Fisher Paykel Dryer Fault Code LO

Fisher Paykel Dryer Fault Code LO

If your Fisher Paykel dryer displays the fault code LO, it indicates that the ambient temperature in the drying environment is too low for the dryer to operate optimally. This specific error is designed to ensure the proper functioning and efficiency of the appliance. Here’s a detailed explanation of the LO fault code:

LO: Ambient Temperature is Too Low.

Interpretation:

The dryer is equipped with a safety feature that prevents operation in extremely low ambient temperatures.
For the dryer to function correctly, the surrounding environment must have a temperature greater than 2°C (36°F).

Check Ambient Temperature:

Confirm the ambient temperature in the drying area. Ensure it is above 2°C (36°F).

If the temperature is below the specified threshold, consider relocating the dryer to a more suitable environment or adjusting the room temperature.

Provide Adequate Heating:

If the dryer is in a space with insufficient heating, consider using additional heating sources to bring the ambient temperature above the required limit.

Avoid Outdoor Usage in Extreme Cold:

Fisher Paykel dryers are designed for indoor use. Avoid placing the dryer in outdoor locations during extremely cold weather.

By addressing the ambient temperature concern and ensuring it meets the specified requirements, you can resolve the LO fault code and allow your Fisher Paykel dryer to operate effectively. Always refer to the user manual for your specific model for accurate information and guidance related to error codes and troubleshooting.

Fisher Paykel Dryer Fault Code E72

The Fisher Paykel Dryer Fault Code E72 indicates a communication breakdown between the motor and the Printed Circuit Board (PCB). This error can disrupt the normal functioning of the dryer and may require attention to restore optimal performance.

Understanding the Code:

The E72 error signifies a failure in communication between crucial components – the motor and the PCB. In a well-functioning dryer, these components exchange information seamlessly to coordinate various processes, such as controlling the motor speed and ensuring proper operation. When communication is compromised, it triggers the E72 fault code.

Possible Causes:

Faulty Motor:
- The motor itself may be malfunctioning, leading to a breakdown in communication.
- There could be issues with the motor’s sensors or wiring.
PCB Malfunction:
- The Printed Circuit Board, serving as the brain of the dryer, might be experiencing defects.
- Connection issues or damage to the PCB components can disrupt communication.

To address the E72 fault code, consider the following steps:

Inspect Motor Components:
- Check the motor for any visible signs of damage or wear.
- Examine motor wiring and sensors for loose connections or issues.
Examine the PCB:
- Inspect the Printed Circuit Board for signs of damage, burnt areas, or loose connections.
- If possible, reset the PCB according to the user manual instructions.
Professional Assistance:
- If you are unable to identify or resolve the issue through visual inspection, it is advisable to seek professional assistance.
- Trained technicians can conduct thorough diagnostics using specialized tools to pinpoint and rectify the communication error.
Component Replacement:
- If the fault lies with a specific component, such as a malfunctioning motor or a damaged PCB, replacement may be necessary.
- Ensure that replacements are genuine parts compatible with your Fisher Paykel dryer model.

Understanding the nature of the E72 fault code and taking appropriate steps for inspection and resolution can contribute to the effective troubleshooting of your Fisher Paykel dryer. In cases where the issue persists or proves challenging to diagnose, consulting with a qualified technician is recommended for a comprehensive and accurate solution.

Fisher Paykel Dryer Fault Code Err2 or E2

Encountering the ERR2 or E2 fault code on your Fisher Paykel dryer signals a specific issue that requires attention.

Here’s a detailed guide to understanding this error code and effectively troubleshooting it:

ERR2 or E2: This code typically indicates a problem related to water drainage within the dryer system.

Troubleshooting Steps:

Check if the Tank is Full of Water:

The presence of excess water in the tank. Inspect the water tank and ensure it is not overflowing. If full, empty the tank to the recommended level. This action is crucial for proper dryer operation.
Check the Operation of the Drain Pump:

Inadequate water drainage, leading to the ERR2 or E2 code. Examine the drain pump to ensure it is functioning correctly. Listen for any unusual noises or vibrations during the drainage process. If the pump is faulty, it may need repair or replacement.
Check for Lint Around the Float Level Switch:

Buildup of lint around the float level switch. The float level switch is a crucial component that monitors water levels. Check for lint accumulation around the switch, as this can impede its operation. Clean any lint or debris to ensure proper functioning.
Check the Operation of the Switch:

Malfunctioning float level switch. Test the switch for proper operation. If the switch is defective, it may need to be repaired or replaced. Ensure that it moves freely and triggers the necessary responses within the dryer’s control system.

