Maytag Dishwasher lights flashing or blinking

Maytag Dishwasher lights flashing or blinking

Name: Appliance Repair Los Angeles
Telephone: 323-792-1970
Price range: $

Maytag Dishwasher Heating Element

The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.

Maytag Dishwasher Heating Element Assembly

The heating element assembly heats up the water to operating temperature. If the water doesn’t reach the correct temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element assembly has burned out, use a multimeter to test the heating element for continuity.

Maytag Dishwasher Water Inlet Valve

If the dishwasher lights are flashing or blinking, the cause could be a faulty water inlet valve. You can use a multimeter to test the valve’s solenoids for electrical continuity to help determine if the component is functioning properly or not.

Maytag Dishwasher Door Latch

A dishwasher’s lights flashing or blinking could indicate a problem with a micro switch inside the door latch assembly. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it or the entire latch assembly.

Maytag Dishwasher Control Board

The control board provides power to nearly every component of the dishwasher. It’s possible that the board has shorted and is causing the lights to flash or blink unexpectedly. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it’s likely the control board is at fault and will need to be replaced.

Maytag Dishwasher Main Control Board

The main control board provides power to nearly every component of the dishwasher. It’s possible that the board has shorted and is causing the lights to flash or blink. Check the owner’s manual for possible fault codes as one of the components may have failed. If the control board is not sending power to one of the components, it’s likely the main control board is at fault and will need to be replaced.

Check Fault Codes

If the dishwasher lights are flashing or blinking or there is a fault code in the display window, consult the wiring diagram, tech sheet, and/or user manual to find out more information about the error.

Maytag Dishwasher User Control and Display Board

The user control and display board is the component that allows the user to choose a dishwasher’s wash and dry setting. If the control and display board is defective, it could be causing the lights to flash or blink unexpectedly. If the control panel buttons were working intermittently prior to the lights flashing, it’s likely the user control and display board is at fault and will need to be replaced.

Maytag Dishwasher Drain Pump

The drain pump uses an impeller to force water through the drain hose. If the drain pump is not working, a light on the control panel might start flashing. To determine if the drain pump is defective, check the pump motor for continuity using a multimeter. If the motor does not have continuity, replace the drain pump. Drain pumps are not repairable—if the drain pump is defective, you must replace it.

Maytag Dishwasher Touchpad and Control Panel

First, confirm that the display is working. If the display is working, try pressing the touchpad buttons. If some of the buttons don’t respond correctly, it is possible that the entire touchpad and control panel is at fault. (Some manufacturers sell the touchpad separately from the control panel. Other manufacturers require that you purchase the touchpad and control panel together. If you cannot replace the touchpad individually, replace the touchpad and control panel.)

Maytag Dishwasher Touchpad

First, confirm that the display is working. If the display is still working, try pressing some of the touchpad buttons. If some of the buttons respond correctly but others don’t, it is likely that the touchpad is at fault. (Some manufacturers sell the touchpad separately from the control panel. Other manufacturers require that you purchase the touchpad and control panel together. If you cannot replace the touchpad individually, replace the touchpad and control panel.)

Maytag Dishwasher Control Panel

If the dishwasher lights are flashing or blinking, first confirm that the display is working. If the display is working, try pressing the control panel buttons. If some of the buttons don’t respond correctly, it is possible that the entire control panel is at fault and the component will need to be replaced.

Maytag Dishwasher buttons not working

Maytag Dishwasher Touchpad and Control Panel

First, ensure that the display works. If the dishwasher display is working but the some of the button don’t respond correctly, the touchpad and control panel might need to be replaced. (Some manufacturers sell the touchpad separately from the control panel. Other manufacturers require that you purchase the touchpad and control panel together. If you cannot replace the touchpad individually, replace the touchpad and control panel.)

