Dacor Refrigerator Error Code E5

The Dacor refrigerator error code E5 indicates that the defrost heater has failed. The defrost heater is responsible for melting the frost that builds up on the evaporator coils during the defrost cycle. If the defrost heater fails, the frost will not melt and the evaporator coils will eventually freeze up. This can lead to a number of problems, including:

• Increased energy consumption
• Reduced cooling performance
• Food spoilage

If you are seeing the error code E5, you can try to troubleshoot the problem yourself by following these steps:

1. Check the power supply to the defrost heater. Make sure that the power cord is properly plugged in and that the breaker is not tripped.
2. Check the connections to the defrost heater. Make sure that the wiring is secure and that there are no loose or damaged connections.
3. Test the defrost heater. You can use a multimeter to test the resistance of the defrost heater. If the resistance is zero or infinite, the defrost heater is faulty and needs to be replaced.

If you have confirmed that the defrost heater is faulty, you can replace it yourself:

1. Unplug the refrigerator from the power outlet.
2. Remove the back panel of the refrigerator.
3. Locate the defrost heater. It is usually located behind the evaporator coils.
4. Disconnect the wiring from the defrost heater.
5. Remove the old defrost heater.
6. Install the new defrost heater. Make sure that the wiring is properly connected.
7. Replace the back panel of the refrigerator.
8. Plug the refrigerator back into the power outlet.

Additional Information

The defrost heater is a relatively inexpensive and easy-to-replace part. If you are seeing the error code E5, it is a good idea to replace the defrost heater as soon as possible to prevent further damage to your refrigerator.