GE Dishwasher Burning Smell
GE Dishwasher Drain Valve
The drain valve will often use a solenoid to open the valve to allow the water to exit the dishwasher. Since the solenoid is an electrical component, it can short out and produce a burning smell. You should inspect the solenoid for any burn marks near the terminals. You can also use a multimeter to test the drain valve solenoid for electrical continuity to determine if the component is able to function properly. If the solenoid is faulty, the entire drain valve assembly may need to be replaced.
GE Dishwasher Heating Element
The heating element may be shorted, causing a burning smell. In most cases when the element shorts out, it will have blisters or raised sections on it; in other cases a shorted element will break in half. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.
GE Dishwasher Timer
On some dishwasher models, the timer determines when power is sent to the various components of the dishwasher. If the timer receives a power surge, or a component fails, the timer can short-out causing a burning smell. Inspect the timer for burn marks. A damaged timer will need to be replaced.
GE Dishwasher Control Board
The control board provides power to the various components of the dishwasher. If the control board receives a power surge, or a component fails, the control board can short-out causing a burning smell. Inspect the control board for burn marks. A burnt control board will need to be replaced.
GE Dishwasher Pump and Motor Assembly
The circulation pump uses a motor and impeller to force water up through the wash arms during the dishwasher’s wash and rinse cycles. If the motor has burned out or is in the process of failing, it can produce a burning smell. You can often tell that a circulation pump motor has burned out if the motor isn’t making any noise or is just making a humming sound after the dishwasher has filled.
GE Dishwasher Drain Solenoid Kit
The drain solenoid opens the drain valve to allow the water to exit the dishwasher. Since the solenoid is an electrical component, it can short out and produce a burning smell. You should inspect the solenoid for any burn marks near the terminals. You can also use a multimeter to test the solenoid for electrical continuity to determine if the component is able to function properly.
GE Dishwasher Main Control Board
The main control board provides power to the various components of the dishwasher. If the control board receives a power surge, or a component fails, the control board can short-out causing a burning smell. Inspect the control board for burn marks. A burnt control board will need to be replaced.
Items on Heating Element
On dishwashers with exposed heating elements, plastic or wood items like forks, spoons, and lids can fall through the racks and onto the element. When the element comes on in the dry cycle the items can melt or burn causing a smell. Remove any items that may have fallen onto the heating element.
GE Dishwasher Power Cord
If the power connections in the junction box are not secure the wire can overheat, melting the coating on the wires. Check to ensure the connections are tight and not burnt. If the connectors are burnt the wires will have to be cut and reconnected securely.
GE Dishwasher Control Module
The control module allows voltage to be sent to the various components of the dishwasher. If the control module receives a power surge, or a component fails, the module can short-out or overheat and cause a burning smell. Inspect the module for signs of damage or burn marks and replace if necessary.