GE Dryer Noisy Operation

GE Dryer Noisy Operation

There are normal sounds or noises that may occur when using your dryer. There could also be a sound or noise that may not be normal. The following lists both normal and abnormal dryer sounds.

Sounds that are normal:

• A squeak when the dryer is started. This start-up squeak should go away after the first few seconds of operation.
• The sound of the drum as it turns.

Sounds that are not normal:

• A thumping sound.
• A humming sound.
• A squeak that develops after the dryer has heated up but is not heard when the dryer is cool.
• A squeaking that is very short and repeats every few seconds (like a chirping sound).

To minimize the possibility of electric shock, unplug this appliance from the power supply before attempting any maintenance or cleaning.

If you are hearing sounds or noises that are not normal, please check the following:

• Some start-up squeak is normal. The sound should go away after the first few seconds of operation. If the sound continues, we recommend you contact service.
• Gas dryers may produce a buzzing when the solenoid valve opens. The valve clicks at the start of the heat cycle, start of ignition and when the burner turns off. The flame makes a low roaring sound.
• Make sure your dryer is level, is on a solid, secure floor and that nothing is leaning against the dryer.
• Check all exposed screws and make sure they are tight. Loose cabinet screws may cause a squeaking sound.
• Check for foreign objects below the lint filter:
  • Remove the lint filter and look down into the opening.
  • If you need to stick your hand down into the opening to remove an object, be careful because the edges of the opening could be sharp.
  • We advise wearing a pair of work gloves if you do need to reach down and remove an object from the lint filter opening.
• Foreign objects caught in the drum front seal and worn or loose drum slides can cause a metal scraping noise as the drum rotates. We recommend you contact service to fix this.
• Check for foreign objects in the drum like coins, paper clips, etcetera. Buttons and zippers will make a rattling or scraping sound as they roll around in the dryer drum.
• A frayed or damaged dryer belt will make a thumping sound, which would require service.

If your dryer is making unusual noises and the above suggestions do not resolve the situation, discontinue use of the dryer until it has been checked by a qualified servicer. Continued use may cause wear of other parts, making the repair more costly.

GE Dryer Won’t Start

GE Dryer Won’t Start

When you’re General Electrics, GE dryer won’t start a cycle, the natural instinct is to panic. After all, it’s not a simple case of replacing the heating element or checking that the right mode is selected. At this stage, your GE machine doesn’t simply feel faulty. It feels broken. However, while the immediate impacts are huge (you won’t be able to dry any clothes until the situation is resolved), the dryer repair procedures may deliver a quicker fix than you imagine.

Is Your GE Dryer Not Working?

A GE dryer that won’t start can take several forms. The most likely issues are;

• The General Electrics dryer won’t turn on.
• It will power up, but you can’t choose a mode.
• The mode is selected but the spin won’t start.
• The power starts but then cuts out.

In any case, the GE dryer not working properly will cause a great deal of stress. The following troubleshooting steps will help you regain control.

Check the Power Source

When the GE dryer simply won’t turn on, your first task is to check the power links. Firstly, then you may want to try plugging the machine into a different power outlet to check that the problems aren’t caused by the socket itself. A loose or burned power cord will cause similar problems.

Similarly, checking the fuse in the plug is a key step that could save you a lot of time and hassle. The GE dryer needs two legs of 120V. It is possible that one of them has been tripped. Therefore, turning off the breaker to cause a reset may fix the troubles too.

Inspect the Door

A dryer can only work when the door is registered as shut. If the door switch has become damaged, such as bent out of position, it will prevent the dryer from working. The WE1M1011 latch will fix this fault as well as machines that shut off too soon.

Inspect the Timer Knob

When you turn the timer knob and feel a little resistance, you will naturally feel that this part of the dryer works correctly. In reality, the knob turn counts for very little if it fails to initiate the switch. Remove the knob to look for damage.

If you suspect that this is your problem, you can turn the switch with a pair of pliers. If the GE dryer subsequently runs, you have identified the issue. Find a replacement knob and install it by hand.

Check the Backsplash

The backsplash is the panel that holds buttons and controls in place. Due to the fact that it’s manufactured out of plastic (as is the case on most dryers from all manufacturers), the GE backsplash can become damaged. The tabs associated with the busiest buttons, such as the on/off switch, may need replacing.

Carefully remove the three screws to take the panel off and check the condition of the backsplash and its switches. If anything is broken, it is best to replace the whole WE19M1777 part. As with broken switches, faults will stop the machine from working in spite of the fact that the drum, sensors, and other features are in good health.

Inspect the Fuse

A thermal fuse functions as a safety device in that it will blow when overheated to prevent damage to more integral features. When it does blow, the GE dryer won’t work. A multimeter test should show 0 ohms or very close to this figure.

