Dacor Refrigerator Error Code F18

The Dacor refrigerator error code F18 indicates that the door switch has failed. The door switch is a safety device that prevents the refrigerator from operating if the door is open. When the door is closed, the door switch closes and completes an electrical circuit. This circuit tells the refrigerator that the door is closed and that it can operate normally.

If the door switch fails, the refrigerator will not operate and the error code F18 will be displayed.

If you see the error code F18, you can try to troubleshoot the problem yourself. Here are some steps you can take:

1. Check the door seal. Make sure that the door seal is properly aligned and that it is sealing tightly around the door.
2. Check the door switch. Use a multimeter to test the door switch for continuity. If the door switch does not have continuity, it will need to be replaced.

Replacement Instructions

To replace the door switch, you will need to follow the instructions in your refrigerator’s owner’s manual. Here are some general steps you can follow:

1. Unplug the refrigerator from the power outlet.
2. Remove the screws that secure the door switch to the refrigerator.
3. Remove the old door switch.
4. Install the new door switch.
5. Secure the new door switch with screws.
6. Plug the refrigerator back into the power outlet.

Additional Troubleshooting Tips

• If you have replaced the door switch and the error code F18 is still displayed, there may be another underlying problem with the refrigerator. In this case, you should contact a qualified appliance repair technician for further diagnosis and repair.
• If you are not sure how to troubleshoot or repair the door switch, you should contact a qualified appliance repair technician.