Maytag Dishwasher Touchpad

First, confirm that the dishwasher display is working. If the display is still working, try pressing some of the touchpad buttons. If some of the buttons respond correctly but others don’t, it is likely that the touchpad is at fault. (Some manufacturers sell the touchpad separately from the control panel. Other manufacturers require that you purchase the touchpad and control panel together. If you cannot replace the touchpad individually, replace the touchpad and control panel.)

Incoming Power Problem

If there are no indicator lights or any noise from the dishwasher when it is turned on, it is likely that power is not reaching the dishwasher. Check the circuit breakers and GFCI (ground-fault circuit interrupter) outlets, if applicable, to confirm they have not tripped, or inspect any fuses to confirm none have blown. Since most dishwashers are hardwired (not plugged in) the junction box on the dishwasher should be checked for loose or burnt wires.

Dishwasher in lock mode

Many dishwashers have a child lock or “Sabbath” feature which will prevent the buttons from being used when the feature is engaged. The dishwasher could also be in “Demo” mode or another mode which prevents full operation. Consult the dishwasher’s user manual for information regarding locking/unlocking the control panel.

Maytag Dishwasher Door Latch

If the dishwasher buttons aren’t working, it’s possible the door latch is malfunctioning and preventing a wash cycle from being started. Inspect the door latch for any damage. you can also use a multimeter to test the micro switch inside the door latch for electrical continuity. If the switch does not have continuity, the switch or latch assembly should be replaced.

Maytag Dishwasher Main Control Board

The main control board regulates nearly every function in the dishwasher. If there is a problem with the main control board, it might not send voltage to the dishwasher touchpad, causing the touchpad buttons not to work. Control boards are often misdiagnosed; make sure you test more commonly defective parts before replacing the main control board.

Maytag Dishwasher Control Board

The control board regulates nearly every function in the dishwasher. If there is a problem with the control board, it might not send voltage to the dishwasher touchpad, causing the touchpad buttons not to work. Control boards are often misdiagnosed; make sure you test more commonly defective parts before replacing the control board.

Check Fault Codes

Maytag Dishwasher User Control and Display Board

The user control and display board is the component that allows the user to choose a dishwasher’s wash and dry setting. If some or all of the buttons aren’t working, you should first determine if the control works at all or if the display indicator lights are illuminated. If lights are illuminated or some of the control works, it’s likely the user control and display board is faulty and will need to be replaced. If no lights and no functionality is present, it’s more likely a door switch or main control board is at fault.

Maytag Dishwasher Control Panel

The control panel is the component that allows the user to choose a dishwasher’s wash and dry setting. If some or all of the buttons aren’t working, you should first determine if the control works at all or if the display indicator lights are illuminated. If lights are illuminated or some of the control works, it’s likely the control panel is faulty and will need to be replaced. If no lights and no functionality is present, it’s more likely a line fuse or main control board is at fault.

Maytag Dishwasher Door Switch

If the dishwasher buttons aren’t working, it’s possible a door switch is malfunctioning and preventing a wash cycle from being started. To determine if the door switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it.

Maytag Dishwasher Micro Switch

If the dishwasher buttons aren’t working, it’s possible a micro switch in the door latch is malfunctioning and preventing a wash cycle from being started. To determine if the micro switch is at fault, use a multimeter to test the switch for continuity. If the switch does not have continuity, replace it.

Maytag Dishwasher not draining

Clogged Sump Filters

There is usually a course and fine filter. If they are clogged, you will get low water flow and poor washability. To clean filters, remove them and wash with soap, warm water, and brush. If the filters cannot be cleaned effectively or if they are damaged, they will need to be replaced.

Maytag Dishwasher Drain Pump

The drain pump uses an impeller to force water through the drain hose. If the drain pump motor is not working, the dishwasher won’t drain. To determine if the drain pump is defective, check the pump motor for continuity using a multimeter. If the motor does not have continuity, or if is getting power but won’t run, replace the drain pump. Drain pumps are not repairable—if the drain pump is defective, you must replace it.