Replacing a broken fuse will allow the machine to work once more. However, the underlying issues must be addressed too. Blown thermal fuses usually indicate problems with the dryer’s vent. Debris and blockages may be restricting airflow and causing unnecessary overheating.

Test The Drive Belt

When the drive belt is broken, many machines will power on but won’t run. Modern GE models are among those that won’t turn on when the drive belt is faulty. The drive belt problems are easier to spot when using a dryer that turns on but won’t spin the drum. However, a visual inspection and trying to spin the drum by hand should offer clarity.

A new drive belt should fix the problem. However, you may want to check the condition of the belt switch too as this is another issue that can cause the GE dryer to stop working until the feature has been fixed.

Check the Motor

The drive motor on your GE dryer may cause the machine to stop working. Alternatively, you may notice a humming sound during cycles. Use a multimeter test (on the Rx1 setting) to test for consistency of the terminals before then checking the bare metal of the motor. Both tests should show readings of 0. If they don’t, replace the motor.

Test The Terminal Block

When the dryer stops working again due to a replacement fuse or circuit breaker problem in the electrical panel, the terminal block may be at fault. This is the part that connects internal wires to the power cord, and can subsequently suffer overheating. A burning smell is another symptom that can be linked to this issue.

The blown fuse and breaker trip will have stopped the GE dryer from working. However, fixing those symptoms without addressing the underlying terminal block faults could pose a fire hazard in the long run. Find the panel above the power cord on the rear of the machine, and inspect the terminals for signs of burning.

Replace the Control Board

When all other components are in good health, failing power or an inability to start can be attributed to the control board, particularly if you have previously noticed that the dryer has a burning smell when it does work.

GE Dryer Overheating

GE Dryer Overheating

01 – GE Dryer Heating Element

GE Dryer No Heat or Not Drying Clothes

GE Dryer No Heat or Not Drying Clothes

Step 1 – Check the thermal fuse 

When fixing a GE dryer that isn’t heating, the best place to start is to check the thermal fuse. The thermal fuse turns your dryer off when it overheats. However, sometimes it can do this for no reason, which stops your dryer from heating at all.

This is how you check the thermal fuse:

1. Unplug your dryer and pull it away from the wall.
2. Remove the panels so you can access the internal components. If you’re not sure how to do this, consult your user manual.
3. Locate the thermal fuse. It’s usually attached to the blower housing.
4. Test the thermal fuse with a multimeter to ensure it has continuity.
5. If the fuse passes the test, proceed to the next step. If it fails the test, replace it.
6. If you replace the fuse, plug your dryer in and turn it on to check that it now heats properly. If it doesn’t, proceed to the next step. Note: To stop the new fuse from blowing in the future make sure you clean out the exhaust vent regularly.

Step 2 – Check the power sources

The next step is to check the incoming power sources. Your GE dryer requires two legs of 120 volts AC (a total of 240 volts) to work. If the circuit breaker or fuses that provide power to your dryer trip, the incoming power source to your dryer can become infringed or cut off completely, which prevents the dryer from heating.

Here’s how to check the incoming power sources to ensure they’re working correctly:

1. Inspect your circuit breakers to ensure the one responsible for sending power to the dryer hasn’t tripped. If it has, turn it back on.
2. Use a multimeter to test the voltage coming from the circuit breaker and fuses. If it’s not high enough the power source that isn’t working properly will need to be repaired or replaced. If you determine that the power sources are fine, proceed to the next step.
3. Once the circuit breaker and fuses are working properly, run your dryer to check if the problem has been solved. If it hasn’t, proceed to the next step.

Step 3 – Check the gas valve solenoid

The next step is to check the gas valve solenoid. If your dryer is electric, proceed directly to step 6. Your gas-powered dryer has two or more solenoid coils that open to supply gas to the burner. When they don’t correctly open, your GE dryer won’t heat up.

To check that the gas valve solenoid is working, you need to:

1. Remove the panels so you can access the internal components. Find the gas valve solenoid.
2. You shouldn’t turn the power to your dryer off because you’ll need power for the test. But you do need to pull it away from the wall.
3. Attempt to ignite the gas and observe the igniter. Check if it glows and ignites the gas or if it glows and doesn’t ignite the gas. If it doesn’t ignite the gas, the solenoid is faulty and will need to be replaced. If the gas does ignite, the solenoid is working and you can proceed to the next step.
4. If you replace the solenoid, run your dryer to check if the problem has been solved. If it hasn’t, proceed to the next step.

Step 4 – Make sure the igniter works

The next step is to check the igniter. The igniter is responsible for igniting the gas when you turn your dryer on. If the igniter fails, your dryer won’t heat up.

