Bosch Dishwasher Error code E06

Bosch Dishwasher Error code E06

Bosch dishwashers are renowned for their efficiency and performance, but occasionally, even these high-quality appliances can encounter issues. One common problem that Bosch dishwasher owners may face is Error Code E06. In this comprehensive guide, we’ll explore the possible causes and solutions for Bosch Dishwasher Error Code E06 to help you get your dishwasher back in top working condition.

Understanding Bosch Dishwasher Error Code E06

Error Code E06 typically indicates two primary issues:

1. Door Mechanism Failure: Depending on your Bosch dishwasher model, this error code may suggest that the dishwasher door is not closing or locking properly.
2. Aqua Sensor Fault: In some cases, Error Code E06 can also be related to a fault in the aqua sensor, sometimes referred to as the turbidity sensor. The aqua sensor plays a crucial role in monitoring the quality of the water, ensuring it’s clean and not dirty.

Troubleshooting the Issues

Here’s a detailed breakdown of how to troubleshoot these problems:

1. Door Mechanism Failure:

• Check Door Closure: Ensure that the dishwasher door is closing and locking correctly. If you notice any issues with the door’s closing mechanism, it may need to be adjusted or repaired.
• Inspect Door Switch: The sensor switch that monitors the door’s status may be faulty. Check the door switch for any visible damage or signs of wear. If the switch is damaged, it will need to be replaced.
• Main Control Board: If the door is closing and locking correctly, but the error code persists, it may be due to a fault in the main control board. Diagnosing and fixing control board issues often require the expertise of a Bosch technician.

2. Aqua Sensor Fault:

• Locate the Aqua Sensor: The aqua sensor is responsible for monitoring the water quality within the dishwasher. It’s typically located on the circulation pump. To access and inspect the aqua sensor, you’ll need to dismantle the dishwasher. Be sure to disconnect the power supply before attempting any disassembly.
• Clean the Sensor: Sometimes, the sensor can become dirty or obstructed, leading to inaccuracies in water quality measurement. Carefully clean the sensor, ensuring there is no residue or debris affecting its performance.
• Replace the Sensor: If cleaning the sensor doesn’t resolve the issue, the aqua sensor may be faulty and need to be replaced. Replacement parts can be obtained from authorized Bosch service centers.

Bosch Dishwasher Error code E05

Bosch Dishwasher Error code E05

The E05 error code on your Bosch dishwasher is an indication of a problem related to the water switch Triac on the main control board. In some instances, it may also signal issues with the float or the float switch. Let’s break down these potential causes:

1. Water Switch Triac Fault:

The most likely reason for the E05 error is a malfunction in the water switch Triac on the main control board. This component is responsible for regulating the water filling and draining processes. When it malfunctions, it can disrupt the dishwasher’s operation, leading to the error code.

2. Float or Float Switch Issue:

Another possible cause of the E05 error is a damaged float or a defective float switch. The float is a small device located at the base of the dishwasher, and it rises with the water level during a cycle. The float switch is responsible for signaling when the appropriate water level is reached. If either of these components is not functioning correctly, it can trigger the error code.

Troubleshooting the E05 Error Code:

Before scheduling a service call with a Bosch technician, there are some steps you can take to troubleshoot and potentially resolve the E05 error:

1. Inspect the Float and Float Switch:

Start by checking the float and float switch. Ensure they are clean and free from any debris or blockages that might hinder their movement.

2. Reset the Dishwasher:

Sometimes, a simple reset can clear error codes. Turn off the dishwasher’s power for a few minutes and then turn it back on.

3. Check for Leaks:

Inspect the area around your dishwasher for any signs of water leakage. Leaks can trigger the E05 error, so fixing any leaks could resolve the issue.

4. Contact a Technician:

If the error persists after these troubleshooting steps or if you’re unsure about diagnosing and fixing the problem yourself, it’s advisable to contact a Bosch technician. They have the expertise and tools to diagnose and repair the water switch Triac or replace any faulty components.

In summary, the Bosch Dishwasher Error Code E05 can be attributed to a water switch Triac fault on the main control board or issues with the float and float switch. By understanding the potential causes and taking appropriate troubleshooting steps, you can address the problem effectively. If the error lingers, don’t hesitate to reach out to a Bosch technician for professional assistance. A functioning dishwasher is essential for a smooth-running kitchen, and resolving error codes promptly ensures your dishwasher operates at its best.

