Kenmore Refrigerator Not Cooling

Kenmore Refrigerator Not Cooling

Name: Appliance Repair Los Angeles
Telephone: 323-792-1970
Price range: $

01 – Condenser Coils are Dirty

The condenser coils are usually located under the refrigerator. They dissipate heat as refrigerant passes through them. If the condenser coils are dirty, they won’t dissipate the heat effectively. As debris builds up on the coils, the refrigerator becomes less efficient, causing the refrigerator to work harder to cool down. If the coils are significantly dirty, the refrigerator will not be able to maintain the proper temperature. Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them.

02 – Freezer or refrigerator temperature is set too high

Verify the freezer temperature is set between 0 and 5 degrees Fahrenheit (-18 to -15 Celsius). Verify the refrigerator temperature is set between 34 and 40 degrees Fahrenheit (1 to 5 Celsius). After reseting the temperature wait 24 hours for the temperature to adjust appropriately.

03 – Kenmore Refrigerator Condenser Fan Motor

The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly. To determine if the fan motor is defective, first check the fan blade for obstructions. Next, try turning the fan motor blade by hand. If the blade does not spin freely, replace the condenser fan motor. If no obstructions are present and the fan blade spins freely, use a multimeter to test the fan motor for continuity. If the condenser fan motor does not have continuity, replace it.

04 – Kenmore Refrigerator Evaporator Fan Motor

The evaporator fan motor draws air over the evaporator (cooling) coils and circulates it throughout the refrigerator and freezer compartments. Some refrigerators have more than one evaporator fan motor. On refrigerators with only one evaporator, the evaporator is located in the freezer compartment. If the evaporator fan is not working, it will not circulate the cold air to the refrigerator compartment. If this occurs, the freezer may still get cold, while the refrigerator will not get cold. To determine if the evaporator fan motor is defective, try turning the fan blade by hand. If the fan blade does not turn freely, replace the fan motor. Additionally, if the motor is unusually noisy, replace it. Finally, if the motor does not run at all, use a multimeter to test the motor windings for continuity. If the windings do not have continuity, replace the evaporator fan motor.

05 – Kenmore Refrigerator Door Gasket

A refrigerator door gasket should form an airtight seal around the appliance’s frame to keep the cold air in and the warm air out. If the door gasket is twisted or torn, gaps can form that will allow warm air in, resulting in the refrigerator not cooling properly. Inspect the door gasket for any damage and replace with a new one if necessary.

06 – Incoming Power Problem

Ensure plug is tightly pushed into electrical outlet and outlet is supplying power. Check fuses or circuit breaker if needed. It is best to have the refrigerator on a seperate dedicated circuit. If the refrigerator is connected to a ground fault receptacle it may need to be plugged into a regular receptacle. Using a ground fault receptacle for a refrigerator is not recommended.

07 – Kenmore Refrigerator Damper Control Assembly

On many refrigerator models, a damper control assembly is used to control the air flow from the freezer compartment to the refrigerator compartment to maintain the appropriate air temperature. If a refrigerator is not cooling properly, it’s possible the damper door is stuck closed. Inspect the damper control assembly for any malfunction and replace it with a new one if necessary.

08 – Sealed System Problem

If all the refrigeration components seem to be working, but the refrigerator is not cooling properly there may be a restriction or leak in the refrigeration system. To determine this, you will need to remove the evaporator cover and observe the frost pattern on the coil. Note: The compressor, condenser and evaporator fans should all be running, and the condenser coil should be clean and have good air flow. There should be light frost on most of the coil. If the coil has frost or ice buildup in only one section, there is likely a restriction or leak in the system. This repair is expensive (maybe cost prohibitive) and should be diagnosed and repaired by a qualified technician.

09 – Kenmore Refrigerator Start Relay

The start relay works in conjunction with the start winding to start the compressor. If the start relay is defective, the compressor may sometimes fail to run or may not run at all. As a result, the refrigerator will not be cold enough. To determine if the start relay is defective, use a multimeter to test it for continuity between the run and start terminal sockets. If the start relay does not have continuity between the run and start terminal sockets, replace it. In addition, if the start relay has a burnt odor, replace it.

10 – Kenmore Refrigerator Control Board

The control board might be defective. However, this is almost never the cause. Before replacing the control board, test all of more commonly defective parts. If none of the other components are defective, consider replacing the control board.

