Fisher Paykel Washer Error Code 10, 41 or 237

If your Fisher Paykel washer is displaying error codes 10, 41, or 237, it indicates a malfunction in the thermistor, the crucial component responsible for monitoring water temperature.

Here’s a step-by-step guide to troubleshoot and resolve this issue:

1. Unplug the Washer:

Begin by disconnecting the washer from the power source to ensure safety during the troubleshooting process.

2. Check for Loose Wires:

Inspect the thermistor circuit for any loose or disconnected wires. Reconnect them securely to eliminate any potential connectivity issues.

3. Examine the Wire Harness:

Inspect the wire harness connected to the thermistor. If you notice any signs of damage such as fraying or wear, it’s crucial to replace the wire harness to maintain proper functionality.

4. Measure Thermistor Resistance:

Use a volt/ohm meter to measure the resistance of the thermistor. This step involves checking the electrical resistance, and it’s a critical diagnostic measure.

5. Ideal Resistance Level:

At a temperature of 68 degrees Fahrenheit, the thermistor resistance should read approximately 12.5K ohms. If the measured resistance deviates from this value, it indicates a potential issue with the thermistor.

6. Thermistor Replacement:

If the measured resistance does not align with the specified 12.5K ohms at 68 degrees F, it’s advisable to replace the thermistor. This ensures accurate temperature monitoring and resolves the error code associated with thermistor failure.

Addressing the Fisher Paykel washer error codes 10, 41, or 237 promptly and systematically can help restore your appliance to optimal performance. Remember to follow these steps carefully and, if needed, seek assistance from a professional technician for a thorough diagnosis and resolution.