Electrolux Washer Error Code E20

Encountering the dreaded E20 error code on your Electrolux washer? Fret not; we’ve got the lowdown on this drain fault hiccup and some DIY solutions to get your washing machine back in action.

The E20 error code signals a drainage issue within your Electrolux washing machine. This hiccup typically occurs when the appliance faces difficulties draining water during the wash or spin cycle. Fear not, as we guide you through the steps to troubleshoot and resolve this bothersome error.

DIY Solutions to Tackle E20:

1. Inspect Drain Hoses:

   • Begin your diagnostic journey by examining the drain hoses connected to your Electrolux washer. Ensure they are free from kinks, twists, or any visible damage.
   • Detach the hoses and give them a thorough inspection. Any blockages or debris can impede proper drainage, leading to the E20 error.

2. Check the Filter:

   • Navigate to the filter, typically located at the bottom front of your washer. Unscrew the filter cap and carefully inspect for any trapped lint, coins, or foreign objects.
   • Clear away any debris you find, as a clogged filter often contributes to drainage issues triggering the E20 error.

3. Examine the Drain Pump:

   • If the hoses and filter are in the clear, the culprit might be a malfunctioning drain pump. Access the pump, usually located behind a panel at the front or rear of the machine.
   • Check for any visible signs of damage or obstruction. If the pump appears faulty or is making unusual noises, a replacement may be necessary.

While these DIY solutions can often rectify the E20 error, some cases may require the expertise of a professional technician. If you’ve diligently followed the steps above and the problem persists, it might be time to contact our team at Appliance Repair Los Angeles.