Call (323) 792-1970
Customer service:    323-792-1970
  • Dacor
  • Dacor Dishwasher Cycle stops followed by 3 long beeps and drain pump runs, Floor Guard LED turns on, red light below the door stays on
Schedule Appointment
Dacor Dishwasher Error Codes

Dacor Dishwasher Cycle stops followed by 3 long beeps and drain pump runs, Floor Guard LED turns on, red light below the door stays on

The Dacor dishwasher is equipped with a diagnostic feature that signals specific issues through error codes, and in this scenario, the error code indicates a water leak. When your dishwasher cycle stops abruptly, and you hear three long beeps while the drain pump runs, accompanied by the Floor Guard LED turning on and a red light below the door staying illuminated, it’s a clear indication of a water leak.

Error Code Interpretation:

  • Symptoms:

    • Cycle stops unexpectedly.
    • Three long beeps.
    • Drain pump runs continuously.
    • Floor Guard LED is activated.
    • Red light below the door remains on.

  • Error Code: Water Leak

Steps to Diagnose and Resolve the Issue:

  1. Safety First:

    Unplug the dishwasher or turn off the house circuit breaker to ensure safety during the inspection and repair process.

  2. Access the Lower Components:

    Remove the lower access panel of the dishwasher to gain access to the components located at the bottom.

  3. Examine for Leaks:

    Thoroughly inspect the components in the lower section of the dishwasher to identify the source of the leak. Common areas prone to leaks include hoses, valves, or the dishwasher’s base.

  4. Replace Leaking Components:

    Identify and replace any components found to be leaking. This may involve replacing damaged hoses, valves, or other faulty parts contributing to the water leak.

  5. Remove Water from Base Pan:

    After addressing the leaking components, it’s crucial to remove any accumulated water from the base pan of the dishwasher. Excess water in the base pan can trigger the Floor Guard LED and cause the red light below the door to stay on.

  6. Restore Power:

    Once the repair is complete and the base pan is free of water, restore power to the dishwasher either by plugging it back in or turning on the circuit breaker.

Conclusion: Addressing the Dacor dishwasher error code related to a water leak involves a systematic approach to identify and replace the leaking components. By following these steps, you can resolve the issue, ensuring your dishwasher functions optimally without interruptions caused by water leaks. If you encounter challenges during this process or if the issue persists, it’s advisable to seek assistance from qualified technicians, such as those at Appliance Repair Los Angeles

Schedule Appointment