Bosch Dishwasher Error code E04

Bosch Dishwasher Error code E04

When it comes to Bosch dishwashers, their reputation for excellence is well-deserved. However, even the most reliable appliances can experience issues from time to time. One such issue is the E04 error code, which typically points to a heating problem or water-related issue within the dishwasher. In this blog post, we will delve deeper into the Bosch dishwasher error code E04, helping you understand what it means and providing insights into potential solutions.

Understanding the Bosch Dishwasher Error Code E04

The E04 error code on your Bosch dishwasher’s display can be quite perplexing, as it doesn’t pinpoint a specific problem but rather indicates a heating fault or a water-related issue. Here’s what you need to know:

1. Heating Issue:

The E04 error code often suggests a problem with the dishwasher’s heating element. This component is responsible for maintaining the water temperature at the right level throughout the wash cycle. A malfunctioning heating element can lead to inefficient cleaning and sanitizing of your dishes.

2. Water Flow Sensor:

In some cases, the E04 code may also signal a problem with the water flow sensor. This sensor ensures that the right amount of water is entering the dishwasher, and it’s a crucial part of the cleaning process. A faulty sensor can disrupt the dishwasher’s performance.

3. Spray Arm Clog:

With certain Bosch dishwasher models, an E04 error may indicate that the spray arm is clogged. A clogged spray arm can restrict water circulation and lead to poor cleaning results.

What to Do When You Encounter E04:

If your Bosch dishwasher displays the E04 error code, here are some steps you can take:

1. Restart the Dishwasher:

Sometimes, a temporary glitch can trigger error codes. Try resetting the dishwasher by turning it off, waiting a few minutes, and then turning it back on.

2. Check for Spray Arm Clogs:

If your dishwasher has a clogged spray arm, you can remove it and clean out any debris or blockages. This simple fix can sometimes resolve the issue.

Remember, the E04 error code is a general indicator of an issue but not a specific diagnosis. While you can attempt basic troubleshooting, for more complex problems, it’s always advisable to seek the expertise of a professional technician who is familiar with Bosch dishwasher systems.

Bosch Dishwasher Error code E03

Bosch Dishwasher Error code E03

An E03 error code typically signifies a problem related to the auxiliary heater relay on the main control board. This component plays a crucial role in controlling the heating element, which helps maintain the water temperature for effective dishwashing. If the auxiliary heater relay malfunctions, it can disrupt the dishwasher’s heating process, leading to this error code.

Water Inlet Valve Implication:

However, it’s important to note that with certain Bosch dishwasher models, the E03 error code may indicate a different issue: a potential failure of the water inlet valve. The water inlet valve is responsible for allowing water to flow into the dishwasher. If this valve fails, the dishwasher won’t fill with water, causing an E03 error code to appear.

Troubleshooting the E03 Error:

If you encounter the E03 error code on your Bosch dishwasher, here are steps you can take to diagnose and potentially resolve the issue:

1. Inspect the Water Supply: First, check whether the dishwasher is receiving an adequate water supply. Ensure that the water inlet valve is turned on and that the water source is not blocked or restricted.
2. Clean Filters: Sometimes, clogged filters can impede water flow. Check and clean the dishwasher’s filters if necessary.
3. Test the Water Inlet Valve: If water isn’t filling the dishwasher, you may need to test the water inlet valve for functionality. You can use a multimeter to check for continuity. If it’s faulty, consider replacing the water inlet valve.
4. Inspect the Heating Element: If the issue appears to be related to the auxiliary heater relay, examine the heating element for visible damage or loose connections. If needed, consult your dishwasher’s manual for guidance on replacing the heating element.
5. Reset the Dishwasher: In some cases, a simple reset can clear the error code. Turn off the dishwasher, unplug it from the power source for a few minutes, and then plug it back in.

When to Seek Professional Help:

If your troubleshooting efforts do not resolve the E03 error code, or if you are uncertain about the cause, it’s advisable to contact a Bosch technician. They can perform a more in-depth diagnosis, repair or replace components, and ensure your dishwasher functions optimally.

Bosch Dishwasher Error code E02

Bosch Dishwasher Error code E02

If you own a Bosch dishwasher and are suddenly greeted with error code E02 on its display, it’s a clear signal that something is amiss. This error code signifies a heater relay fault or a heating issue within your dishwasher. In this detailed guide, we’ll explore the possible causes of the E02 error code, how to diagnose the problem, and what steps you can take to resolve it.

