Fisher Paykel Refrigerator Cooling Issues

Despite the integrated design and complementary tonal contrast of the Fisher and Paykel Fridge, it is not immune to the cooling problems that plague most refrigerators. But then, if your Fisher and Paykel fridge is not cooling or beeping, we are here for you. This article will be a guide for you to get your fridge back in good working condition.

1. Wrong Temperature Setting

One of the primary reasons most fridges stop cooling is that they are not set at the right temperature. Try adjusting the temperature level of your Fisher and Paykel fridge and observe it for 24 hours. You must follow the instructions in the user manual to adjust the temperature, especially if the fridge uses a digital temperature control.

But if it uses a temperature control knob, keep it at mid-setting; 4 or 5 should be the best point. If the fridge gets cooler, the temperature control is the problem. However, try the next solution if the fridge does not get cooler.

2. Excessive Food Items

If your fridge is stocked with food items, they may block the air outlet that helps the fridge get cool. So, locate the air outlet and remove any food items that may be in its way. Once you do that, air can flow into the different compartments and parts of your fridge.

Also, filling the fridge with warm, hot, or room-temperature foods and drinks at the same time can cause it to take longer to cool. This is especially true if the fridge is a new installation. If that is the case, you must reduce the items in the fridge and keep the door closed as much as possible. Frequently opening the door will cause it to stop cooling.

3. Worn Out Door Seals

If you have been using your Fisher and Paykel fridge for more than five years, chances are high that the edges of the door will be experiencing wear and tear, especially if you have poor maintenance culture.

Without the door seals, it will be like you are using your car’s air conditioner while your windows are open. So, if you notice any wear and tear on the door seals of your fridge, consider going for a replacement.

4. Frosted Evaporator Coils

Over time, the evaporator coils of your fridge will get frosted over, making cooling difficult or even impossible. So, you need to run a defrost cycle.

Start by turning OFF the fridge from the power source. Next, spread a piece of towel or foam over the portion of the floor where the ice will melt. The defrost cycle takes about 2 hours, so be patient.

Once you complete the defrost cycle, turn ON your fridge and you will notice it is getting cooler with time.

However, the fridge’s evaporator coils will only frost over if there is no automatic defrost system. If there is one and frost covers the coils, there is a problem with the system, and you must troubleshoot each one to determine the faulty one. Then, you can replace it.

5. Defective Compressor

Another reason your Fisher and Paykel fridge is not cooling is probably because of its defective compressor. The compressor is basically the engine of your fridge. So, it’s needless to say what happens to the fridge if the compressor is faulty.

If you do not hear any humming sound from the compressor, it means that it is defective. So, consider getting a replacement. Before replacing the compressor, have a technician test it to see if there is a fault. The problem may stem from inadequate voltage supply or some other external issue.

Fisher and Paykel Fridge Beeping and Not Cooling – How To Solve It

The Fisher and Paykel fridge, like most fridges, are designed to work silently. So, when your fridge starts beeping and not cooling, know that there is an issue. Here is how you can troubleshoot your fridge to resolve the issue:

1. Position Your Fridge Well

If your fridge is not well balanced, it won’t function properly. The Fisher and Paykel fridge is designed such that it makes a beeping sound when it is tilted.

Apart from deliberately tilting your fridge, placing it on an uneven floor can trigger its beeping alarm. So, ascertain that the fridge is evenly balanced using a level.

You will know if the fridge is balanced by looking at the liquid vial of the level. If it is not centered, then adjust the leg of the fridge until it is balanced. To adjust the legs of the fridge, simply turn them in a clockwise and an anticlockwise direction until you get the best position.

2. Examine the Door Seals

The Fisher and Paykel fridge is built in such a way that it beeps if its refrigerant is leaking through the seals. This will make the fridge not get cool, even if the fridge runs for hours.

In light of this, ensure that the door seals of your fridge are not peeling or cracked. If they are, your fridge will continue to beep, even the doors seem to be closed. Also, ensure that the fridge is not packed full of food items that prevent the door from closing properly.

If your fridge is not overstocked and the door seals are good, then something else is causing the beep.

3. Rearrange the Fridge Items

If leveling the fridge and fixing the door seal do not solve the problem, it may be because you overloaded the fridge. As a result, items stick out or push the shelves out of place and keep the door open. And if the door is open, eve though it appears shut, the door alarm will beep and the fridge will not cool.

Therefore, rearrange the items in the fridge, ensuring that everything fits in place. Push the shelves and bins back into place and close the door. You may have to reduce the fridge items to accommodate the shelves and enable you to close the door.

4. Replace the Mainboard If It is Defective

The last reason your Fisher and Paykel fridge is not cooling and beeping is if there its mainboard has been short-circuited. If that is the case, you need to replace the mainboard.

ut then, the mainboard is not something you want to handle on your own. We recommend that you seek professional advice before getting a replacement, so you do not waste your money, energy, and time.

The mainboard is located at the back of the Fisher and Paykel fridge if you just want to see it for yourself. You don’t want to spend money on a new fridge when the mainboard is the source of your beeping and cooling problems.