Frigidaire Dryer Dryer Not Turning On

Frigidaire Dryer Dryer Not Turning On

Name: Appliance Repair Los Angeles
Telephone: 323-792-1970
Price range: $

Do you have a Frigidaire dryer that won’t turn on? Nothing can be more frustrating than throwing some damp clothes in your dryer, trying to turn it on, and thinking to yourself “why won’t my dryer turn on?” Luckily for you, we’ve gathered some simple ways to troubleshoot this common problem.

Check for These Issues If Your Frigidaire Dryer Won’t Turn On

#1 – Dryer Not Getting Power

Your Frigidaire dryer may not be starting for a simple reason; it might not be getting power. Check that the power cord is plugged in and isn’t sitting loose in the outlet. Also, make sure that your dryer isn’t plugged in using an extension cord.

Another thing to check is whether your circuit breaker has tripped. If so, it will need to be reset for your dryer to start running again.

#2 – Dryer Door Not Closed All the Way

If your Frigidaire dryer stopped working, another thing to double-check is whether the dryer door is fully latched shut. Your dryer won’t start running unless it’s firmly latched shut due to safety reasons.

Pro Tip: Always be careful to avoid slamming the door closed as this is a common cause of dryer not starting issues.

#3 – Wrong Cycle Options Selected

If your Frigidaire dryer won’t turn on, there could be another issue such as having the wrong options selected. Some of these options include the delayed start option, a control lock, or the child lock feature.

Each dryer is different and runs its own way. First, be sure to press the start button firmly and hold for a few seconds. If that doesn’t work, reference your model’s use and care guide. It can show you how to disengage any of the options above that prevent it from starting right up.

#4 – Faulty Dryer Start Switch

And speaking of the start button, the switch behind the start button in the main control panel could be where your problem lies. This start switch is engaged when you press the start button, and if it fails, your dryer won’t start.

Listen for the “click” sound when you press the start button. If you don’t hear it, the start switch may be broken. You can use a multimeter to test the switch for continuity and replace it if you find that it’s faulty.

#5 – Blown Frigidaire Dryer Thermal Fuse

If your Frigidaire dryer won’t turn on, the most common issue has to do with your thermal fuse. This piece of the dryer is designed to shut the unit down if it gets too hot and begins to overheat. One of the most common causes of a blown thermal fuse is clogged dryer vents. Be sure to inspect them for excess lint and debris to avoid future breakdowns and safety issues.

Access the thermal fuse and test is using a multimeter. If you don’t find continuity, the part will need to be replaced. This component is also a common culprit when your dryer won’t heat up, so take any steps you can to avoid overheating.

Frigidaire Dryer No Heat or Insufficient Heat

When your dryer won’t heat it can be really frustrating- clothes take forever to dry, or they may not dry at all. There are several things you can take a look at to try to determine the cause of your Frigidaire dryer not heating. We’ll walk you through how to check things out.

How To Fix A Frigidaire Dryer Not Heating

Overloading

Is your Frigidaire dryer not heating? You may be filling it with too many items at once. When your dryer is filled to capacity with wet clothes, they don’t always have enough space to allow sufficient air circulation. Without proper air circulation, your dryer cannot dry efficiently.

Although this seems obvious, when we have a ton of laundry piled up, it’s easy to get overzealous and try to squeeze too much into the loads in an effort to save time.

Try filling your dryer with fewer clothes to see if that solves the problem.

Clogged Dryer Vent

A clogged dryer vent is one of the most common culprits behind any dryer not heating. If you have a dryer not drying clothes in a reasonable time, this could be why.