Here’s how to make sure the igniter is working:

1. Unplug your dryer and turn off the gas.Then pull the dryer away from the wall.
2. Remove the panels so you can access the internal components.
3. Locate the igniter and use a multimeter to test whether it has continuity.
4. If the igniter passes the test, proceed to the next step. If it fails the test, replace it.
5. If you replace the igniter, run your dryer to check that it now heats properly. If it doesn’t, proceed to the next step.

Step 5 – Make sure the flame sensor works

The purpose of the flame sensor is to monitor the heat coming from the flame to ensure your dryer is at the correct temperature. If it stops working your dryer won’t heat up.

Here’s how to make sure the flame sensor is working:

1. Unplug your dryer and turn off the gas.Then pull the dryer away from the wall.
2. Remove the panels so you can access the internal components.
3. Locate the flame sensor and use a multimeter to test whether it has continuity.
4. If the sensor passes the test, proceed to the next step. If it fails the test, replace it.
5. If you replace the flame sensor, run your dryer to check that it now heats properly. If it doesn’t, proceed to the next step.

Step 6 – Make sure the heating element works

The next step is to test the heating element. The heating element is how your dryer heats the air that is then distributed throughout the dryer. If the heating element stops working your dryer will too.

Here’s how to make sure the heating element is working:

1. Unplug your dryer and pull it away from the wall.
2. Remove the panels so you can access the internal components.
3. Locate the heating element and use a multimeter to test whether it has continuity.
4. If the heating element passes the test, proceed to the next step. If it fails the test, replace it.
5. If you replace the heating element, run your dryer to check that it now heats properly. If it doesn’t, proceed to the next step.

Step 7 – Make sure the high-limit thermostat is working

The purpose of the high-limit thermostat is to monitor the temperature in your dryer and send a signal to the control board to turn the dryer off if it overheats. If the thermostat stops recording accurate temperatures or stops working completely, your dryer won’t be able to heat up.

Here’s how to make sure the high limit thermostat is working:

1. Unplug your dryer and pull it away from the wall.
2. Remove the panels so you can access the internal components.
3. Locate the high-limit thermostat and use a multimeter to test whether it has continuity.
4. If the high-limit thermostat passes the test, proceed to the next step. If it fails the test, replace it.
5. If you replace the high-limit thermostat, run your dryer to check that it now heats properly. If it doesn’t, proceed to the next step.

Step 8 – Make sure the cycling thermostat is working

The other thermostat in your dryer is called a cycling thermostat. This thermostat monitors the temperature in your dryer during each cycle and tells the main control board to turn the heat on or off. This regulates the air temperature during each cycle. When the cycling thermostat stops working, your dryer will either not heat to the right temperature or not heat at all.

Here’s how to make sure the cycling thermostat is working:

1. Unplug your dryer and pull it away from the wall.
2. Remove the panels so you can access the internal components.
3. Locate the cycling thermostat and use a multimeter to test whether it has continuity.
4. If the thermostat passes the test, proceed to the next step. If it fails the test, replace it.
5. If you replace the cycling thermostat, run your dryer to check that it now heats properly. If it doesn’t, proceed to the next step.

Step 9 – Make sure the timer is working

The next step is to check that your dryer’s timer is working. The timer doesn’t become defective very often, but if all of the other components covered in this guide work properly, you should now test the timer.

Here’s how to make sure the timer is working:

1. Unplug your dryer and pull it away from the wall.
2. Remove the panels so you can access the internal components.
3. Locate the timer and use a multimeter to test whether it has continuity.
4. If the timer passes the test, proceed to the next step. If it fails the test, replace it.
5. If you replace the timer, run your dryer to check that it now heats properly. If it doesn’t, proceed to the next step.

Step 10 – Replace the main control board

The final option is to consider replacing the main control board. They don’t become faulty very often but if you’ve ruled out every other possible cause, replacing it is your last option to get your dryer heating properly again. Alternatively, you might decide to just purchase a new dryer instead.

Ge Dryer Major Issues

Ge Dryer Major Issues

Owners of GE dryers appreciate how convenient and reliable these appliances can be. However, like any other piece of equipment, GE dryers can experience issues. In this article, we will discuss the common problems you might encounter and introduce you to trusted professionals who can assist you with these difficulties.

1. No Heat or Not Drying Clothes
2. Overheating
3. Won’t Start
4. Noisy Operation
5. Drum Not Turning
6. Timer or Control Panel Issues
7. Loud Vibration or Shaking
8. Burning Smell

In case of any of the above-mentioned issues with your GE dryer, don’t hesitate to seek professional assistance. You can reach out to Appliance Repair Los Angeles at 323-792-1970 for expert help, ensuring a quick and effective resolution of problems with your dryer. Don’t compromise the safety of your home when you have reliable specialists ready to assist you.

