Call (323) 792-1970
Customer service:    323-792-1970
  • DCS
  • DCS Refrigerator Error Code CL
Schedule Appointment
DCS Refrigerator Error Codes

DCS Refrigerator Error Code CL

The CL error code on a DCS refrigerator indicates that the temperature in the evaporator is too low. The evaporator is the part of the refrigerator that cools the air. If the temperature in the evaporator is too low, it can cause ice buildup or freezer burn.

Symptoms of the CL Error Code

There are a few symptoms that can indicate the CL error code. These include:

  • Ice buildup on the evaporator coils
  • Freezer burn on food
  • The refrigerator may not be cooling properly

Possible Causes of the CL Error Code

There are a few possible causes of the CL error code. These include:

  • A faulty thermostat
  • A faulty evaporator fan
  • A faulty defrost timer
  • A faulty compressor

If you see the CL error code on your DCS refrigerator, you can try the following troubleshooting steps:

  1. Check the thermostat

The thermostat is the component that controls the temperature in the refrigerator. If the thermostat is faulty, it may be sending the wrong signal to the evaporator fan. To check the thermostat, you can use a multimeter to measure its resistance. If the resistance is outside of the specified range, the thermostat may need to be replaced.

  1. Check the evaporator fan

The evaporator fan is the component that circulates the air in the evaporator. If the evaporator fan is faulty, it may not be circulating the air properly, which can lead to ice buildup. To check the evaporator fan, you can listen for it running. If you do not hear the fan running, it may need to be replaced.

  1. Check the defrost timer

The defrost timer is the component that controls the defrost cycle. If the defrost timer is faulty, it may not be turning on the defrost heater properly, which can lead to ice buildup. To check the defrost timer, you can use a multimeter to measure its resistance. If the resistance is outside of the specified range, the defrost timer may need to be replaced.

  1. Check the compressor

The compressor is the component that pumps the refrigerant through the refrigerator. If the compressor is faulty, it may not be cooling the evaporator properly. To check the compressor, you can use a multimeter to measure its voltage. If the voltage is outside of the specified range, the compressor may need to be replaced.

Replacing the Faulty Component

If you have checked all of the other possible causes and the CL error code is still present, the faulty component may be the compressor. If the compressor needs to be replaced, you will need to contact a qualified appliance repair technician.

Additional Information

Here are some additional things to keep in mind about the CL error code:

  • The CL error code can be a serious problem if it is not addressed. Ice buildup can cause the refrigerator to malfunction, and freezer burn can damage food.
  • If you are not comfortable troubleshooting the CL error code yourself, it is best to contact a qualified appliance repair technician.

By understanding the symptoms, causes, and troubleshooting steps for the CL error code, you can help to keep your DCS refrigerator running properly.

Schedule Appointment