Cleaning a dryer vent is important to improve the efficiency of your dryer and reduce the risk of a fire. Here are some steps you can follow to clean a dryer vent:

Disconnect the dryer from the power source and turn off the gas (if applicable).
Remove the lint filter from the dryer and clean it along with the lint trap area with a flexible soft-bristled appliance brush.
Locate the dryer vent on the back of the dryer and use a screwdriver to loosen the screws that secure the vent in place.
Once the vent is loose, use a vacuum with a hose attachment to remove any lint or debris from the vent and the area around it.
Use a dryer vent brush to scrub the inside of the vent and remove any remaining lint.
Reattach the vent and secure it with the screws.
Turn the power and gas back on and run the dryer on a high heat setting for about 15 minutes to help remove any remaining lint.
Check the vent outside of your home to make sure that it is clear and free of any blockages. If you notice any issues, use a dryer vent brush or a plumber’s snake to clear the blockage.

It’s a good idea to clean your dryer vent at least once a year, or more frequently if you notice that your clothes are taking longer to dry or the dryer is overheating. If you’re not comfortable cleaning the dryer vent yourself, you can hire a professional to do it for you.

Blown Thermal Fuse

If you discover the dryer not heating at all, you may have blown the thermal fuse. The thermal fuse is designed to blow if the dryer gets too hot.

This safety feature will help prevent a potential fire, but be aware: the number one cause of blowing this fuse is a clogged dryer vent – so only check and replace the fuse after thoroughly cleaning all the vents!

The Frigidaire dryer thermal fuse location is in the back right corner of the dryer, attached to the heating element housing. Use a multimeter to check if the thermal fuse has continuity. If it is defective, replace it.

The safety design of the thermal fuse is not exclusive to Frigidaire, so ensuring your thermal fuse is working properly is a high priority with any dryer.

Defective Heating Element

The Frigidaire dryer heating element is the part that actually generates heat inside electric dryers. When you have a dryer not heating, the heating element may have failed.

Over time, parts begin to break or fail – it’s just part of the wear-and-tear process of any appliance. If the coils are damaged or no longer work throughout the entire dry cycle, then your dryer won’t maintain enough heat and your clothes won’t dry efficiently.

Inspect the heating element coils to determine if any are broken. If any of the coils are broken or otherwise damaged, they will need to be replaced. If the coils are intact, use a multimeter to check for continuity to ensure they are working properly. If either method indicates the heating element has failed, replace it.

Broken Gas Igniter

The igniter is what ignites the burner assembly in gas dryers. If the ignitor has burned out, the dryer won’t be able to generate heat. This is not terribly uncommon, especially if your dryer has been used for years.

Check the igniter with a multimeter to determine if it is still functioning. If the ignitor has failed, replace it.

Frigidaire Dryer Major Issues

Are you facing major issues with your Frigidaire dryer? Look no further! Welcome to our blog, where we delve into common problems associated with Frigidaire dryers and provide expert solutions to ensure your appliance runs smoothly.

Frigidaire is a renowned brand synonymous with high-quality home appliances. With a rich history of innovation and reliability, Frigidaire has earned its place as a trusted choice for households worldwide. However, even the best appliances can encounter issues over time, and that’s where our expertise comes into play.

In this blog, we will explore prevalent problems that Frigidaire dryer owners may encounter. From issues with heating elements to malfunctioning controls, we cover it all. Understanding these common problems is the first step towards resolving them effectively.

At Appliance Repair Los Angeles, we take pride in our team of skilled technicians who specialize in Frigidaire dryer repairs. Our experts are well-versed in diagnosing and fixing major issues that may disrupt your dryer’s performance. We are committed to providing prompt and reliable solutions, ensuring your Frigidaire dryer operates at its best.

If you’re dealing with major issues with your Frigidaire dryer, don’t hesitate to reach out to Appliance Repair Los Angeles. Call us at 323-792-1970 for expert assistance. Let our skilled technicians diagnose and resolve the problems, ensuring your Frigidaire dryer functions flawlessly.

Frigidaire Dryer Error Code EAF

Frigidaire Dryer Error Code EAF

If your Frigidaire dryer is displaying the EAF error code, it indicates a potential issue with the electronic control board. The electronic control board plays a crucial role in managing various functions of the dryer, and a failure in this component can disrupt normal operation.