11 – Kenmore Refrigerator Temperature Control Thermostat

The temperature control thermostat directs voltage to the compressor, evaporator fan motor, and condenser fan motor (if applicable). If the temperature control thermostat is not working properly, it may prevent the refrigerant system from running. To determine if the thermostat is defective, rotate the thermostat from the lowest setting to the highest setting and listen for a click. If the thermostat clicks, it is not likely defective. If the thermostat does not click, use a multimeter to test the thermostat for continuity. If the temperature control thermostat does not have continuity at any setting, replace it.

12 – Kenmore Refrigerator Inverter Board

The inverter board is the component that cycles the compressor on and off. You can use a multimeter to test if power is reaching the compressor. If no power is reaching the compressor, the inverter board is likely defective and should be replaced.

13 – Kenmore Refrigerator Defrost Heater Assembly

The defrost heater assembly turns on several times throughout the day to melt away any frost that may have accumulated on the evaporator coils. If the defrost heater assembly is defective, the defrost system will not work, and frost will continue to accumulate on the evaporator coils. This will result in the refrigerator not cooling properly. To determine if the defrost heater is defective, use a multimeter to test it for electrical continuity. If the defrost heater does not have continuity, replace it.

14 – Kenmore Refrigerator Start Capacitor

The start capacitor provides a boost of power to the compressor during start-up. If the start capacitor isn’t working, the compressor may not start. As a result, the refrigerator will not cool. To determine if the start capacitor is defective, test it with a multimeter. If the start capacitor is defective, replace it.

15 – Kenmore Refrigerator Defrost Thermostat

The defrost thermostat monitors the temperature of the evaporator coils. When the coils drop below a set temperature, the thermostat contacts close to allow power to flow to the defrost heater during the defrost cycle. In the defrost cycle, the defrost heater melts away any frost that may have accumulated on the evaporator coils. If the defrost thermostat is defective, the defrost heater may not activate. This will cause the evaporator coils to frost over resulting in the refrigerator not cooling properly. To determine if the defrost thermostat is defective, use a multimeter to test it for electrical continuity. If the defrost thermostat does not have continuity when it reaches the low temperature of its operating range, replace it.

16 – Kenmore Refrigerator Thermistor

The thermistor monitors the refrigerator temperature and sends the temperature reading to the control board. The control board regulates power to the compressor and evaporator fan based on the thermistor readings. If the thermistor is defective, the compressor and evaporator fan may not run when necessary. As a result, the refrigerator will not be cold enough. To determine if the thermistor is defective, test it with a multimeter. The thermistor resistance should change in conjunction with the refrigerator temperature. If the thermistor resistance does not change, or the thermistor does not have continuity, replace the thermistor.

17 – Kenmore Refrigerator Temperature Control Board

The temperature control board provides voltage to the compressor and fan motors. If the temperature control board is defective, it will stop sending voltage to the cooling system. However, this is not a common occurrence. Control boards are often misdiagnosed—before replacing the control board, first test all of the more commonly defective components. If none of the other components are defective, consider replacing the temperature control board.

18 – Kenmore Refrigerator Compressor

The compressor is a pump which compresses the refrigerant and circulates the refrigerant through the evaporator and condenser coils. If the compressor is not working, the refrigerator won’t cool. However, this is rarely the case. Before replacing the compressor, first check all of the more commonly defective parts. If you have determined that all of the other components are working properly, check the compressor. Use a multimeter to test the continuity between the electrical pins on the side of the compressor. If there is an open circuit, the compressor is likely defective. If the compressor is defective, it must be replaced by a licensed technician.

19 – Kenmore Refrigerator Main Control Board

The main control board might be defective. However, this is almost never the cause. Before replacing the main control board, test all of more commonly defective parts. If none of the other components are defective, consider replacing the main control board.

20 – Kenmore Refrigerator Start Device

A start device, like a start relay, works in conjunction with the start winding to start the compressor. If the start device is defective, the compressor may sometimes fail to run or may not run at all. As a result, the refrigerator will not be cold enough. To determine if the start device is defective, use a multimeter to test it for continuity between the run and start terminal sockets. If the start device does not have continuity between the run and start terminal sockets, replace it. In addition, if the start device has a burnt odor, replace it.

