Fisher Paykel Washer Error Code 234, 235, 238, or 239

If you’ve encountered Fisher Paykel washer error codes 234, 235, 238, or 239, it’s likely pointing to a problem with the lid lock mechanism. Here’s a detailed guide on understanding and resolving this issue:

Symptoms:

• Error codes 234, 235, 238, or 239 displayed on the washer.
• Lid lock failure, preventing the washer from functioning properly.

Troubleshooting Steps:

1. Unplug and Inspect:

   • Begin by unplugging the washer to ensure safety.
   • Examine the lid lock assembly for any visible loose wires. Reconnect them securely.

2. Wire Harness Check:

   • If the wires appear damaged, replace the wire harness to ensure a reliable connection.

3. Resistance Measurement:

   • Use a volt/ohm meter to measure the resistance of the lid lock.
   • The expected resistance for a functional lid lock is 63 ohms.

4. Replacement of Lid Lock:

   • If the resistance deviates from the standard 63 ohms, replace the lid lock assembly. This component is crucial for ensuring the proper functioning of the lid lock mechanism.

5. Motor Control Module Check:

   • If the resistance is within the expected range and the issue persists, the next step is to inspect the motor control module.
   • Replace the motor control module if necessary, as it plays a key role in coordinating the washer’s various functions.

Resolving Fisher Paykel washer error codes 234, 235, 238, or 239 involves a systematic approach. By checking and reestablishing connections, replacing damaged components, and verifying resistance values, you can effectively address the lid lock issue. Remember, safety first – always unplug the washer before performing any inspections or replacements.

If you encounter challenges during this process or need professional assistance, don’t hesitate to reach out to a qualified appliance repair service for expert guidance.