Dacor Dishwasher Error Code: “Three long beeps and red light flashes below the door”

If your Dacor dishwasher is sounding three long beeps accompanied by a red light flashing below the door, it indicates a drainage problem. Resolving this issue is crucial to ensure the proper functioning of your dishwasher.

Here’s a detailed guide on troubleshooting and fixing the problem:

1. Press Cancel Twice to Reset:

   Begin by pressing the “Cancel” button twice. This is the initial attempt to reset the dishwasher and clear any temporary glitches.

2. Check Sink Drain for Clogs:

   If the error code persists, the next step is to inspect and clear any clogs from the sink drain. A clogged sink drain can hinder the dishwasher’s ability to drain properly.

3. Unplug the Dishwasher:

   To safely address the issue, unplug the dishwasher from the power source. This ensures safety during the inspection and repair process.

4. Inspect Dishwasher Drain Hose:

   Examine the dishwasher drain hose for any obstructions or kinks. Clear any debris that may be causing a blockage. Ensure that the hose is properly connected and free from damage.

5. Check Drain Pump:

   Inspect the drain pump for clogs or damage. The drain pump plays a crucial role in expelling water from the dishwasher. Clear any debris and ensure the pump is in good working condition.

6. Replace Damaged Components:

   If the drain hose or drain pump is found to be damaged beyond repair, it’s advisable to replace the faulty components. Damaged parts can impede the draining process and lead to recurring errors.

Important Note: When working with electrical appliances, prioritize safety. Always unplug the dishwasher before conducting any inspections or repairs.

Following these troubleshooting steps should address the “Three Long Beeps and Red Light Flashes Below the Door” error code on your Dacor dishwasher. If the issue persists or if you are unsure about any aspect of the repair process, it is recommended to seek professional assistance.