Kenmore Refrigerator Major Issues

Kenmore has a rich history of producing top-notch kitchen and home appliances. Their refrigerators are designed with cutting-edge technology to keep your food fresh and your drinks cold. Kenmore offers a wide range of refrigerator models, from side-by-side and French door to top-freezer and bottom-freezer options. With features like smart connectivity and energy efficiency, Kenmore refrigerators are a popular choice for many households.

If you’re facing major issues with your Kenmore refrigerator, you don’t have to deal with it alone. Our team of expert technicians at Appliance Repair Los Angeles is here to assist you. Whether your Kenmore refrigerator is not cooling, leaking water, making strange noises, or displaying any other major issues, we have the knowledge and experience to diagnose and resolve these problems.

For reliable and efficient Kenmore refrigerator repair services in the Los Angeles area, don’t hesitate to reach out to us. We understand the importance of a fully functioning refrigerator in your daily life, and we’re committed to getting your appliance back in working order as quickly as possible.

Contact Appliance Repair Los Angeles at 323-792-1970 to schedule an appointment with our experienced technicians. We’re just a phone call away, ready to address any major issues with your Kenmore refrigerator and ensure it continues to serve your needs effectively.

Kenmore Refrigerator Error Code E Od

Kenmore Refrigerator Error Code E Od

The E Od error code on your Kenmore refrigerator signifies that there is a problem with the Wi-Fi modem. The Wi-Fi modem is a crucial component responsible for connecting your refrigerator to your home network and enabling smart features, such as remote monitoring and control.

Common Causes of the E Od Error:

The Wi-Fi modem’s failure can be attributed to several factors:

Wiring Connection Issues: Loose or damaged wiring connections between the Wi-Fi modem and the display control board can disrupt communication and trigger the E Od error.
Wi-Fi Modem Malfunction: Over time, the Wi-Fi modem itself may experience technical failures or malfunctions that render it non-operational.

Steps to Diagnose and Address the E Od Error:

If you encounter the E Od error on your Kenmore refrigerator, here are the steps to troubleshoot and potentially resolve the issue:

Unplug the Refrigerator: Safety is paramount. Before attempting any troubleshooting, unplug the refrigerator from the electrical outlet.
Inspect Wiring Connections: Examine the wiring connections between the Wi-Fi modem and the display control board. Look for loose, disconnected, or damaged wires. If you find any issues, carefully reconnect or replace the wires as necessary.
Reset the Refrigerator: Sometimes, resetting the refrigerator can clear the error code. Unplug the refrigerator for a few minutes and then plug it back in.
Replace the Wi-Fi Modem: If the error persists after checking the wiring connections and performing a reset, it’s likely that the Wi-Fi modem is malfunctioning. You may need to replace it.
Replace the Display Control Board: In some cases, the issue may be with the display control board itself. If replacing the Wi-Fi modem doesn’t resolve the problem, consider replacing the display control board.

If you’ve attempted these steps and are unable to resolve the E Od error, or if you’re uncomfortable making these repairs on your own, it’s advisable to contact professional appliance repair technicians. They have the knowledge and experience to diagnose the specific issue accurately and perform the necessary repairs, ensuring that your Kenmore refrigerator’s connectivity is restored.

Kenmore Refrigerator Error Code Er CO

The Er CO error code on your Kenmore refrigerator is related to communication problems between two essential components: the main board (control board) and the display board (user interface). This error can disrupt the operation of various functions within your refrigerator.

Loose Wiring Connections: Over time, wiring connections can become loose or disconnected due to vibrations or general wear and tear.
Faulty Control Boards: A malfunctioning main board or display board can lead to communication errors. These components can fail for various reasons, including electrical surges or manufacturing defects.

Before calling a professional technician, there are a few steps you can take to troubleshoot the Er CO error:

Check Wiring Connections: Inspect the wiring connections between the main board and the display board. Make sure they are securely connected. If you find any loose or disconnected wires, reattach them.
Reset the Refrigerator: Sometimes, a simple reset can resolve the communication error. Unplug the refrigerator for a few minutes and then plug it back in. This action can clear minor glitches.

If the Er CO error persists after checking wiring connections and attempting a reset, or if you suspect a faulty control board, it’s best to seek professional assistance. Communication errors between critical components are often best addressed by experienced technicians who can diagnose the specific issue and replace the necessary parts. Trying to replace control boards without the right skills and tools can be complex and may result in further damage.

