Jenn-Air Dishwasher Error Code 6-2 or F6E2

Encountering the error code 6-2 or F6E2 on your Jenn-Air dishwasher indicates a potential water inlet valve failure. Here’s a detailed guide on how to troubleshoot and address this issue on your own:

1. Disconnect Power:

Ensure safety by unplugging your dishwasher to disconnect it from electrical power before attempting any troubleshooting.

2. Access the Front Panels:

Remove the bottom front access panel and toe panel to gain access to the internal components of the dishwasher.

3. Check Wire Harness Connections:

Inspect the wire harness connections on the water inlet valve. Look for any loose or disconnected wires. If you find any, reconnect them securely.

4. Replace Damaged Wire Harness:

If the wire harness is damaged, it’s crucial to replace it. A damaged wire harness can disrupt the flow of electrical signals, contributing to the error code.

5. Measure Resistance:

Use a multimeter to check the resistance of the water inlet valve. A functional valve should show approximately 1,400 ohms of resistance. If you measure infinite resistance, it indicates a faulty water inlet valve that needs replacement.

6. Replace the Water Inlet Valve:

If the resistance test confirms an issue, replace the water inlet valve. A malfunctioning valve can hinder the proper flow of water into the dishwasher, leading to error codes.

7. Further Troubleshooting:

If the problem persists after addressing the water inlet valve, consider checking the electronic control board. Replace it if necessary, as a malfunctioning control board can contribute to error codes.

DIY Conclusion: By following these step-by-step instructions, you can troubleshoot and address the Jenn-Air dishwasher error code 6-2 or F6E2 associated with water inlet valve failure. Regular maintenance and prompt DIY solutions can help ensure the efficient performance of your dishwasher. If the issue persists or you are uncomfortable with the troubleshooting process, it’s advisable to seek professional assistance.