By systematically addressing these troubleshooting steps, you can identify and resolve the ERR2 or E2 fault code on your Fisher Paykel dryer. Regular maintenance, such as clearing lint and ensuring proper drainage, is essential for preventing recurrence of this issue. If troubleshooting does not resolve the problem, seeking professional assistance may be necessary for a thorough diagnosis and repair.

Fisher Paykel Dryer Fault Code Err4 or E4

If your Fisher Paykel dryer displays the error code Err4 or E4, it indicates a potential issue with the heater or sensor components. This fault code arises when the heater or its related circuitry malfunctions, affecting the appliance’s ability to operate effectively.

To address this error and restore your dryer’s functionality, follow these detailed steps:

Heater Inspection:

Malfunctioning heater.

Begin by examining the heater for any visible signs of damage or wear. Look for loose connections or burnt areas. If you notice any issues, it may be necessary to replace the heater component.

Sensor Check:

Faulty sensor.

Inspect the sensor connected to the heater circuitry. Ensure there are no loose wires or damaged connections. In some cases, a malfunctioning sensor may require replacement to resolve the error.

Circuitry Examination:

Malfunction in the related circuitry.

Carefully examine the circuitry associated with the heater. Check for loose wires, damaged connections, or burnt areas on the control board. If any abnormalities are detected, professional assistance may be required for repairs or replacement.

Lint Filter Maintenance:

Error triggered by heater or sensor issues.

Regularly clean and maintain the lint filters. Clogged filters can contribute to heating problems. Clear away any lint or debris to ensure proper airflow and prevent issues with the heater.

Professional Assistance:

Persistent Err4 or E4 code after basic troubleshooting.

If the error persists despite your efforts, it’s advisable to seek professional assistance. A qualified technician can perform a comprehensive diagnosis, identify the specific heater or sensor issue, and implement the necessary repairs or replacements.

By addressing the potential faults with the heater, sensor, and associated circuitry, along with regular lint filter maintenance, you can effectively troubleshoot and resolve the Fisher Paykel dryer fault code Err4 or E4. If uncertainties persist or if the error code remains unresolved, consulting with a professional technician is crucial for a thorough assessment and appropriate corrective measures.

Fisher Paykel Dryer Fault Code Err6 or E6

If your Fisher Paykel dryer is displaying the error code Err6 or E6, it is signaling a specific issue – the lint filters are blocked. This fault code is designed to alert users when the dryer has been started after a user alarm has sounded but hasn’t been addressed and resolved.

Err6 or E6: Lint Filters Blocked

Explanation:

The Err6 or E6 code is triggered as a consequence of the user alarm, indicating that the lint filters in the dryer are obstructed. Lint filters play a crucial role in the drying process by capturing lint and debris, preventing them from accumulating in the dryer and exhaust system. When these filters become blocked, it not only compromises the efficiency of the drying process but can also pose a fire hazard.

To address the Err6 or E6 error code, follow these steps:

Pause the Dryer: Stop the dryer cycle immediately to prevent any further operation until the issue is resolved.
Locate the Lint Filters: The lint filters are typically located near the dryer door or inside the drum. Refer to your dryer’s user manual for specific instructions on finding and accessing the lint filters.
Check for Blockages: Inspect the lint filters for any accumulated lint, debris, or obstructions. Clean the filters thoroughly to ensure they are free from any blockages.
Reset the Dryer: After cleaning the lint filters, reset the dryer. Some models may require you to power off and then power on the appliance, while others may have a specific reset function.
Resume Operation: Once the lint filters are cleaned, you can resume using the dryer. Ensure that the filters are regularly checked and cleaned to prevent the recurrence of the Err6 or E6 error code.

By promptly addressing the lint filter blockage, you not only resolve the specific error code but also contribute to the optimal performance and safety of your Fisher Paykel dryer. Regular maintenance, including keeping lint filters clean, is essential for the longevity and efficiency of your appliance.