Kenmore Refrigerator Error Code Er CF

The Er CF error code on your Kenmore refrigerator points to a problem with the condenser fan motor. The condenser fan motor is responsible for dissipating heat from the refrigerator’s condenser coils, which helps maintain the optimal temperature inside the appliance.

Common Causes of the Er CF Error:

Defective Condenser Fan Motor: The primary cause of the Er CF error is a malfunctioning condenser fan motor. This can disrupt the cooling process and lead to temperature irregularities.
Issues with Wiring: Problems with the wiring connected to the condenser fan motor can also trigger this error code. Loose or damaged wires can interrupt the motor’s operation.
Control Board Problems: The control board in your refrigerator, which regulates various components, can be responsible for the error. A malfunction in the control board can affect the condenser fan motor’s performance.

DIY Solutions for the Er CF Error:

While addressing the Er CF error often requires professional expertise, there are a few initial steps you can take for troubleshooting:

Check for Obstructions: Ensure that there are no obstructions blocking the condenser fan. Remove any debris or foreign objects that may be hindering its operation.
Inspect Wiring: Examine the wiring connected to the condenser fan motor. Make sure all connections are secure, and there are no visible damages to the wires.
Power Cycle the Refrigerator: Sometimes, a simple power cycle can reset the error. Unplug the refrigerator for a few minutes and then plug it back in.

If the Er CF error persists after attempting the above steps, or if you suspect a defective condenser fan motor or control board, it’s best to contact appliance repair professionals. A qualified technician can diagnose the specific issue, whether it’s a motor replacement or control board repair, and perform the necessary tasks to get your Kenmore refrigerator running efficiently again.

Kenmore Refrigerator Error Code Er FF

The Er FF error code indicates that there’s a problem with the refrigerator’s evaporator fan. This fan is responsible for circulating cold air throughout the freezer and refrigerator compartments to maintain proper temperature levels. When the fan encounters issues, it can lead to temperature imbalances, potentially causing your food to spoil.

DIY Solutions for Er FF Error:

While resolving the Er FF error may necessitate professional assistance, here are a few steps you can take for initial troubleshooting:

Inspect the Fan: Check the evaporator fan by opening the freezer compartment. If it’s not running, this could be a sign of a fan motor issue.
Reset the Refrigerator: Try resetting the refrigerator by unplugging it for a few minutes and then plugging it back in. This can sometimes clear error codes caused by temporary glitches.

If the Er FF error persists after the basic troubleshooting steps or if you suspect a more complex issue, it’s advisable to contact experienced professionals. A skilled technician can identify the specific problem, whether it’s a defective fan motor, control board, or wiring harness. They’ll then perform the necessary repairs to restore your Kenmore refrigerator to its optimal functionality.

Kenmore Refrigerator Error Code Er IF

The Er IF error code typically indicates that there is an issue with the fan responsible for maintaining the optimal temperature and ice production in the refrigerator’s ice compartment. This error can be triggered by a variety of problems related to the icing fan.

Common Causes of the Er IF Error:

Blocked or Icing Fan: Sometimes, the icing fan may be obstructed or covered with ice, preventing it from operating correctly.
Defective Ice Fan Motor: The motor that powers the icing fan may be malfunctioning, causing it to stop working.
Wiring Issues: Any defects or damage to the electrical wiring within the circuit that controls the icing fan can lead to the Er IF error.
Control Board Failure: In some cases, the error code may indicate that the control board, which regulates the fan’s operation, has failed.

DIY Solutions for Er IF Error:

While addressing the Er IF error may require professional assistance in some cases, you can attempt a few steps to troubleshoot the problem:

Inspect the Icing Fan: Open the ice compartment and check if the icing fan is blocked or covered with ice. If so, carefully remove any obstructions and defrost the fan.
Reset the Refrigerator: Sometimes, a simple reset can clear the error code. Unplug the refrigerator for a few minutes and then plug it back in.

Kenmore Refrigerator Error Code F dH

The F dH error code indicates that the sensor in your Kenmore refrigerator’s defrost system did not reach a temperature above 40°F during the defrost cycle. This error can disrupt the normal operation of your refrigerator, potentially leading to issues with cooling and food preservation.