Maytag Dishwasher Control Board

A dishwasher’s control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the drain pump, preventing it from drawing the water out of the tank and forcing it through the drain hose to the garbage disposal or sink drain pipe.

Maytag Dishwasher Drain Impeller

The drain impeller pushes water through the drain hose and into the garbage disposer or drain line. If the impeller is broken, replace it.

Maytag Dishwasher Drain Solenoid Kit

The drain solenoid opens the drain valve to allow the water to exit the dishwasher. If the drain solenoid fails the valve will not open causing the dishwasher not to drain.

Maytag Dishwasher Drain Valve

Over time, the drain valve can get clogged with debris. To ensure that water can flow through the drain valve, clean out the valve. If the drain valve is clear of debris but it still won’t actuate, replace it. Drain valves are not repairable—if the drain valve is defective, you must replace it.

Maytag Dishwasher Main Control Board

A dishwasher’s main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the drain pump, preventing it from drawing the water out of the tank and forcing it through the drain hose to the garbage disposal or sink drain pipe.

Maytag Dishwasher Pump and Motor Assembly

The motor drives an impeller to force water out of the drain hose. If the motor runs during the drain cycle, check for a blockage in the drain line. If the motor won’t run during the drain cycle or if it just hums when it should be running, the pump and motor assembly might need to be replaced.

Clogged or Improperly Installed Garbage Disposer

If the garbage disposer was installed recently, the drain plug may not have been removed. All garbage disposers are sold with a solid plug in the drain tube. If the dishwasher is not connected to the garbage disposer, the plug must remain in the drain tube. However, if the dishwasher is connected to the garbage disposer, the plug must be removed. If the garbage disposer wasn’t replaced recently, it is possible that the disposer is clogged. Remove the dishwasher drain hose from the disposer and clean out both the fitting on the disposer and the end of the drain hose. These are the most common places to find an obstruction if the dishwasher won’t drain.

Maytag Dishwasher Drain Hose

The drain hose might be clogged. To unclog the drain hose, remove the drain hose from both the dishwasher and the sink drain and clean it out. The drain hose is most commonly clogged near the garbage disposer or dishwasher drain branch tailpiece.

Maytag Dishwasher Check Valve

The check valve prevents water from returning to the dishwasher after it has drained. If the valve gets stuck closed, it will prevent the water from draining. If the check valve is stuck closed, try cleaning it out and then replace it if necessary.

Maytag Dishwasher Check Ball

The check ball is a small plastic ball in the check valve that prevents water from returning to the dishwasher after the dishwasher has drained. If the check ball gets stuck, it will prevent water from draining through the check valve. If the check ball is stuck, try to free it.

Maytag Dishwasher Filter Assembly

A dishwasher’s filter assembly usually consists of both a course and a fine filter located in the sump. If one or both of these filters is clogged, the appliance will probably not drain properly. If the filters cannot be cleaned effectively or if they are damaged, they will need to be replaced.

Maytag Dishwasher Screen Filter

A dishwasher will usually have both a course and a fine screen filter located in the sump. If one or both of these filters is clogged, the appliance will probably not drain properly. If the filters cannot be cleaned effectively or if they are damaged, they will need to be replaced.

Maytag Dishwasher Strainer

Dishwashers will use a strainer located in the sump to catch food particles. If the strainer is clogged, the appliance will probably not drain properly. If the stainer cannot be cleaned effectively or is damaged, it will need to be replaced.

Maytag Dishwasher not cleaning

Maytag Dishwasher Water Inlet Valve

The water inlet valve opens to allow water to enter the dishwasher. If the valve is clogged or defective, the dishwasher won’t get enough water to clean dishes properly. If the water inlet valve is clogged, replace it. Do not attempt to clean the water inlet valve—cleaning the valve could make it more likely to fail.