Troubleshooting Steps:

Unplug the Dryer: The first step is to disconnect the dryer from the power source. Unplug it from the electrical outlet and wait for at least 5 minutes. This brief pause allows the electronic control board to reset.
Reconnect and Start a Cycle: After the 5-minute waiting period, plug the dryer back in. Initiate a new drying cycle and observe if the EAF error code reappears. In some cases, a temporary glitch may have caused the issue, and the reset could resolve it.
Persistent Code: If the EAF error code persists after the reset, it indicates a more substantial problem with the electronic control board.
Replacement of Electronic Control Board: To address the EAF error code in cases of persistent issues, consider replacing the electronic control board. This component is critical for the proper functioning of the dryer’s various features, and a malfunction could lead to error codes like EAF.

If you find the error code persists despite the reset and you are unsure about replacing the electronic control board, it’s advisable to seek professional assistance. Appliance repair experts have the knowledge and tools to diagnose the specific issue with the control board and can efficiently replace it if necessary.

Don’t hesitate to reach out to appliance repair professionals for a thorough assessment and resolution of the EAF error code. Taking prompt action ensures the continued optimal performance of your dryer.

Frigidaire Dryer Error Code E8C

Encountering Error Code E8C on your dryer signals an issue related to the high-limit thermostat. This component serves as a safety feature, activating if the dryer overheats to prevent potential damage or fire hazards.

If you’re facing this error, here’s a detailed guide to help you resolve the problem:

Blocked Exhaust Vent: The high limit thermostat may trip if there’s a blockage in the exhaust vent, hindering proper airflow.

Troubleshooting Steps:

1. Check the Exhaust Vent:

Inspect the exhaust vent for any obstructions or build-up of lint.
Clear away debris, ensuring a smooth and unrestricted airflow.

2. Address Ventilation Issues:

Verify that the dryer is installed in a well-ventilated area.
Ensure there’s sufficient space around the dryer to allow proper air circulation.

3. Test the High-Limit Thermostat:

If the issue persists, it’s advisable to test the high-limit thermostat for functionality.
Consult your dryer’s manual for instructions on accessing and testing the thermostat.

4. Electronic Control Board Inspection:

If the dryer continues to overheat, it may be due to a malfunctioning relay on the electronic control board.
Consider replacing the electronic control board if the relay is stuck in the “on” position, causing constant heating.

Important Notes:

Safety First: Always disconnect the dryer from the power source before performing any inspections or repairs.
Refer to the Manual: Consult your dryer’s user manual for specific guidance on accessing and testing components.

If, after following these steps, the issue persists, or if you’re unsure about performing the repairs yourself, it’s recommended to seek professional assistance. Qualified technicians can conduct a thorough diagnosis and address the problem effectively.

Remember, timely attention to Error Code E8C can prevent further complications and ensure the continued reliable operation of your dryer. If you have any concerns or questions, don’t hesitate to contact a professional appliance repair service for expert guidance.

Frigidaire Dryer Error Code E68

If your Frigidaire dryer is displaying Error Code E68, it indicates a potential issue with a stuck key on the electronic control board. This error can disrupt the normal operation of your dryer, but fret not – we’re here to guide you through the troubleshooting process.

Understanding Error Code E68:

Error Code E68 signifies that the electronic control board has detected a stuck key. This could be a result of a button on the control panel being pressed and held down for an extended period or a malfunction within the control board itself.

Troubleshooting Steps:

Attempt to Free the Stuck Key:
- Carefully inspect the control panel for any visibly stuck or jammed buttons.
- Gently press each button to ensure they are not physically stuck.
- If you find a stuck key, try to free it by gently manipulating the button.
Power Cycle the Dryer:
- Turn off the dryer and unplug it from the power source.
- Wait for at least 30 seconds to allow the electronics to reset.
- Plug the dryer back in and turn it on to see if the error persists.
Replace the Electronic Control Board:
- If the error persists despite attempting to free the stuck key and power cycling, it may be necessary to replace the electronic control board.
- Consult your dryer’s manual for instructions on replacing the control board or consider seeking professional assistance.