What Does E02 Mean?

The E02 error code is a built-in diagnostic feature in Bosch dishwashers that indicates a problem with the heater relay on the control board. The heater relay plays a crucial role in heating the water inside the dishwasher, ensuring your dishes come out sparkling clean. However, if the heater relay is faulty or malfunctioning, it can disrupt the heating process, leading to this error.

In some Bosch dishwasher models, the E02 error can also be triggered by a malfunctioning temperature sensor or thermistor. These components are responsible for monitoring and regulating the water temperature during the wash cycle. When they fail to function correctly, the dishwasher may display the E02 error code.

Diagnosing the E02 Error

Before you rush to fix the E02 error, it’s essential to diagnose the issue accurately. Here are some steps to help you identify the root cause:

1. Inspect the Heater Relay: Start by checking the heater relay on the control board. Look for visible signs of damage, corrosion, or loose connections. If you find any issues, such as a burnt-out relay, it may need to be replaced.
2. Test the Temperature Sensor: If your dishwasher model relies on a temperature sensor or thermistor, use a multimeter to test their resistance. The resistance values should align with the specifications outlined in your dishwasher’s user manual. If the readings are off, it could indicate a faulty sensor.

Resolving the E02 Error

Once you’ve identified the source of the E02 error, you can take appropriate action to resolve it:

1. Replace the Heater Relay: If the issue lies with the heater relay, you’ll need to replace it. It’s advisable to seek the assistance of a professional technician to ensure the replacement is done correctly.
2. Replace the Temperature Sensor: If the temperature sensor or thermistor is the culprit, you’ll need to replace it. Be sure to use a compatible replacement part and follow the manufacturer’s instructions.
3. Professional Assistance: For complex repairs or if you’re unsure about diagnosing the issue, it’s always a good idea to contact a professional appliance repair service. They have the expertise and tools to quickly and accurately resolve the E02 error.

Remember that safety should be a top priority when working on your dishwasher. Always disconnect the power supply and follow safety guidelines during any repair or replacement process.

Bosch Dishwasher Error code E01

Bosch Dishwasher Error code E01

The E01 error code typically points to a pump control circuit failure on the main control board of the dishwasher. This failure can lead to various problems, including a lack of water in the dishwasher. When the dishwasher doesn’t receive enough water, it can’t run the heating element efficiently, which triggers the E01 error code.

Causes of E01 Error Code:

Pump Control Circuit Failure: The primary reason for the E01 error is a malfunction in the pump control circuit. This circuit controls the flow of water and manages the dishwasher’s heating element.

How to Resolve the E01 Error Code:

1. Check Water Supply: First, ensure that your dishwasher has a proper water supply. The E01 error can be triggered if the dishwasher doesn’t receive enough water to function correctly.
2. Inspect for Blockages: Examine the water inlet valve, supply lines, and filters for any blockages or debris that might restrict water flow. Clean or replace as needed.
3. Examine the Pump Circuit: If you have experience with appliance repair, you can inspect the pump control circuit on the main control board for loose connections or visible damage. Be sure to disconnect the dishwasher from the power source before attempting this.
4. Reset the Dishwasher: Sometimes, a simple reset can resolve the error. Turn off the dishwasher and unplug it for a few minutes. Then, plug it back in and turn it on.
5. Professional Assistance: If you are not comfortable with appliance repair or if the issue persists after performing the above steps, it’s advisable to contact a professional technician. They have the expertise and tools to diagnose and repair the pump control circuit or other components that may be causing the E01 error.

By understanding the Bosch dishwasher error code E01 and following these steps, you can effectively troubleshoot and resolve the issue. Remember to prioritize safety by disconnecting the dishwasher from the power source before attempting any repairs.

Bosch Dishwasher Error Codes

Bosch Dishwasher Error Codes

In the world of household appliances, Bosch is a renowned and trusted brand, known for its commitment to quality and innovation. Bosch dishwashers, in particular, are celebrated for their efficiency and performance. However, like any sophisticated appliance, Bosch dishwashers may encounter issues, and one common way they communicate these issues is through error codes.

At Appliance Repair Los Angeles, we understand the importance of a well-functioning dishwasher in a modern home. When you encounter Bosch dishwasher error codes, it can be frustrating and inconvenient. That’s where our team of expert technicians comes in. We specialize in diagnosing and resolving issues with Bosch dishwashers, including those indicated by error codes.

