Fisher Paykel Dryer Error Code F6

Encountering Error Code F6 on your Fisher Paykel dryer indicates a potential issue with either the exhaust or ambient sensor. Here’s a comprehensive guide to help you understand and resolve this error:

Error Code F6 Description:

Error Code F6 signals a problem related to the exhaust or ambient sensor in your Fisher Paykel dryer. These sensors play a crucial role in maintaining optimal drying conditions, and a malfunction can impact the appliance’s performance.

Possible Causes:

1. Faulty Exhaust Sensor: The exhaust sensor may have an open or shorted circuit, disrupting its ability to communicate with the dryer’s electronic module.
2. Faulty Ambient Sensor: If the ambient sensor is defective, it can lead to the electronic module’s malfunction.

Troubleshooting Steps:

1. Examine the Exhaust Sensor:

   • Unplug the exhaust sensor from its connection point.
   • Check the resistance of the sensor using a multimeter. The ideal resistance at 20 degrees Celsius should be 2000 ohms.
   • If the resistance is outside this range, it indicates a faulty exhaust sensor.
   • Replace the exhaust sensor with a new one if it’s found to be defective.

2. Addressing Ambient Sensor Issues:

   • If you suspect an issue with the ambient sensor, it’s essential to note that a faulty ambient sensor typically requires replacing the entire electronic module.
   • Consult your dryer’s user manual or technical documentation for specific details on the ambient sensor and electronic module replacement.

By following these troubleshooting steps, you can identify and address the specific sensor causing Error Code F6 on your Fisher Paykel dryer. Remember to exercise caution, and if you’re uncertain about the process, consider seeking professional assistance for a more accurate diagnosis and resolution.