If you find yourself unable to resolve Error Code E68 or if you are uncomfortable with DIY repairs, it’s advisable to seek the expertise of a professional appliance repair service. Experienced technicians can diagnose the issue accurately and recommend the appropriate course of action, whether it involves repairing or replacing the electronic control board.

Understanding and addressing Frigidaire Dryer Error Code E68 is essential to ensure the continued efficiency of your appliance. By following these troubleshooting steps, you can potentially resolve the issue and have your dryer back in working order. If challenges persist, don’t hesitate to enlist the help of professionals for a thorough diagnosis and resolution.

Frigidaire Dryer Error Code E5B

If your Frigidaire dryer displays the error code E5B, it indicates a problem with the heating system, resulting in a lack of heat during the drying process.

This issue can be addressed through a systematic approach:

Power Disconnection:
- Start by unplugging the dryer from the electrical outlet. Safety is paramount during troubleshooting.
Inspect Heating System Components:
- Examine the heating system components of your dryer. This includes the heating element, thermostat, and thermal fuse.
- Look for any visible signs of damage or wear on these components. Replace any faulty parts as needed.
Electric Dryer Check:
- For electric dryers, verify the status of your house circuit breakers. A tripped breaker can disrupt the heating function. Reset any tripped breakers associated with the dryer.
Gas Dryer Inspection:
- If you have a gas dryer, confirm that the gas supply cut-off valve is fully open. Inadequate gas supply can lead to a lack of heat.
- Check for any gas leaks and address them promptly.
Ventilation System:
- Ensure that the dryer’s ventilation system is clear of obstructions. A clogged vent can impact heating efficiency. Clean the vent duct and lint filter to facilitate proper airflow.
Professional Assistance:
- If, after performing these checks, the E5B error persists, it is advisable to seek professional assistance. Certified technicians have the expertise to diagnose and address more complex issues with the heating system.

Remember to prioritize safety throughout the troubleshooting process. If you are uncertain about any step or encounter difficulties, consult with a qualified technician. Addressing the E5B error promptly ensures your dryer operates efficiently, providing optimal performance during each drying cycle.

Frigidaire Dryer Error Code E4A

If you’ve encountered the Frigidaire Dryer Error Code E4A, it signals an extended drying time beyond the normal cycle duration. Typically, this error points to an issue within the heating system. Here’s a detailed guide to help you troubleshoot and resolve this problem:

Possible Cause:

The prolonged drying time suggests a malfunction in the heating element or gas burner components of your Frigidaire dryer.

Troubleshooting Steps:

Unplug the Dryer: Begin by disconnecting the dryer from the power source to ensure safety during inspection and repair.
Inspect the Heating Element:
- For Electric Dryers: Locate the heating element, usually found at the rear of the dryer. Check for any visible damage, like burns or breaks. If you notice any defects, the heating element may need replacement.
- For Gas Dryers: Examine the gas burner components, including the igniter, gas valve coils, and flame sensor. Replace any faulty parts.
Check Ventilation: Poor ventilation can contribute to longer drying times. Ensure that the dryer’s venting system is clear of obstructions and debris. A clean and unrestricted vent promotes efficient drying.
Verify Thermostat Settings: Confirm that the thermostat settings are appropriate for the selected cycle. Incorrect settings may lead to extended drying times.
Inspect the Dryer Drum: Check the drum for any blockages or items that might impede its rotation. A freely moving drum is essential for effective drying.
Reset and Resume: After completing the checks and any necessary replacements, plug the dryer back in. Run a test cycle to see if the issue persists. The error code should clear if the problem has been successfully resolved.

If you encounter challenges during the troubleshooting process or if the issue persists after attempting the suggested steps, it’s advisable to seek professional assistance. Qualified technicians can perform a comprehensive diagnosis and address any underlying problems with precision.

