DCS Refrigerator Error Code IF

The IF error code will display on the refrigerator’s control panel. You may also notice that the ice maker is not producing any more ice.

Possible Causes of the IF Error Code

The most likely cause of the IF error code is that the ice bin is simply full. This is a common occurrence, especially if you use the ice maker frequently.

Other possible causes of the IF error code include:

• A faulty ice maker
• A faulty ice bin sensor
• A problem with the refrigerator’s control board

Troubleshooting the IF Error Code

If you see the IF error code on your DCS refrigerator, you can try the following troubleshooting steps:

1. Check the ice bin. Make sure that the ice bin is not full. If it is full, empty it and reset the refrigerator.
2. Check the ice maker. If the ice maker appears to be working properly, check the ice bin sensor. The sensor may be faulty, which could be causing the error code.
3. Check the refrigerator’s control board. If the ice maker and ice bin sensor appear to be working properly, the problem may be with the refrigerator’s control board.

Resetting the Refrigerator

To reset the refrigerator, follow these steps:

1. Unplug the refrigerator.
2. Wait for 30 seconds.
3. Plug the refrigerator back in.

Replacing the Ice Maker or Ice Bin Sensor

If you determine that the ice maker or ice bin sensor is faulty, you will need to replace it. You can purchase replacement parts from a DCS authorized dealer.

Replacing the Refrigerator’s Control Board

If you determine that the refrigerator’s control board is faulty, you will need to have it repaired or replaced by a qualified appliance repair technician.

The IF error code is a relatively common problem that can be easily resolved. By following the troubleshooting steps above, you can often fix the problem yourself.