Electrolux Washer Error Codes
Are you experiencing issues with your Electrolux washer, puzzled by perplexing error codes? Look no further! Welcome to our blog, where we delve into the world of Electrolux washer error codes, providing insightful solutions and expert guidance to ensure your laundry routine stays uninterrupted.
Electrolux, a renowned brand synonymous with innovation and reliability, has been a stalwart in the home appliance industry for decades. Known for their cutting-edge technology and commitment to quality, Electrolux washers are a popular choice for households worldwide.
In this blog, we aim to demystify the common error codes that may disrupt your Electrolux washing machine’s smooth operation. Whether it’s error code E11, E13, or any other perplexing alphanumeric combination, we’ve got you covered. Our comprehensive guide will help you understand the root cause of the problem and provide step-by-step solutions to get your washer back on track.
| Error Code | Description |
|---|---|
| E10 | Water inlet fault Learn More |
| E11 | Your washer isn’t filling with water during the washing phase of the cycle Learn More |
| E12 | This error code means your washer isn’t filling with water during the rinsing phase of the cycle Learn More |
| E13 | Water level is dropping when it shouldn’t, so there is likely a leak Learn More |
| E20 | Your washing machine has a drain fault Learn More |
| E21 | This error code is another drain fault code Learn More |
| E22 | Your washer isn’t draining after the rinse cycle Learn More |
| E23 | Your Electrolux washing machine has detected an issue between the drain pump triac sensing and the triac status Learn More |
| E24 | This error code indicates a fault in the sensing circuit of the drain pump triac Learn More |
| E25 | Wrong input signal is being sent to the microprocessor in your washer Learn More |
| E31 | This code means the pressure switch is faulty Learn More |
| E32 | Pressure switch has a calibration problem Learn More |
| E35 | Pressure sensor in your washer has detected the water level is too high Learn More |
| E40, E41, E42, E43, E44, and E45 | These error codes indicate a problem with the door lock Learn More |
| E50 | Problem with the motor in your washing machine Learn More |
| E60 | This error code indicates a heating fault Learn More |
| E61 | It indicates a problem with the water not heating during the wash cycle Learn More |
| E62 | Water is overheating during the wash cycle Learn More |
| EC1 | PCB is receiving a signal from the flow meter telling it that water is flowing into the washing machine incorrectly Learn More |
| EF1 | This error code indicates the drain pump filter or one of the hoses is blocked Learn More |
| EF2 | There is too much foam in the washer drum during the spin cycle Learn More |
| EF4 | This error code indicates the flow meter is not detecting any water flowing into your washer even though the water inlet valves are open Learn More |
| EF5 | Washing machine is out of balance Learn More |
Our experts are well-versed in deciphering error codes, swiftly identifying the underlying problems, and implementing effective solutions. With years of hands-on experience, our technicians are your go-to source for reliable and efficient appliance repairs.
For personalized assistance and swift resolution of Electrolux washer error codes, reach out to our experts at Appliance Repair Los Angeles. Dial 323-792-1970 to connect with our customer service team. We’re here to ensure your Electrolux washer operates at its best, restoring convenience to your laundry routine.
Schedule Appointment