In this blog, we will delve into the world of Bosch dishwasher error codes, providing you with insights into what these codes mean and how to address them effectively. Whether it’s a simple error that you can fix on your own or a more complex issue that requires professional assistance, our skilled technicians are just a phone call away.

For prompt, reliable, and expert help with Bosch dishwasher error codes, contact Appliance Repair Los Angeles at 323-792-1970. We are committed to ensuring that your Bosch dishwasher operates at its best, so you can enjoy clean and sparkling dishes without the hassle of error codes. Stay tuned for valuable insights on common problems and their solutions in this blog.

Bosch Refrigerator Interior Light Issues

Bosch Refrigerator Interior Light Issues

Bosch Refrigerator Light Assembly

Bosch Refrigerator Faulty Compressor

Bosch Refrigerator Faulty Compressor

Wondering what to do about a Bosch refrigerator compressor with problems? This article discusses different compressor problems and their solutions.

Bosch Refrigerator Compressor Not Running – How to Fix

Do the following if you find that a Bosch refrigerator compressor is not running:

1. Check the Power Cord

A damaged power cord won’t be able to supply the needed amount of voltage to the compressor. And if the compressor does not get power, it won’t run.

Therefore, pull the cord out of the outlet and inspect it. If there is any damage, replace the cord. But if there is no damage, check the outlet.

Plug another appliance into it and check for power. If it turns on, the outlet is working fine. But if it does not, replace the outlet.

You can also check the circuit breaker that powers it as well as the fuses. If there was a power surge or outage, it could affect the output of power.

2. Check the Condenser Coils

Clean the coils if you find that they are dirty. And if they are, do a thorough job of cleaning them using a condenser cleaning tool or a vacuum cleaner with an attached brush.

Make sure to clean them every six months because dirty coils cause heat from the refrigerant to travel to the refrigerator.

Because of this, the compressor tends to work harder to lower the temperature. Eventually, it may stop running altogether because of the stress on it.

3. Check the Start Relay

Pull the relay out of the side of the compressor and shake it. It is a small box. If it rattles when you shake it, it is probably damaged. Replace it.

If you smell any burnt odor from it, it means it is definitely damaged. Replace it because leaving it attached to the compressor could damage the compressor.

However, if you want to be doubly sure, place the probes of a multimeter to the relay’s start and run terminals. Check it for continuity. If there is no continuity, replace it.

The compressor will not run if the relay that is supposed to boost it to run is damaged.

4. Check the Condenser Fan

Turn the blades of the fan to see if they spin well. This is one sure-fire way to check the motor. Before this, make sure nothing is obstructing the blades. Clean them to be sure.

If the blades show any sign of friction or stiffness, the motor might be bad. Consider replacing it. But if the blades turn well, test the motor using a multimeter in order to check for continuity. If you don’t find continuity, replace the fan.

This fan has the job of cooling the condenser coils and the compressor as they work. This way, they don’t overheat. So if it fails, the compressor will overheat and stop running over time because of the excess heat.

5. Check the Temperature Controls

Turn the controls off and on and monitor the compressor. If it starts running, then the controls being off caused it to stop running.

But if the compressor remains the same, check to see if they are still functional. You may have to change them if they are bad.

6. Check the Thermistor

Check the continuity of the thermistor. Its resistance should change as the temperature of the refrigerator changes. Even if the refrigerator is not cooling, the meter should register some number changes if the thermistor is working.

However, if the thermistor’s resistance remains the same, it is faulty and you should replace it. Otherwise, the control board won’t have the correct temperature readings.

And if it does not have the readings, it won’t send the power needed by the compressor to run. As a result, the compressor won’t run.

7. Check the Compressor

It is not every day that the compressor of a refrigerator fails. However, it fails eventually. So, test it with a multimeter to check its resistance. Do this where the start relay is attached; you have to remove the relay first.

If the resistance is incorrect, the compressor may be damaged. Consider replacing it.

Bosch Refrigerator Compressor Noise – Quick Fix

How you fix this problem depends on the noise. A good compressor should make a low and steady hum as it works. This is completely normal. But you should worry if the hum becomes a buzz and gets too loud.

And if the compressor is making a clicking noise, the controls of the freezer may be turning it off and on. This happens when the defrost cycle stops and starts again. However, the noise stops after several seconds.

Nevertheless, if the noise continues without stopping, it is likely the start relay has become defective or the compressor is overloaded. Replace the relay.

