Monogram Dishwasher Error Code F113

This error code indicates that the dishwasher’s leak detection system has been activated. This system is designed to detect leaks and prevent water damage.

• Faulty leak sensor: The leak sensor is a component that detects water leaks. If the sensor is faulty, it may not be able to detect a leak, resulting in the error code.
• Loose connection: The leak sensor is connected to the control board by a wiring harness. If the wiring harness is loose or damaged, it may not be able to properly communicate with the control board, resulting in the error code.
• Internal leak: A leak can occur anywhere in the dishwasher, including the tub, pump, or hoses. If a leak occurs, it will be detected by the leak sensor, resulting in the error code.

Troubleshooting Steps:

• Tighten connections: The first step is to check the wiring harness connections between the leak sensor and the control board. Make sure that all connections are tight and secure.
• Check for visible leaks: Next, check the dishwasher for any visible leaks. Look for water under the dishwasher, around the door seals, or in the tub. If you see any leaks, stop using the dishwasher immediately and contact a qualified appliance repair technician.
• Advanced diagnostics: If you cannot find any visible leaks, you may need to contact a qualified appliance repair technician for advanced diagnostics. The technician will be able to use specialized tools and equipment to identify the source of the leak.

Additional Tips:

• If you see the F113 error code, it is important to stop using the dishwasher immediately. Continuing to use the dishwasher could damage the dishwasher or cause water damage to your home.
• If you are unable to resolve the issue yourself, contact a qualified appliance repair technician. A qualified technician will be able to diagnose and repair the leak quickly and efficiently.

Here are some additional details that you could include in your explanation:

• The leak sensor is typically located near the bottom of the dishwasher, on the side of the tub.
• The wiring harness for the leak sensor is typically a black or white cable with a yellow connector.
• If you see a leak, it is important to clean up the water immediately to prevent water damage.
• A qualified appliance repair technician will be able to use a leak detector to find the source of the leak.

I hope this helps! Let me know if you have any other questions.