Dacor Refrigerator Error Code E8

If you see error code E8 on your Dacor refrigerator, it means that the compressor control board has failed. The compressor control board is responsible for controlling the operation of the compressor, which is the main component that cools your refrigerator.

To troubleshoot this error code, you can try the following steps:

1. Check the power supply to the refrigerator. Make sure that the power cord is plugged in and that the outlet is working properly.
2. Check the connections between the compressor control board and the compressor. Make sure that the connections are secure and free of corrosion.
3. Replace the compressor control board. If you have checked the power supply and the connections and the error code is still present, then the compressor control board is likely faulty. You can purchase a replacement compressor control board from a Dacor authorized dealer or online retailer.

If you are comfortable working with electrical components, you can replace the compressor control board yourself. To do this, you will need to:

1. Disconnect the power to the refrigerator.
2. Remove the screws that hold the compressor control board in place.
3. Disconnect the wiring from the compressor control board.
4. Install the new compressor control board.
5. Reconnect the wiring to the new compressor control board.
6. Reconnect the power to the refrigerator.

If you are not comfortable working with electrical components, or if you are unable to troubleshoot the error code yourself, you should contact a qualified appliance repair technician. A technician will be able to diagnose the problem and repair the refrigerator properly.

The compressor control board is a relatively expensive component, so it is important to troubleshoot the error code carefully before replacing the board. If you are able to identify and repair the underlying cause of the error code, you may be able to avoid having to replace the board.