Electrolux Washer Error Code E12

When your washer displays the E12 error code, it signals a hiccup in the rinsing phase. In simpler terms, your appliance is encountering difficulty filling with water during this crucial stage of the cycle.

1. Check the Water Supply: First and foremost, ensure that the water tap connected to your washer is turned on. It might seem basic, but sometimes the simplest solutions escape our notice.
2. Inspect Hoses for Kinks: Examine the hoses connected to your Electrolux washer. Kinks and twists in the hoses can obstruct water flow, triggering the E12 error. Straighten out any kinks to ensure a smooth water supply.
3. Clearing Blockages: Over time, debris and sediment can accumulate in the hose filters or the water inlet valve, impeding water flow. Take a moment to inspect and clean these components, eliminating potential blockages.
4. Consider a Water Inlet Valve Replacement: If the issue persists after checking the basics, the culprit may be a faulty water inlet valve. This component controls the water flow into the washer and might need replacement to resolve the E12 error.

Step-by-Step Troubleshooting:

• Turn off your washer and unplug it for safety.
• Inspect the water tap, ensuring it’s fully open.
• Follow the hoses from the tap to the washer, checking for kinks or twists.
• Examine the hose filters and the water inlet valve for blockages.
• Clean or replace components as needed.
• Plug in and restart your washer to see if the E12 error persists.

By following these DIY solutions, you can potentially troubleshoot and resolve the E12 error on your Electrolux washer, restoring it to optimal functionality. If issues persist, or if you’re unsure about conducting these steps, our expert team at Appliance Repair Los Angeles