Improper loading

Improper loading will keep the water from cleaning the dishes. Make sure you are leaving enough space between the dishes.

Improper water supply temperature

The water may not be hot enough. The recommended water supply temperature for a dishwasher to clean properly is 120 degrees Fahrenheit. If your hot water temperature is lower for safety reasons, try using a longer cycle that heats the water.

Maytag Dishwasher Center Wash Arm Assembly

The center wash arm circulates water to the dishes in the upper rack. If water can’t flow properly through the center wash arm, the dishes in the upper rack won’t be cleaned properly. Over time, food particles can get trapped in the tiny holes in the wash arm. If your dishes are coming out dirty, the wash arm might be clogged. To unclog the center wash arm, remove the wash arm and dislodge any debris from the holes. If the wash arm is extremely clogged, replace it. In addition, make sure that the center wash arm assembly is mating properly with the water supply nozzle.

Maytag Dishwasher Lower Wash Arm Assembly

The lower wash arm circulates water to the dishes in the lower rack. If water can’t flow properly through the lower wash arm, the dishes in the lower rack won’t be cleaned properly. Over time, food particles can get trapped in the tiny holes in the wash arm. If your dishes are coming out dirty, the wash arm might be clogged. To unclog the lower wash arm, remove the wash arm and dislodge any debris from the holes. If the wash arm is extremely clogged, replace it.

Maytag Dishwasher Lower Wash Arm

A dishwasher’s lower wash arm will spray water upwards as it rotates to clean the dishware during the wash and rinse cycles. If the wash arm is clogged with debris or damaged, the water won’t be able to jet upwards and the dishware won’t be cleaned effectively.

Maytag Dishwasher Upper Wash Arm Assembly

The upper wash arm circulates water to the dishes in the upper rack. If water can’t flow properly through the upper wash arm, the dishes in the upper rack won’t be cleaned properly. Over time, food particles get trapped in the tiny holes in the wash arm. If your dishes are coming out dirty, the wash arm might be clogged. To unclog the upper wash arm, remove the wash arm and dislodge any debris from the holes. If the wash arm is extremely clogged, replace it.

Clogged Sump Filters

Clogged Wash or Spray Arms?

If the dishwasher is not cleaning well, the holes in the wash or spray arms may be clogged with debris, not allowing water to spray out or the arm to turn. Most wash arms are removable for cleaning. You can clear out the holes with a paper clip or small brush and run water through the wash arm to help clear out the debris.

Maytag Dishwasher Heating Element

Some dishwashers use a heating element to heat the dishwasher during both the washing and drying cycles. If the heating element has failed, the dishwasher may not clean the dishes properly. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.

Maytag Dishwasher Control Board

A dishwasher’s control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.

Maytag Dishwasher Circulation Pump

The circulation pump uses a motor and impeller to force water up through the wash arms. If the circulation pump is defective, the dishes won’t be cleaned properly. If the motor isn’t making any noise or is just making a humming sound after the dishwasher has filled, the motor may be burned out. First, ensure that power is getting to the motor. Second, to ensure that the impeller can turn, check the pump housing for debris. If power is getting to the motor and the pump is clear of debris, the motor might need to be replaced. Be aware that the circulation pump may be challenging to replace, although many do-it-yourselfers have been successful with the replacement.

Maytag Dishwasher Pump and Motor Assembly

The motor drives an impeller to force water up through the wash arms. If the motor is defective, the pump impeller is broken, or some part of the pump is clogged, dishes won’t be cleaned properly. Make sure that power is getting to the circulation pump and motor. If power is getting to the pump and motor assembly but it still won’t run, replace the pump and motor assembly.

Maytag Dishwasher Wash Impeller

The wash impeller is a small plastic blade that forces water up through the wash arms. If the impeller is broken or is missing some of its fins, it might not generate enough pressure to force the water up through the wash arms. On most models, you can replace the wash impeller independently of the pump and motor assembly. Search for your model number to determine if your impeller is replaceable. If the impeller cannot be replaced separately, you will have to replace the entire pump and motor assembly.

