Monogram Dishwasher Error Code ER

The ER error code on a Monogram dishwasher indicates a malfunction in the water heater. This can be caused by a number of factors, including:

• Faulty heating element: The heating element is responsible for heating the water in the dishwasher. If the element is faulty, it may not be able to heat the water to the desired temperature, or it may overheat and cause damage to the dishwasher.
• Faulty thermostat: The thermostat is responsible for regulating the temperature of the water in the dishwasher. If the thermostat is faulty, it may not be able to accurately measure the water temperature, or it may allow the water to overheat.
• Wiring issue: A wiring issue can also cause the ER error code. If the wires connecting the heating element or thermostat to the control board are damaged or corroded, it can prevent the components from communicating with the control board, which can lead to malfunctions.

If you see the ER error code on your Monogram dishwasher, you can try the following troubleshooting steps:

1. Check the water supply: Make sure that the water supply to the dishwasher is turned on and that the water pressure is sufficient.
2. Inspect the heating element: Disconnect the power to the dishwasher and then inspect the heating element for any signs of damage, such as cracks, burns, or corrosion. If you see any damage, the heating element will need to be replaced.
3. Inspect the thermostat: Disconnect the power to the dishwasher and then inspect the thermostat for any signs of damage, such as cracks, burns, or corrosion. If you see any damage, the thermostat will need to be replaced.
4. Check the wiring: Disconnect the power to the dishwasher and then inspect the wiring connecting the heating element and thermostat to the control board for any signs of damage, such as loose connections, frayed wires, or corrosion. If you see any damage, the wiring will need to be repaired or replaced.

If you have tried these troubleshooting steps and the error code persists, you will need to contact a qualified appliance repair technician.

Additional Information

• In some cases, the ER error code may be caused by a software issue. If you have tried the troubleshooting steps above and the error code persists, you can try resetting the dishwasher’s control board. To do this, unplug the dishwasher from the power outlet for 30 seconds and then plug it back in.
• You can also refer to your dishwasher’s user manual for more detailed troubleshooting instructions.

The ER error code on a Monogram dishwasher can be caused by a number of factors. By following the troubleshooting steps above, you can often identify and resolve the issue yourself. However, if you are unable to resolve the issue, you will need to contact a qualified appliance repair technician.