Now, if the noise sounds like a thump or a vibration, it could mean that the 3 springs that hold the compressor steady are weak and loose.

The thump or vibration is the compressor hitting the sides of its compartment as the refrigerator shuts off. You may have to get a technician to inspect the springs and replace them.

Another cause for the vibration is the refrigerator hitting the walls or surfaces surrounding it. It means you have to create more space around it to eliminate the occurrence. Move the unit to create about 1 inch at the top, 2 inches at the back, and 1 inch at the sides.

But before all these, make sure the compressor is responsible for the noise. Sometimes, the condenser fan makes a noise. And because it is so close to the compressor, it is assumed the noise is from the compressor.

Bosch Fridge Freezer Compressor Hot – Solutions

The following are parts to check if the compressor of your Bosch fridge freezer is hot:

1. Evaporator Fan

Turn the blades of the fan behind the back panel of the freezer. They should turn well but if they don’t, the motor may be bad.

However, if they do, test for continuity in the motor with a multimeter. If there is no continuity, replace the motor.

You can also defrost the freezer manually if there is an accumulation of ice on the fan. Then, troubleshoot the components of the defrost system.

The fan spreads cold air in the unit after passing it over the cooling coils. Now, if it fails, there will be no cold air in the unit, causing the compressor to work harder. As a result, it will run hot.

2. Condenser Coils

Clean the coils to remove dust and debris from them. When you do this, the coils are better able to release the heat which the refrigerant carries with it.

This way, the heat does not transfer to the fridge freezer. If the heat goes to the refrigerator, the internal temperature will rise.

And if it does, then the compressor will pick up the slack, thereby overworking itself. Consequently, it becomes hot.

3. Refrigerant

If the refrigerant is low, the unit will stop cooling. This is despite the work the compressor puts in to make up for the low gas. As a result, the compressor becomes hot.

Check the level of the refrigerant with the help of a certified and licensed technician. If it is truly low, the technician is in the best place to fix it.

But while this fix is happening, endeavor to remove food items from the unit and put them in another freezer. If you don’t have access to it, use a well-insulated cooler stocked with ice packs.

4. Thermostat

Turn the thermostat from low to high and wait for an audible click. If the click does not come, test it for continuity using a multimeter. If you don’t find continuity, no matter the setting, replace the thermostat.

A bad or incorrectly-set thermostat affects the functionality of the compressor. The compressor can run hot when the thermostat is too low or too high. The same is true if it is defective.

5. Compressor

Finally, check the compressor. It may not be functioning anymore. One sign that it is no longer in good working condition is that it runs hot while being unable to perform its duty.

Using a digital multimeter, check the compressor for continuity. Do this on the pins you find after detaching the start relay. If there is no continuity or resistance, it might be time to replace it.

Bosch Refrigerator No Power

Bosch Refrigerator No Power

There are certain appliances in our home that we just assume are going to be working at all times. This includes our refrigerator. What can you do if your Bosch refrigerator is not turning on?

The most common reason why a Bosch refrigerator is not turning on is that it is not getting electricity. This could be due to a tripped circuit breaker or a GFCI outlet that needs to be reset.

Bosch Refrigerator Not Turning On (How To Fix)

Circuit Breaker – Go to the breaker panel and look at the circuit breakers. Try to find the one that is labeled as the refrigerator but if you don’t have it labeled, look for a breaker that is out of line.

If a circuit breaker does not line up with the others and it has a small red line showing on the side, it is the likely culprit. Turn the circuit breaker the whole way off and then back on again. This should solve the problem.

If you continue to have a problem with the circuit breaker tripping, it may be that you have other items plugged into the same circuit that are overloading it. It could also be a breaker that is failing or another electrical problem that would require the assistance of an electrician.

Receptacle – There are times when the receptacle may also be the problem. If you have the refrigerator plugged into a GFI receptacle, then you may need to reset it using the test and reset button on the receptacle.

It is also a good idea to test the receptacle. You can plug in a lamp or another appliance but make sure that you plug it into the same exact plug that you plug use for the refrigerator. If the appliance works, then you can move on to the next step.

Power Cord – There may be times when the power cord becomes damaged or perhaps burnt. Visually inspect the power cord for any cuts or slices and look carefully at the plug for any indication that it is melting or burning.

If the power cord is damaged, it should be replaced.

One other thing to try is a simple reset. This can sometimes correct errors that keep the refrigerator from turning on.

