Fisher Paykel Dryer Fault Code Err6 or E6

If your Fisher Paykel dryer is displaying the error code Err6 or E6, it is signaling a specific issue – the lint filters are blocked. This fault code is designed to alert users when the dryer has been started after a user alarm has sounded but hasn’t been addressed and resolved.

Err6 or E6: Lint Filters Blocked

Explanation:

The Err6 or E6 code is triggered as a consequence of the user alarm, indicating that the lint filters in the dryer are obstructed. Lint filters play a crucial role in the drying process by capturing lint and debris, preventing them from accumulating in the dryer and exhaust system. When these filters become blocked, it not only compromises the efficiency of the drying process but can also pose a fire hazard.

To address the Err6 or E6 error code, follow these steps:

1. Pause the Dryer: Stop the dryer cycle immediately to prevent any further operation until the issue is resolved.
2. Locate the Lint Filters: The lint filters are typically located near the dryer door or inside the drum. Refer to your dryer’s user manual for specific instructions on finding and accessing the lint filters.
3. Check for Blockages: Inspect the lint filters for any accumulated lint, debris, or obstructions. Clean the filters thoroughly to ensure they are free from any blockages.
4. Reset the Dryer: After cleaning the lint filters, reset the dryer. Some models may require you to power off and then power on the appliance, while others may have a specific reset function.
5. Resume Operation: Once the lint filters are cleaned, you can resume using the dryer. Ensure that the filters are regularly checked and cleaned to prevent the recurrence of the Err6 or E6 error code.

By promptly addressing the lint filter blockage, you not only resolve the specific error code but also contribute to the optimal performance and safety of your Fisher Paykel dryer. Regular maintenance, including keeping lint filters clean, is essential for the longevity and efficiency of your appliance.