LG Dryer Error Code: FO
An FO error or a flashing “INSERT FILTER” on your LG Dryer’s display can be an unexpected hiccup in your laundry routine. But fear not, as this error is often simple to resolve. In this article, we’ll explore the FO error code and provide you with steps to troubleshoot it effectively.
What Does the FO Error Code Mean?
The FO error code is your dryer’s way of telling you that something’s amiss with the lint filter. It’s essentially saying, “Check the lint filter; it’s not inserted properly!” When the lint filter isn’t securely in place, the dryer’s sensor detects this and displays FO on the screen. To get your dryer back up and running, follow these steps:
Troubleshooting the FO Error Code:
- Locate and Remove the Lint Filter:
To begin addressing the FO error code, you’ll first need to find the lint filter. It’s typically located within the dryer’s door area, near the opening where you load your laundry. Look for a rectangular or square-shaped screen that can be easily pulled out. This is the lint filter.
- Inspect the Lint Filter:
Once you’ve removed the lint filter, take a close look at it. Check for any visible lint or debris buildup on the filter. Over time, lint can accumulate and block the airflow. A clogged filter can trigger the FO error code, so it’s crucial to ensure it’s clean.
- Clean the Lint Filter:
If you find lint or debris on the filter, it’s time to clean it. You can use a soft brush or a lint brush designed for this purpose. Gently brush away the lint from both sides of the filter. Alternatively, you can rinse the lint filter under running water until it’s thoroughly clean. However, make sure the filter is completely dry before reinserting it into the dryer.
- Reinsert the Lint Filter:
Carefully place the lint filter back into its housing. Ensure that it fits securely and snugly into the slot or compartment from which you removed it. You should feel or hear it click into place when it’s properly seated.
- Restart the Dryer:
With the lint filter securely in its place, it’s time to restart your LG Dryer. Power it on, select your desired settings, and initiate a drying cycle. If you’ve successfully addressed the issue, the FO error code should no longer be displayed, and your dryer should resume its normal operation.
What If the Error Persists?
If, after following these steps, the FO error code continues to appear on the display screen, it may indicate a more complex issue with the lint filter sensor or another part of the dryer itself. In such cases, it’s advisable to contact LG customer support or a certified appliance technician for a professional diagnosis and repair.
Regular maintenance of your dryer, including cleaning the lint filter after each use, can help prevent error codes and ensure the efficient and safe operation of your appliance. We hope this detailed troubleshooting guide assists you in resolving the FO error code on your LG Dryer effectively.
LG Dryer Error Code: E13
An E13 error code on the LG Dryer’s display indicates that the drain hose is kinked, crushed, clogged, or that the water pump is frozen. The E13 error code will only display on Hybrid Condensing Dryers.
If the E13 error code is showing on the LG Dryer’s display, make sure the drain hose is not kinked, twisted, or clogged with water at the end of the hose. If the drain hose is extended, the dryer will not drain well because of the increased resistance. It is recommended to only use the standard LG drain hose.
Press START/PAUSE button to start the dryer again after checking that the drain hose is not kinked, twisted, or clogged. If the E13 error code occurs again, the unit will require a repair service.
LG Dryer Error Code: DE
A DE error code means that the LG Dryer door is not completely closed. This might be the result of the door not completely closed or misaligned. Open the door and make sure the filter is pushed all the way in and that there are no articles of clothing stuck on the door.
If the unit is brand new, check whether there is any noticeable damage on the frame of the unit (for example: the door is bent) If so, please contact the dealer.
If the problem is not dent or damage, reset the unit by unplugging it from power, or trip the circuit breaker. Wait for 4 seconds then plug the unit back in. Close the door firmly, select any cycle, and press start. If the unit displays the DE error code again, the unit will need service.
LG Dryer Error Code: PS
This error code indicates an issue with the voltage supply to the dryer, specifically improper voltage with the power cord. Here’s the recommended check and repair procedure:
- Check Wire Connections: Ensure that the white and red wire connections are not reversed on the dryer’s terminal block. In other words, make sure the white (neutral) and red (hot) wires are connected correctly.
- Verify Power Cord: Inspect the power cord for any visible damage or frayed wires. If you notice any issues, replace the power cord.
- Check Outlet Voltage: Use a voltage tester or multimeter to measure the voltage at the electrical outlet where the dryer is plugged in. It should be within the specified voltage range (usually 120 volts for most residential dryers).
- Check Circuit Breaker/Fuse: Ensure that the circuit breaker or fuse for the dryer’s electrical circuit is not tripped or blown. Reset or replace it if necessary.
Always prioritize safety when dealing with electrical appliances, and if you’re unsure about any aspect of troubleshooting or repair, seek professional assistance.
LG Dryer Error Code: nP
An nP error code on the LG Dryer’s display indicates that there is a problem with the electrical wiring in the home, and that no current is being detected at the heater. Here’s what you can do:
- Check the power cord connection – Make sure the power cord is securely plugged into a grounded outlet matching the LG Dryer’s rating plate of 240V.