Maytag Dishwasher Main Control Board

A dishwasher’s main control board provides power to nearly every electrical component in the dishwasher. A faulty board may be unable to supply power to the water inlet valve, preventing it from opening and allowing the necessary water to fill the tank.

Maytag Dishwasher Circulation and Drain Pump Motor

Too much detergent

Too much detergent with soft water will cause oversudsing and poor cleaning results. Adjust the amount of detergent being used to the water hardness and the cycle you choose. Always use fresh detergent.

Maytag Dishwasher Upper Wash Arm Spinner

Maytag Dishwasher Filter Assembly

A dishwasher’s filter assembly usually consists of both a course and a fine filter located in the sump. If one or both of these filters is clogged, you will get low water flow and poor washability. If the filters cannot be cleaned effectively or if they are damaged, they will need to be replaced.

Maytag Dishwasher Screen Filter

A dishwasher will usually have both a course and a fine screen filter located in the sump. If one or both of these filters is clogged, you will get low water flow and poor washability. If the filters cannot be cleaned effectively or if they are damaged, they will need to be replaced.

Maytag Dishwasher Strainer

Dishwashers will use a strainer located in the sump to catch food particles. If the strainer is clogged, you will get low water flow and poor washability. If the stainer cannot be cleaned effectively or is damaged, it will need to be replaced.

Maytag Dishwasher Major Issues

At Appliance Repair Los Angeles, we understand the frustration that comes with Maytag Dishwasher major issues. That’s why our team of highly skilled specialists is here to help you navigate through any challenges you may face with your dishwasher.

In this blog, we will explore common problems associated with Maytag Dishwashers and provide expert solutions to ensure your appliance operates at its best. From issues with water drainage to concerns about cleaning performance, we’ve got you covered.

Our dedicated professionals at Appliance Repair Los Angeles have extensive experience in diagnosing and resolving Maytag Dishwasher problems. Whether it’s a malfunctioning pump, a faulty spray arm, or any other major issue, we have the expertise to get your dishwasher back to optimal functionality.

Don’t let a malfunctioning Maytag Dishwasher disrupt your daily routine. Contact us today at 323-792-1970, and our friendly team will schedule a convenient appointment to assess and address the major issues affecting your appliance. Trust Appliance Repair Los Angeles for reliable and efficient solutions to keep your Maytag Dishwasher running smoothly. Stay tuned as we explore insightful tips and tricks to maintain your dishwasher’s performance in top-notch condition.

Maytag Dishwasher Error Code 12-5 or FCE5

Maytag Dishwasher Error Code 12-5 or FCE5

Encountering the Maytag Dishwasher Error Code 12-5 or FCE5 can be a perplexing experience, often leaving users puzzled about the source of the issue. This error specifically points to a problem with the dishwasher’s Wi-Fi antenna, a component crucial for enabling smart features and connectivity.

When faced with this error, the initial step is to unplug the dishwasher from the power source. This ensures a safe environment for inspection and potential repairs. The focus of attention shifts to the Wi-Fi antenna and its wiring connection to the Wi-Fi module.

A common culprit behind the error is a loose wiring connection to the Wi-Fi module. Carefully inspect the wires associated with the antenna, checking for any disconnections or loose ends. If such issues are identified, the remedy involves reconnecting the wires securely.

However, it’s not uncommon to encounter cases where the wiring itself is compromised. Broken wires can impede the flow of signals and contribute to the Wi-Fi antenna failure. In such instances, diligent repair work becomes necessary. Carefully mend any broken wires, ensuring a robust connection to restore functionality.

If, after thorough inspection and repair attempts, the error persists, the likelihood is that the Wi-Fi antenna itself needs attention. Replacement becomes the next logical step to ensure the seamless operation of smart features in your Maytag dishwasher.