Fisher Paykel Dryer Error Code F15

The Fisher Paykel dryer is equipped with an intelligent system that monitors the electrical supply during operation. Error Code F15, termed “Fault Brown Out,” occurs when the product experiences eight brownouts within 60 seconds. In response to this abnormality, the appliance automatically aborts the cycle and displays the fault code. The brownouts signify a significant drop in the supply voltage, specifically when it falls below 180 VAC.

Possible Causes:

Voltage Fluctuations: Sudden drops in the electrical supply voltage, commonly known as brownouts.
Power Supply Issues: Problems with the overall power supply, potentially caused by external factors or electrical issues.

To address Error Code F15 and resume normal operation, follow these steps:

Check the Supply Voltage:
- Use a voltage meter to measure the supply voltage.
- Ensure that the voltage is consistently maintained above 180 VAC during dryer operation.
- If the voltage drops below the specified threshold, investigate and address issues with the power supply.
Address External Factors:
- Investigate external factors that may contribute to voltage fluctuations, such as power grid issues or other appliances drawing excessive power.
- Consider installing voltage stabilizers or surge protectors to regulate the electrical supply.
Professional Assistance:
- If the issue persists or if you are unsure about handling electrical components, seek professional assistance.
- Contact a qualified electrician to inspect and rectify any electrical problems affecting the dryer.

Note: Understanding and resolving the root cause of Error Code F15 is crucial to prevent future interruptions and ensure the optimal performance of your Fisher Paykel dryer. If uncertainties persist or if the problem is beyond your expertise, consulting with a professional technician or electrician is highly recommended.

Fisher Paykel Dryer Error Code F13

If your Fisher Paykel dryer displays the error code F13, it indicates an over-temperature condition. This error occurs when the exhaust air temperature surpasses 90 degrees Celsius, a level not expected during normal dryer operation.

Resolving this issue requires attention to detail and a systematic approach:

Check Lint Filter:

Begin by inspecting the lint filter. A clogged or dirty lint filter can obstruct the airflow, leading to increased temperatures. Clean the lint filter thoroughly, removing any accumulated lint or debris.

Examine Exhaust Duct:

Move on to the exhaust duct, ensuring it is free from blockages or restrictions. Over time, lint or other particles can accumulate in the duct, impeding proper airflow. Check for any obstructions and clear them to allow efficient ventilation.

Verify Ventilation System:

Ensure that the entire ventilation system is functioning correctly. A well-maintained and unobstructed ventilation pathway is essential for heat dissipation. Confirm that the ducts are securely connected and that there are no leaks or damages.

Consider Ambient Temperature:

Assess the ambient temperature in the location where the dryer is situated. Extremely high room temperatures can contribute to the over-temperature condition. Adequate ventilation and proper airflow around the dryer can help mitigate this issue.

Professional Assistance:

If, after performing the above steps, the F13 error persists, it is advisable to seek professional assistance. A certified technician can conduct a thorough inspection of the internal components, heating elements, and sensors to identify and address any underlying issues.

Resolving the Fisher Paykel Dryer F13 error code involves meticulous examination of the lint filter, exhaust duct, and overall ventilation system. Regular maintenance practices, such as cleaning the lint filter and ensuring unobstructed airflow, contribute to the prevention of over-temperature conditions in your dryer.

Fisher Paykel Dryer Error Code F10

When your Fisher Paykel dryer displays the error code F10, it indicates a problem with the exhaust sensor, specifically a short circuit to the cabinet. This issue can disrupt the normal operation of your dryer and needs prompt attention for resolution.

