Monogram Dishwasher Error Code E2

The E2 error code on a Monogram dishwasher indicates a failure of the water inlet valve. The water inlet valve is responsible for supplying water to the dishwasher during the wash cycle. If the valve fails, the dishwasher will not be able to fill with water and the cycle will not be able to complete.

Possible Causes:

• Faulty water inlet valve: The water inlet valve is a mechanical device that can wear out over time. If the valve is faulty, it may not be able to open or close properly, preventing water from flowing into the dishwasher.
• Low water pressure: The dishwasher requires a minimum water pressure of 20 psi to operate properly. If the water pressure is too low, the water inlet valve may not be able to open fully, preventing enough water from flowing into the dishwasher.
• Kinked water supply line: The water supply line that connects the dishwasher to the water supply may be kinked or damaged, preventing water from flowing freely.

Troubleshooting Tips:

• Check the water inlet valve operation: To check the operation of the water inlet valve, turn on the water supply to the dishwasher and listen for the valve to open. You should hear a clicking or buzzing sound. If you do not hear any sound, the valve may be faulty.
• Ensure proper water pressure: To check the water pressure, attach a pressure gauge to the water supply line that connects to the dishwasher. The pressure should be at least 20 psi. If the pressure is too low, contact your local water utility company to increase the pressure.
• Verify line connection: Inspect the water supply line for any kinks or damage. If you find any kinks or damage, repair or replace the line.

Additional Tips:

• If you have checked all of the possible causes and the error code persists, you may need to contact a qualified appliance repair technician.
• You can also consult your specific model’s user manual for detailed troubleshooting instructions.

Here is a more detailed and logical explanation of the E2 error code:

The E2 error code is caused by a failure of the water inlet valve. The water inlet valve is a mechanical device that is responsible for supplying water to the dishwasher during the wash cycle. The valve is controlled by the dishwasher’s control board, which sends a signal to the valve to open and close.

If the water inlet valve fails, it may not be able to open or close properly, preventing water from flowing into the dishwasher. This can be caused by a number of factors, including:

• Faulty water inlet valve: The water inlet valve is a mechanical device that can wear out over time. If the valve is faulty, it may not be able to open or close properly, preventing water from flowing into the dishwasher.
• Low water pressure: The dishwasher requires a minimum water pressure of 20 psi to operate properly. If the water pressure is too low, the water inlet valve may not be able to open fully, preventing enough water from flowing into the dishwasher.
• Kinked water supply line: The water supply line that connects the dishwasher to the water supply may be kinked or damaged, preventing water from flowing freely.

To troubleshoot the E2 error code, you can follow these steps:

1. Check the water inlet valve operation: To check the operation of the water inlet valve, turn on the water supply to the dishwasher and listen for the valve to open. You should hear a clicking or buzzing sound. If you do not hear any sound, the valve may be faulty.
2. Ensure proper water pressure: To check the water pressure, attach a pressure gauge to the water supply line that connects to the dishwasher. The pressure should be at least 20 psi. If the pressure is too low, contact your local water utility company to increase the pressure.
3. Verify line connection: Inspect the water supply line for any kinks or damage. If you find any kinks or damage, repair or replace the line.

If you have checked all of the possible causes and the error code persists, you may need to contact a qualified appliance repair technician.