Unplug the refrigerator from the receptacle or turn off the circuit breaker. Leave the power turned off to the refrigerator for a few minutes before reestablishing power. Once the refrigerator fully restarts, the small errors should be gone.

Restarting a refrigerator can happen fairly quickly but you do need to be concerned about the items that are inside the fridge. If the refrigerator has not been working for more than four hours, it is unlikely that the refrigerated items are going to be good any longer.

As the old saying goes, it’s better safe than sorry so throw out any items that may have spoiled.

Reasons Why Bosch Refrigerator Is Not Turning On

Although a problem with the power supply is the most common reason why a Bosch refrigerator has no power, it is by no means the only reason. Here are a few other things to check to make sure that your refrigerator is back up and running as quickly as possible.

1. Demo Mode

One problem that is often overlooked is the possibility that your refrigerator is in demo mode. This is a mode that allows the refrigerator to be functioning at the store but it does not engage the compressor, so it will not run and cool. The light may work, but that will be the only feature.

If you think that your Bosch refrigerator may be in demo mode, it’s a relatively easy thing to take it out and put it into regular operating mode. This will allow your refrigerator to begin working and often correct the problem that is keeping it from operating in that way.

Turn your refrigerator off by either unplugging it from the wall or flipping off the circuit breaker. You will leave the power off to the refrigerator for a minimum of five minutes. This will give the refrigerator an opportunity to reset.

When you turn the refrigerator back on, you should be holding in the ‘alarm off’ button. You have about five seconds after reestablishing power to push the button or you will have to start the process over again.

Continue to hold the ‘alarm off’ button for a minimum of 15 seconds. The refrigerator will eventually beep three times, which lets you know that it is rebooting. After reboots, demo mode should be turned off and the compressor should be running.

2. Compressor

Another reason why your Bosch refrigerator does not have power is that the compressor is not operating properly. The compressor may not necessarily be an electrical component but it is a very important part of your Bosch refrigerator.

The compressor is responsible for pushing the coolant through the refrigerator and keeping everything cold. If the compressor is not working properly, then it is not going to be pushing the coolant and the refrigerator is not going to turn on.

You may have some power to the refrigerator if the compressor is the problem. The control panel may light up and the light may turn on when you open the refrigerator door. The real problem is the fact that your refrigerator will not be cool.

Unfortunately, replacing the compressor is a difficult and expensive problem. You should hire a professional to come in and help you with this situation.

3. Main Control Board

Another reason why your Bosch refrigerator does not have power is that the compressor is not operating properly. The compressor may not necessarily be an electrical component but it is a very important part of your Bosch refrigerator.

The compressor is responsible for pushing the coolant through the refrigerator and keeping everything cold. If the compressor is not working properly, then it is not going to be pushing the coolant and the refrigerator is not going to turn on.

You may have some power to the refrigerator if the compressor is the problem. The control panel may light up and the light may turn on when you open the refrigerator door. The real problem is the fact that your refrigerator will not be cool.

One other thing to check is the main control board. If the electrical power is established to the refrigerator but you are still not getting any power to it, then the control board may be the problem.

It’s difficult to check the control board because it is not easy to test. There are a few things to look out for, however, that will let you know if the control board may be the culprit.

1. No Lights or Sounds – If you press the buttons on the control panel and there are no lights or sounds, then it might be a problem with the main control board. If a few of the buttons are working but not all of them are working, it could be either the main control board or the panel board.

2. Damage – Although you can’t easily test the control board with a multimeter, you can remove the control board and inspect it visually. If you notice any signs of cracking or burning, then it is likely something that needs to be replaced.

Why Bosch Refrigerator Has No Power

If you are having difficulty with your Bosch refrigerator and there is no power, then it is likely a problem with the power supply. We discussed this in detail, but there are a few considerations that can pinpoint the problem more directly.

First of all, if any of the components in the refrigerator are working, it is not likely to be a problem with the power supply. For example, if you open the refrigerator door and the light comes on or if you press a button on the control panel and it makes a beep, then it is not a problem with the power supply.

The only reason why it would be a problem with the power supply is if you are not getting enough power to the refrigerator to operate the compressor. Some of the minor items in the refrigerator may be operating but if the compressor is not operating, the refrigerator and freezer are not going to be cold.

There may be other factors that keep the Bosch refrigerator from having power. This could be a tripped circuit breaker, a blown fuse (if you have a fuse panel), too many appliances on the circuit, a bad receptacle, or a damaged power cord.