Remember, safety is paramount during any maintenance or repair work. If you’re unsure or uncomfortable with handling certain components, consulting a professional technician is the best course of action.

Frigidaire Dryer Error Code E25

If your dryer is displaying Error Code E25, it indicates a thermistor error. The thermistor, or temperature sensor, plays a crucial role in monitoring and regulating the temperature inside the dryer.

Here’s a step-by-step guide to help you address this issue:

Safety First: Unplug the Dryer Before attempting any troubleshooting or repairs, ensure the safety of the process by unplugging the dryer from the power source.
Locate the Thermistor The thermistor is typically located near the dryer’s heating element or on the blower housing. Refer to your dryer’s manual or technical documentation to identify its exact placement.
Check the Thermistor’s Resistance Using a multimeter set to measure ohms, check the resistance of the thermistor. A functioning thermistor should measure around 50,000 ohms at room temperature.
Interpreting the Reading:
- If the resistance is within the specified range, the thermistor is likely functioning correctly.
- If the resistance is significantly lower or higher than 50,000 ohms, it indicates a faulty thermistor.
Replace the Defective Thermistor: If the thermistor is found to be defective, it’s essential to replace it. Consult your dryer’s manual or seek guidance on the specific model to ensure you acquire the correct replacement part.
Installation of the New Thermistor:
- Carefully remove the old thermistor, taking note of its placement and connections.
- Install the new thermistor securely, ensuring proper connections are made.
- Double-check that all components are back in place before plugging the dryer back in.
Test the Dryer: After replacing the thermistor, plug in the dryer and run a test cycle to ensure the error code is no longer displayed. Monitor the appliance to confirm that it is now operating at the correct temperature.

Remember, if you’re uncertain about any step or encounter difficulties during the process, it’s advisable to seek professional assistance. Troubleshooting and repairing appliances require a certain level of expertise, and safety should always be a top priority. If the issue persists, contacting a qualified technician or service provider is recommended for a thorough diagnosis and resolution.

Frigidaire Dryer Error Code E24

If your dryer displays the error code E24, it indicates a thermistor error. The thermistor, or temperature sensor, plays a crucial role in regulating the temperature inside the dryer.

Here’s a step-by-step guide to help you troubleshoot and resolve this issue:

Safety First:
- Before proceeding with any troubleshooting, unplug the dryer to ensure your safety.
Locate the Thermistor:
- The thermistor is typically located on the blower housing or the exhaust duct inside the dryer. Refer to your dryer’s manual for specific details on its location.
Check the Resistance:
- Use a multimeter to measure the resistance of the thermistor. Set the multimeter to the ohms setting.
- A functioning thermistor should measure around 50,000 ohms at room temperature. If the reading is significantly different, it indicates a potential issue.
Replace a Defective Thermistor:
- If the thermistor’s resistance is not within the expected range, it’s likely defective and needs replacement.
- Obtain a compatible replacement thermistor for your dryer model. You can usually find this part at appliance repair shops or online retailers.
Installation:
- Carefully replace the faulty thermistor with the new one. Follow the manufacturer’s instructions or refer to your dryer’s manual for guidance.
- Ensure all connections are secure and the thermistor is correctly positioned.
Power Up:
- Plug the dryer back in and turn it on to check if the error code E24 persists.
- If the issue persists, there may be a more complex problem, and it’s advisable to seek professional assistance.
Professional Help:
- If you’re unable to resolve the E24 error code or if you’re uncomfortable with the troubleshooting process, consider contacting a professional appliance repair service.
- Professional technicians have the expertise to diagnose and fix complex issues, ensuring the optimal performance of your dryer.

By following these steps, you can address Frigidaire Dryer Error Code E24 related to a thermistor error. Remember to prioritize safety and, when in doubt, seek the assistance of qualified professionals to ensure the proper functioning of your dryer.