Navigating through the intricacies of error codes requires a blend of technical know-how and hands-on expertise. If you find yourself grappling with the Maytag Dishwasher Error Code 12-5 or FCE5, and the troubleshooting steps seem daunting, seeking professional assistance is recommended. Our skilled technicians at Appliance Repair Los Angeles are equipped to diagnose, repair, and replace components, ensuring your Maytag dishwasher operates at its optimal best.

Maytag Dishwasher Error Code 12-3 or FCE3

Maytag Dishwasher Error Code 12-3 or FCE3 signifies a communication issue related to the dishwasher’s wireless connectivity. Specifically, it indicates that your dishwasher’s wireless module is unable to establish a connection with the internet through your wireless router.

This error is akin to a message from your dishwasher, stating that it cannot communicate with the broader network due to the absence of a working internet connection. In essence, the dishwasher relies on this connection for various functionalities, such as accessing software updates or interacting with smart features.

If you encounter this error, the first aspect to investigate is the status of your wireless router. The error suggests that the router itself is not connected to the internet. This could be due to a range of issues, from a temporary disruption in your internet service to a configuration problem with the router.

To address this, start by checking your router’s internet connection. Ensure that the router is properly connected to your internet service provider and that there are no issues with the external internet connection. You may want to restart your router to troubleshoot any potential temporary disruptions.

If the router seems to be functioning correctly, you might need to verify the wireless connection settings on your dishwasher. Ensure that the dishwasher is within the range of the wireless signal and that the correct network credentials are entered. Sometimes, a simple reconfiguration of the wireless settings on the dishwasher can resolve the communication issue.

In cases where the error persists despite these troubleshooting steps, it is advisable to consult the user manual for specific guidance or reach out to Maytag’s customer support. Professional technicians can also provide assistance in resolving complex communication issues and ensuring that your Maytag dishwasher operates seamlessly with its smart features.

Maytag Dishwasher Error Code 12-2 or FCE2

Encountering the Maytag Dishwasher Error Code 12-2 or FCE2 signals a communication hiccup between your dishwasher’s Wi-Fi module and your home’s wireless router. This error essentially indicates that the dishwasher is unable to establish a connection to the Wi-Fi network, hindering its ability to access smart features and remote functionality. Here’s a closer look at what this error means and how to address it:

When your Maytag dishwasher displays Error Code 12-2 or FCE2, it signifies a disruption in the communication link between the appliance and the wireless router. In today’s connected homes, dishwashers often come equipped with smart technology, allowing users to monitor and control their appliance remotely. This error arises when the dishwasher is unable to establish or maintain a connection to the designated Wi-Fi network.

Troubleshooting Steps:

To resolve this issue, refer to your Maytag dishwasher’s owner’s manual for detailed instructions on linking the dishwasher’s Wi-Fi module to your home’s wireless router. Follow these general steps:

Review the Owner’s Manual: Begin by carefully reviewing the owner’s manual that accompanied your Maytag dishwasher. Look for specific instructions on connecting the dishwasher to your Wi-Fi network.
Access Wi-Fi Settings: Navigate to the dishwasher’s control panel or interface to access the Wi-Fi settings. This is usually done through the appliance’s digital display.
Follow Step-by-Step Instructions: Adhere to the step-by-step instructions outlined in the manual for linking the dishwasher to your home’s wireless router. This may involve selecting your Wi-Fi network, entering the password, or other specified configurations.
Verify Network Stability: Ensure that your home’s wireless network is stable and operational. Issues such as a weak signal or network outages can impede the linking process.
Reattempt Connection: If the initial attempt fails, restart both the dishwasher and your wireless router. Then, repeat the linking process to establish a connection.

If despite following these steps the error persists, it may be prudent to seek professional assistance. A technician with expertise in Maytag appliances can provide a thorough assessment, ensuring that any underlying issues affecting the Wi-Fi connection are identified and resolved.