Common Causes of the F dH Error:

Faulty Fuse: A blown fuse in the defrost system can prevent the sensor from reaching the desired temperature.
Defective Heater: The defrost heater is responsible for melting frost and ice buildup in the freezer. A malfunctioning heater can lead to temperature issues and trigger the error code.
Control Board Problems: The control board regulates the defrost cycle. Malfunctions in the control board can disrupt the defrost process.

DIY Solutions for F dH Error:

While some F dH error causes may require professional assistance, you can attempt some preliminary troubleshooting:

Reset the Refrigerator: Start by unplugging the refrigerator for a few minutes and then plugging it back in. Sometimes, this simple reset can resolve minor issues.
Check the Defrost Heater: Inspect the defrost heater for any visible damage, such as burnt-out sections or breaks. If you notice damage, the heater may need replacement.
Examine the Control Board: Ensure that the control board is functioning properly. Look for any signs of burnt or damaged components. If you find problems, you may need to replace the control board.

When to Call the Professionals:

If the error persists after attempting these DIY solutions, or if you’re unsure about diagnosing and fixing the issue on your own, it’s advisable to contact professional appliance repair technicians. They have the expertise and tools to accurately identify the problem causing the F dH error and perform the necessary repairs.

Kenmore Refrigerator Error Code Er gF

The Er gF error code on your Kenmore refrigerator typically relates to water supply problems. It signifies that the appliance is detecting an issue with water pressure or the flow of water. This error can disrupt the functionality of features like the ice maker and water dispenser.

Common Causes of the Er gF Error:

Low Water Pressure: Low water pressure can lead to inadequate water flow. It may be caused by a partially closed water supply valve, a clogged water filter, or issues with your home’s water supply.
Water Inlet Valve Problems: The water inlet valve is responsible for regulating the flow of water into your refrigerator. If it’s malfunctioning, it can trigger the Er gF error.
Blocked Water Lines: Obstructions or kinks in the water lines can restrict water flow and trigger the error code.

DIY Solutions for Er gF Error:

While some issues leading to the Er gF error may require professional assistance, there are a few steps you can take to troubleshoot the problem:

Check Water Supply Valve: Ensure that the water supply valve is fully open. It should provide sufficient water pressure to the refrigerator.
Inspect Water Lines: Examine the water lines for any kinks or obstructions. Straighten them out and remove any blockages.
Replace Water Filter: If your refrigerator has a water filter, it may be clogged. Replace it as recommended by the manufacturer.
Reset the Refrigerator: Sometimes, a simple reset can clear the error code. Unplug the refrigerator for a few minutes and then plug it back in.

When to Call the Professionals:

If you’ve tried the above steps and the Er gF error persists, or if you’re not comfortable making repairs on your own, it’s best to reach out to professionals. A qualified technician can diagnose the specific issue causing the error, whether it’s a faulty water inlet valve, a malfunctioning flow meter, or another component. They will then perform the necessary repairs to get your Kenmore refrigerator back to working order.

Kenmore Refrigerator Error Code Er It

Er It, in Kenmore refrigerators, typically denotes a system error inside the ice maker. This error code indicates that there may be a malfunction or a failure within the ice maker’s self-test routine. The ice maker in Kenmore refrigerators is a sophisticated component responsible for producing ice cubes, and when it encounters an issue, it can trigger this error code.

Self-Test Ice Maker Routine:

The self-test ice maker routine is a built-in diagnostic feature in many Kenmore refrigerators. It allows the ice maker to check its various functions and components. When the ice maker detects a problem during this routine, it triggers the Er It error code. The self-test routine helps the refrigerator identify issues such as temperature irregularities, sensor malfunctions, or mechanical problems within the ice maker.

Resolving Er It Error:

If you encounter the Er It error code on your Kenmore refrigerator, here’s what you can do:

1. Power Cycle: Start by turning off your refrigerator for a few minutes and then turning it back on. This simple step can sometimes reset the ice maker and clear the error code.
2. Check for Obstructions: Inspect the ice maker for any obstructions that might be preventing it from functioning correctly. Remove any ice buildup or debris that could be interfering with its operation.
3. Professional Help: If the error persists, it’s advisable to seek assistance from a professional technician. Kenmore refrigerators can be complex, and resolving error codes often requires expert knowledge of the appliance.

Understanding and addressing Kenmore Refrigerator Error Code Er It is essential to keep your refrigerator in optimal working condition. The self-test ice maker routine helps diagnose issues early, allowing for timely repairs.