Ge Dryer Error Code: 009

Ge Dryer Error Code: 009

GE Dryer Error Code 009 can signal an issue with the drive motor and its associated components. Here’s a comprehensive guide on addressing this error code:

When the Drive Motor Won’t Run:

1. Begin by unplugging the dryer for safety. Examine the drive motor and its connections for any loose or disconnected wires. Reconnect any wires that are not securely in place.
2. Inspect the wire harness for any signs of damage or wear and tear. If it’s damaged, it’s essential to replace it to ensure proper electrical connections.
3. Investigate any drive system components that might be impeding the smooth rotation of the drum. Replace any worn or damaged drive system components that could be causing the issue.
4. If the wiring and drive components are confirmed to be in good condition, the next step is to replace the drive motor itself.

When the Dryer Motor Won’t Shut Off:

If you encounter a situation where the dryer motor won’t shut off unless the dryer is unplugged, it may indicate a relay on the main control board is stuck. In this case, the main control board must be replaced to resolve the issue.

For professional assistance with diagnosing and resolving GE Dryer Error Code 009, or any other dryer-related concerns, don’t hesitate to contact Appliance Repair Los Angeles. Our skilled technicians are at your service, ready to provide expert solutions to ensure your dryer operates flawlessly.

Ge Dryer Error Code: 008 or 00d

Ge Dryer Error Code: 008 or 00d

GE Dryer Error Codes 008 or 00D can be an indication of a door switch issue. Let’s elaborate on how to address this problem eloquently:

PROBLEM: Door Switch Not Opening; 5 Cycles Ran Without Door Switch Activation

In the world of dryer maintenance, the door switch plays a pivotal role. Error codes 008 or 00D may present themselves when the door switch fails to activate during the dryer’s operation, causing a disruption in the normal drying cycle.

FIX: Unleash the Power of Precision

Your first step is a mindful one—unplug the dryer to ensure safety. Once done, embark on a journey of precision.

1. 1. Investigate: Begin by meticulously inspecting the door switch and its surrounding connections. Any dislodged or loose wires should be reconnected securely. For a thorough examination, pay close attention to the wire harness. If any signs of damage become evident, it’s time for a replacement.
2. 2. Replacement: If the wires appear to be in satisfactory condition but the error code persists, it’s time to consider replacing the door switch itself. This small but crucial component holds the key to resuming seamless dryer functionality.

Elegance, precision, and efficiency are the hallmarks of maintaining your GE Dryer. Ensuring that the door switch operates seamlessly is vital for the dryer’s smooth performance.

Ge Dryer Error Code: 007

Ge Dryer Error Code: 007

GE Dryer Error Code 007 can be triggered when the Neutral “N” and Line 2 “L2” electrical connections are reversed. To resolve this issue, follow these essential steps:

Check and Repair: The error code may be due to the reversal of the Neutral and Line 2 connections on the dryer’s terminal block at the back of the unit. To rectify this, carefully rewire the power cord connections according to the correct installation instructions. If you require guidance, consult your appliance manual for precise directions.

Replacement Parts: Fortunately, there’s no need for replacement parts in this case. The solution lies in rewiring the terminal block correctly to ensure the dryer functions optimally.

Ge Dryer Error Code: 006

Ge Dryer Error Code: 006

GE Dryer Error Code 006 signals a potential issue with the control panel, specifically the buttons. To address this error and get your dryer back in working order, follow these steps:

1. Button Check: Start by pressing each button on the control panel to ensure none are stuck. A stuck button could trigger the error code. If you find a stuck button, gently free it to resolve the issue.
2. Unplug and Inspect: If the code persists after checking the buttons, unplug the dryer for safety. Thoroughly inspect the control panel components for any damage. Damaged buttons or connections could lead to the error. If you identify damaged components, consider replacing them.
3. Main Control Board: If the control panel components appear to be in good condition, the main control board might be the culprit. In such cases, it’s advisable to replace the main control board to restore proper dryer functionality.

For professional assistance with diagnosing and resolving GE Dryer Error Code 006, or for any other appliance-related concerns, turn to Appliance Repair Los Angeles.

Ge Dryer Error Code: 005

Ge Dryer Error Code: 005

GE Dryer Error Code 005 may appear on your dryer’s display, indicating a potential issue with the main control board. To address this error, follow these steps:

1. Check and Repair: Begin by disconnecting the power to your dryer for approximately 5 minutes. This brief power interruption can sometimes reset the main control board and eliminate the error code. If the reset doesn’t resolve the issue, proceed to the next step.
2. Replacement Parts: If the error code persists after attempting the reset, it may be necessary to replace the main control board. This component plays a vital role in the dryer’s operation and can impact its overall performance.

For professional guidance and assistance with diagnosing and resolving GE Dryer Error Code 005, don’t hesitate to reach out to Appliance Repair Los Angeles. Our experienced technicians are ready to provide expert solutions, ensuring your dryer operates at its best.