In summary, resolving the Maytag Dishwasher Error Code 12-2 or FCE2 involves carefully following the instructions in your owner’s manual to establish a seamless connection between your dishwasher and the wireless router, enabling you to fully leverage the smart features of your appliance.

Maytag Dishwasher Error Code 12-1 or FCE1

Encountering the Maytag Dishwasher Error Code 12-1 or FCE1 can be a perplexing situation, indicating a communication breakdown between the electronic control board and the Wi-Fi module. This error manifests as a hindrance in the seamless interaction essential for optimal dishwasher functionality. Here’s a detailed breakdown of the issue and steps to address it:

The error signifies a disruption in the dialogue between two crucial components—the electronic control board and the Wi-Fi module. For a modern dishwasher equipped with smart features, this communication is pivotal for efficient operation and remote control capabilities through Wi-Fi.

Troubleshooting Steps:

Power Down and Inspect:
- Begin by unplugging the dishwasher from the power source to ensure safety during inspection.
- Examine the wire harness connections between the electronic control board and the Wi-Fi module.
Wire Harness Check:
- Look for any visibly loose wires or connections that may have become dislodged.
- Reconnect any disconnected wires securely to reestablish the communication link.
Wire Repair:
- If you identify damaged wires during the inspection, initiate repairs promptly.
- Utilize appropriate tools to mend or replace the damaged sections of the wire.
Verification of Wiring Integrity:
- Ensure a thorough examination of the entire wire harness to rule out any potential hidden issues.
- Pay close attention to bends, pinches, or other factors that might compromise the wiring.
Wi-Fi Module Replacement:
- If the wiring appears intact and the error persists, it indicates a potential malfunction in the Wi-Fi module.
- Consider replacing the Wi-Fi module to restore seamless communication between components.

While the troubleshooting steps mentioned above are designed for users with a certain level of technical proficiency, it’s advisable to enlist the expertise of professional technicians for a comprehensive diagnosis and resolution.

Maytag Dishwasher Error Code 10-3 or FAE3

Encountering the Maytag Dishwasher Error Code 10-3 or FAE3 can be disconcerting, particularly when it points to a drying fan failure. Understanding this error is crucial for effective troubleshooting and resolution.

Error Description:

The 10-3 or FAE3 error code specifically indicates a malfunction in the drying fan of your Maytag dishwasher. The drying fan plays a pivotal role in expelling moist air, ensuring your dishes emerge dry and spotless at the end of the cycle.

Troubleshooting Steps:

1. Unplug the Dishwasher: Begin the diagnostic process by unplugging the dishwasher to ensure your safety and prevent electrical mishaps during inspection and repair.

2. Examine the Wiring: Inspect the wiring between the electronic control board and the drying fan. Over time, vibrations and usage can lead to loose connections. Reconnect any detached wires securely.

3. Check for Damaged Wires: Assess the condition of the wiring thoroughly. If you identify any frayed, severed, or damaged wires, it is crucial to address them promptly. Damaged wiring can compromise the efficiency of the drying fan.

4. Replace the Wire Harness: If the wiring is significantly damaged and reconnecting doesn’t suffice, consider replacing the wire harness. A new harness ensures a stable and secure electrical connection between the control board and the drying fan.

5. Verify Wiring Integrity: Once you’ve addressed loose or damaged wiring, double-check the integrity of the entire wiring system. Ensuring a sound electrical connection is paramount for resolving the drying fan failure.

6. Replace the Drying Fan: If the error persists after addressing wiring concerns, it may be indicative of a faulty drying fan. Replacing the drying fan is the next logical step. A malfunctioning fan can hinder the drying process, leaving dishes damp.

In conclusion, addressing the Maytag Dishwasher Error Code 10-3 or FAE3 involves a systematic approach to wiring inspection and potential component replacement, with a keen focus on ensuring the optimal function of the drying fan.