- Reset the circuit breaker – From the home’s main, turn off the circuit breaker for at least 10 seconds to clear the power surge inside the breaker.
- Inspect the home outlet – If the nP error code is displaying, the home’s outlet may need to be checked by a licensed electrician in order to ensure that the correct voltage is being supplied to the LG Dryer.
- Request a repair – If the LG Dryer is still not heating at this stage, the unit requires a repair service.
Remember to always prioritize safety when dealing with electrical appliances. If you’re not comfortable or experienced in handling electrical issues, it’s best to seek professional assistance to avoid any potential hazards.
LG Dryer Error Code: d75, d80, d90, and d95
What Do the D80, D90, and D95 Error Codes Mean?
If your control panel is displaying D80, D90, or D95 error codes, this means that the airflow through your ventilation system has been obstructed by a buildup of lint. The higher the number after the “D,” the more obstructed it is. When these error codes appear, your dryer will turn off to avoid overheating.
Dealing with these error codes properly is very important, as one of the most common causes of house fires in the U.S. is overheating dryers.
How to Fix LG Dryer Error Code D80
When your LG dryer is displaying the D80 error code, this means that you have a ventilation blockage of 80%. This indicates that your air exhaust is not able to push enough air out from your dryer. The main cause of this problem is a buildup of lint in the exhaust hose or another part of the ventilation system.
Here’s how to resolve the D80 error code:
- Clean out the lint filter – make sure you remove all of the lint before putting it back into place.
- Disconnect the exhaust hose (it’s at the back of the dryer). Once disconnected, check to see if it is blocked up, and if so, remove the loose debris/lint from it.
- Check the wall duct for blockages, and if you find any, remove them.
- Check the outside vent for any blockages, and if you find any, remove them.
- At this point, you should have found the blockage and removed it, and the error code will then disappear. If need be, you can turn your dryer off and on to remove the error code.
How to Fix LG Dryer Error Code D90
If your LG dryer is displaying the D90 error code, it means that your ventilation system is restricted by 90%. When this happens, your dryer’s airflow will not be strong enough to circulate the hot air out of your dryer and through your vent.
To remove the error code and get your dryer working again, you need to:
- Start by cleaning out the lint filter – make sure you remove all the lint before putting it back into place.
- Disconnect the exhaust hose (it’s at the back of the dryer). Once disconnected, check to see if it is blocked up, and if so, remove the loose debris/lint from it.
- Check the wall duct for blockages, and if you find any, remove them.
- Check the outside vent for any blockages, and if you find any, remove them.
- At this point, you should have found the blockage and removed it, and the error code will then disappear. If need be, you can turn your dryer off and on to remove the error code.
How to Fix LG Dryer Error Code D95
When the display panel on your LG dryer displays the D95 error code, it means that your ventilation system is restricted by 95%. When this happens, your dryer’s airflow will not be strong enough to circulate the hot air out of your dryer and through your vent.
To remove the error code and get your dryer working again, you need to:
- Clean out the lint filter.
- Once the lint filter is cleaned, disconnect the exhaust hose (it’s at the back of the dryer), and check to see it is blocked up. If you find a blockage, remove the loose debris from the hose. Using a vacuum cleaner is a great way to quickly remove any debris.
- Once you’ve checked the hose, inspect the wall duct for blockages, and if you find any, remove them.
- If you still haven’t found the blockage, check the outside vent for any blockages, and if you find any, remove them.
- Hopefully, at this point, you’ve found the blockage and removed it. The error code should disappear. If not, turn the dryer off and on, and this should hopefully remove the error code.
LG Dryer Error Codes
LG is a renowned brand in the appliance industry, known for its innovation and commitment to delivering top-notch products. LG Dryers are no exception, but even the most reliable appliances can encounter issues over time. That’s where the experts at Appliance Repair Los Angeles come in. In this blog, we will explore the common error codes you might encounter with LG Dryers and provide insights on diagnosing and troubleshooting these issues.
Understanding LG Dryer Error Codes:
LG Dryers are equipped with a sophisticated error code system that helps users and technicians identify and address problems efficiently. These error codes are displayed on the appliance’s control panel, making it easier to pinpoint the issue. Here are some common LG Dryer error codes and their meanings:
| Error Code |
What it Means |
| d75, d80, d90, and d95 |
Blocked airflow |
| nP |
Problem with the electrical |
| PS |
Improper voltage |
| DE |
Door switch error |
| E13 |
Drain hose is kinked |
| FO |
INSERT FILTER |
| HS |
HUMIDITY SENSOR |
| PF |
Power outage |
| tE1, tE2, tE3 |
Problem dryer’s thermistor |
| gAS |
Problem with the gas supply |
| CL |
Child Lock Display |
| Add |
Add Water |
| CD |
Cooling Down |
If you ever encounter one of these codes and are unsure how to proceed, don’t hesitate to contact us. Our experienced technicians will diagnose the issue and provide reliable solutions to get your LG Dryer back in working order, ensuring you can enjoy the convenience of your appliance once more. Stay tuned for more informative content on appliance maintenance and troubleshooting.
