Frigidaire Washer Error Code E55

Error Code E55 on your Frigidaire washer indicates a motor overheating issue.

Here’s a detailed guide on how to troubleshoot and address this issue:

1. Unplug the Washer: Safety first! Before proceeding with any troubleshooting, disconnect the washer from the power source to ensure your safety.
2. Remove the Drive Belt: Take off the drive belt connected to the motor. This step is crucial for assessing the motor’s functionality.
3. Check Motor Pulley: Spin the motor pulley manually. If it doesn’t spin freely, this suggests an issue with the drive motor, and it may need to be replaced.
4. Inspect Large Drive Pulley: Rotate the large drive pulley on the back of the washer tub. If the pulley doesn’t spin freely, it indicates a potential problem with the spin bearing.
5. Evaluate Spin Bearing: If the large drive pulley doesn’t spin freely, the outer tub and spin basket may need replacement, as a failed spin bearing is likely the cause.
6. Check Motor Windings Resistance: If the spin bearing is in good condition, proceed to check the resistance of the motor windings. A reading between 4 and 6 ohms is within the normal range.
7. Assess Motor Health: If the motor windings fall within the acceptable range, the motor itself is likely in good condition. If not, consider replacing the motor.
8. Evaluate Speed Control Board: If the motor is sound but the issue persists, the speed control board might be the culprit. In such cases, replacing the speed control board is often the recommended solution.

By following these steps, you can systematically identify and address the root cause of Frigidaire Washer Error Code E55 related to motor overheating. If you encounter any challenges during this process or need further assistance, consider consulting a professional technician for a thorough diagnosis and resolution.