Jenn-Air Range display board not working
Jenn Air Range/Stove/Oven Oven Control Board
The oven control board displays the time, temperature, and settings for the range. If the oven control board has power to it but the display is dead, missing digits or dim, it will need to be replaced.
Jenn Air Range/Stove/Oven Display Board
If the display board is dead it may not be getting power from the main control board. If there is power to the display board but the display is dead, missing digits or dim, it will need to be replaced.
Jenn Air Range/Stove/Oven LED Board
The range’s LED board will usually display the time, temperature, and settings for the range. If the display only partially shows digits or is dim, it’s likely the LED board is faulty and should be replaced (if the whole display is not working, a defective control board is more likely the cause of the problem).
Jenn Air Range/Stove/Oven Main Control Board
The main control board sends power to the display board to operate. If the display board is not receiving power, the main control board is likely bad and will need to be replaced.
Incoming Power Problem
Electric ranges require 240 volts of alternating current. Gas ranges require 120 volts. If the display board is not working, there could be an incoming power problem. For a gas range, if the oven light comes on and the burner sparks the range has power. For an electric range, turn on one of the surface elements. If any of the surface elements are working, the range has power. If the range does not have power, check for a tripped circuit breaker or blown fuses and correct as needed.
Range in lock mode
Many ranges have a child lock or “Sabbath” feature which will prevent the buttons from being used when the feature is engaged. The range could also be in “Demo” mode or another mode which prevents full operation. Consult the range’s user manual for information regarding locking/unlocking the control panel.
Jenn Air Range/Stove/Oven Control Board
For many ranges, the control board interacts directly with the display to show the time, temperature, and settings for the range. If the control board has power to it but the entire display is not working, the control board is likely at fault and will need to be replaced.
Jenn Air Range/Stove/Oven Control Panel
The range’s control panel will usually display the time, temperature, and settings for the range. If the control panel has power to it but the display is dead, missing digits or dim, it will need to be replaced.
Jenn Air Range/Stove/Oven Radiant Surface Element
If some of the range’s main display is still working, but the surface element “hot” indicator light does not, it’s likely a radiant surface element is defective. You can use a multimeter to test the radiant element for electrial continuity to help determine if the part is faulty.
Jenn Air Range/Stove/Oven Surface Element Switch
If some of the range’s main display is still working, but the surface element “on” indicator light does not, it’s likely a surface element switch is defective. You can use a multimeter to test the surface element switch for electrial continuity to help determine if the part is faulty.