To address the F10 error code, follow these detailed steps:

Unplug the Dryer: Start by unplugging the dryer from the power source to ensure safety during the troubleshooting process.
Locate the Exhaust Sensor: Identify the exhaust sensor within the dryer. This sensor plays a crucial role in monitoring the exhaust temperature during the drying process.
Check Resistance Between Sensor Wires and Cabinet: Using a multimeter, measure the resistance between the sensor wires and the cabinet. There should be no continuity between them under normal conditions.
Inspect for Short Circuit: If the multimeter indicates continuity or a short circuit, inspect the sensor wires and the surrounding area for any visible signs of damage or wear. Look for exposed wires or connections that might be causing the short.
Trace the Short in the Harness: To further identify the source of the short circuit, inspect the wiring harness connected to the exhaust sensor. Trace the wires and look for any pinched, damaged, or compromised sections. Pay attention to areas where the wires may come into contact with the cabinet or other components.
Resolve the Short Circuit: Once the source of the short circuit is identified, address the issue accordingly. This may involve repairing or replacing damaged wires, ensuring proper insulation, and securing the wiring harness to prevent future contact with the cabinet.
Reassemble and Test: After resolving the short circuit, reassemble the dryer components, plug it back in, and run a test cycle to ensure that the F10 error code no longer appears.

By following these troubleshooting steps, you can effectively address the Fisher Paykel dryer error code F10 associated with the exhaust sensor shorted to the cabinet. Always prioritize safety, and if you encounter challenges during the troubleshooting process, seeking professional assistance may be necessary.

Fisher Paykel Dryer Error Code F9

Encountering the Fisher Paykel Dryer Error Code F9 can be indicative of a faulty exhaust sensor, impacting the proper functioning of your appliance. Here is a detailed guide on understanding this error code and steps to resolve it:

Error Code F9: Faulty Exhaust Sensor

The F9 error code on your Fisher Paykel dryer signals an issue with the exhaust sensor. This sensor plays a crucial role in monitoring the airflow and temperature within the dryer. When the sensor malfunctions, it can disrupt the drying process and trigger the F9 error code.

Troubleshooting Steps:

Unplug the Dryer:

Begin by disconnecting the dryer from the power source to ensure safety during troubleshooting.
Locate the Exhaust Sensor:

Identify the location of the exhaust sensor in your dryer. It is typically situated in the exhaust duct.
Check Resistance of the Sensor:

Use a multimeter to measure the resistance of the exhaust sensor. A functioning sensor should display a specific resistance level. Refer to your dryer’s user manual for the correct resistance values.
Replace the Sensor if Faulty:
- If the multimeter indicates a resistance outside the normal range or if the sensor fails to provide any reading, it is likely faulty.
- In such cases, replacement of the exhaust sensor is recommended. Consult your dryer’s user manual or contact the manufacturer for information on obtaining a compatible replacement sensor.

Resolving the F9 error code involves a systematic approach, starting with disconnecting the power, checking the sensor’s resistance, and replacing it if necessary. By following these steps, you can restore the proper functioning of your Fisher Paykel dryer and ensure efficient drying performance.

Fisher Paykel Dryer Error Code F6

Encountering Error Code F6 on your Fisher Paykel dryer indicates a potential issue with either the exhaust or ambient sensor. Here’s a comprehensive guide to help you understand and resolve this error:

Error Code F6 Description:

Error Code F6 signals a problem related to the exhaust or ambient sensor in your Fisher Paykel dryer. These sensors play a crucial role in maintaining optimal drying conditions, and a malfunction can impact the appliance’s performance.

Possible Causes:

Faulty Exhaust Sensor: The exhaust sensor may have an open or shorted circuit, disrupting its ability to communicate with the dryer’s electronic module.
Faulty Ambient Sensor: If the ambient sensor is defective, it can lead to the electronic module’s malfunction.

Troubleshooting Steps:

Examine the Exhaust Sensor:
- Unplug the exhaust sensor from its connection point.
- Check the resistance of the sensor using a multimeter. The ideal resistance at 20 degrees Celsius should be 2000 ohms.
- If the resistance is outside this range, it indicates a faulty exhaust sensor.
- Replace the exhaust sensor with a new one if it’s found to be defective.
Addressing Ambient Sensor Issues:
- If you suspect an issue with the ambient sensor, it’s essential to note that a faulty ambient sensor typically requires replacing the entire electronic module.
- Consult your dryer’s user manual or technical documentation for specific details on the ambient sensor and electronic module replacement.

By following these troubleshooting steps, you can identify and address the specific sensor causing Error Code F6 on your Fisher Paykel dryer. Remember to exercise caution, and if you’re uncertain about the process, consider seeking professional assistance for a more accurate diagnosis and resolution.