

Monogram Dishwasher Error Codes

Monogram, a distinguished brand in the world of home appliances, is synonymous with luxury and innovation. Monogram dishwashers are crafted with precision, offering cutting-edge features and sophisticated design. However, like any complex appliance, they may encounter occasional hiccups, leading to error codes.

In this blog, we delve into the realm of Monogram dishwasher error codes, exploring the common issues that users might face. Our expert insights aim to demystify these codes and empower you with the knowledge needed to understand and troubleshoot problems effectively.

Error Code	Description
PF	Power Failure Learn More
FL	Water Level Fault Learn More
ER	Water Heater Error Learn More
UO	Vent Open Error Learn More
LC	Leak Sensor Error Learn More
CE	Communication Error Learn More
HL	Door Lock Error Learn More
A5	Wash Pump Error Learn More

Monogram Dishwasher ZDB7920P10SS:

Error Code	Description
F113	Leaking detection system activated Learn More
F144	Inverter control board failure Learn More
F35	Diverter feedback error Learn More

Monogram Dishwasher ZM48R45RSS:

Error Code	Description
E1	Drain pump failure Learn More
E2	Water inlet valve failure Learn More
E3	Overflow sensor activated Learn More

Don’t let Monogram Dishwasher Error Codes disrupt your kitchen routine. Trust Appliance Repair Los Angeles to deliver reliable solutions. Call us at 323-792-1970, and let our experts handle your Monogram dishwasher with the care it deserves.

Stay tuned to our blog for valuable insights into Monogram appliances, troubleshooting tips, and more. We’re your dedicated partners in maintaining the peak performance of your high-end appliances.