LG Washing Machine Won’t Open
Your LG washer has door lock which ensures that the door remains closed during the wash cycle, thus preventing water leakage. By default, the door won’t open when the wash cycle is in progress.
However, under unusual circumstances, your LG washer door may get stuck even when it is turned off. This issue is most common on LG front-loader washers.
This guide explains why this happens and how to unlock your LG washing machine door when it doesn’t open normally.
LG Washing Machine Door Locked
If your LG washing machine door gets locked, do this to unlock it: First, reset your washer. If this does not work, check the child lock and disable it if it is accidentally enabled. Also, try to inspect and tighten the drain hose, door lid switch, and washer timer.
We will explain these fixes in detail.
Reset your Washing Machine
Your LG washer door is mostly locked or stuck and won’t open due to technical glitches in its program or board. This issue can be quickly resolved by simply resetting your washer.
So, the first step in troubleshooting your LG washer when its door gets locked is to reset it.
Disable Child Lock
The latest LG washing machines have a child lock, a safety feature. When the child lock is activated, it prevents the washer door from unlocking or the wash cycle from accidental start.
If the child lock is engaged on your LG washer, it will be displayed on its display. So, disable the child lock and try to unlock your washing machine door.
Inspect and Tighten Drain Hose
The drain hose is where the used water is pumped out of the washer. If your washing machine cannot drain the water, the door won’t open.
So, if your LG washer door gets stuck, then it’s most probably due to the drain hose, which is either damaged or loose.
To check the drain hose, first, disconnect your LG washing machine from the power source. Then, access the drain hose and make sure it is properly tightened in its place. Also, check it for any clogs or obstructions.
Check the Door Lid Switch
The door latch switch on the LG washing machine is designed to prevent the door from opening during the wash cycle.
If this switch malfunctions during the cycle, your washing machine door might get locked.
The door latch or lid switch is located beneath the control board. So if your LG washer is under warranty, do not try to test it yourself, as it will void its warranty.
Even if your washer warranty period is over, I’d recommend seeking a professional help to test or replace the door latch switch on your LG washer.
Check your Washer Timer
If your LG washing machine is automatic or semi-automatic, its functions depend on the timer. The timer may be displaced due to normal wear and tear if your LG washer is old.
When the timer on your LG washer is faulty or displaced, it will prevent the door from unlocking after the wash cycle is completed.
Testing and replacing the washing machine timer is not something we recommend doing yourself, so always seek professional help.
LG Washing Machine Not Taking Fabric Conditioner
If your washer is not taking in fabric conditioner, check for the following:
- Clean potential buildup of fabric conditioner – fabric conditioner residual may have formed in the machine’s conditioner slot and it needs to be cleaned out (Use warm water plus a clean cloth).
- Dilute the conditioner– Your fabric conditioner might be too thick so the machine can’t really ‘accommodate’ it. Try to dilute it a little with water (you can add one part of water).
Quick Tip: To prevent these problems, always use the fabric conditioner recommended by LG (see your owner’s manual).
LG Washing Machine Won’t turn on
You load your washer, close the lid, and press start. Nothing. Your LG top load washer won’t turn on. Even if you’re on top of basic washer maintenance, washers can break down from time to time. Luckily, there are problems you can check yourself before calling in the experts.
TOP 4 Reasons Your LG TOP Load Washer Won’t Turn ON
A washing machine that won’t start is a major inconvenience. To make troubleshooting easy, we made a list of the top four issues that cause a washer to not turn on:
Incoming Power Problem
The very first thing to check when your LG top load washer won’t turn on is the power supply. There are a few ways to check if power is getting to your washer.
Make sure any light switches that may control electrical outlets are on. Also, try resetting the circuit breaker. Do this by turning off the correct switch for 5 seconds and turning it back on.
You should also test the outlet with another electronic that you know works. If none of these steps show results, start troubleshooting issues with the unit itself.
Washer Needs Hard Reset
Sometimes appliances just need a little reboot. If your LG washing machine won’t start, try doing a hard reset on the unit.
To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button. Plug your washer back in and see if it turns on.
If the hard reset didn’t do the trick, there may be a bigger problem.
Washer Lid Switch Failure
A common reason why an LG top load washer won’t turn on is because of the washer lid switch. This switch is a safety feature that prevents the washer from cycling when the door isn’t closed.
If the lid switch is broken, then your washer won’t start – even if the door is closed. To see if it’s working correctly, listen for a click when you close the washer lid. If you don’t hear it, then the lid switch may be responsible for your LG top load washer not starting and needs to be replaced.
Washer Control Board Defective
Another thing to check on a top load washer not working is the control board. See if the display board is working. If it has power but not displaying anything, then it needs replacement.
Next, press each button to see if any of them work. If some buttons work, but others don’t, then the control board isn’t working right. Replacing the control board will fix the problem.
