Rinse Aid Light on Bertazzoni Dishwasher

If you see the rinse aid light on your Bertazzoni dishwasher, it means that the rinse aid level is low. Rinse aid is a liquid that helps to prevent water spots and film from forming on your dishes after the wash cycle.

To fix this issue, simply add more rinse aid to the dispenser. The dispenser is located next to the detergent cup. To open the dispenser, simply turn the cap counterclockwise.

The amount of rinse aid you need to add will depend on the size of your dishwasher and the hardness of your water. In general, you should add rinse aid until the reservoir is full.

Once you have added more rinse aid, the light should turn off. If the light does not turn off, you may need to reset the dishwasher. To do this, simply unplug the dishwasher for 30 seconds and then plug it back in.

Here are some tips for preventing the rinse aid light from coming on:

• Use soft water if possible.
• Use a rinse aid that is designed for use in hard water.
• Add rinse aid to the dispenser before each use.
• Check the rinse aid level regularly and add more as needed.

By following these tips, you can keep your dishes looking their best and prevent water spots and film from forming.

Troubleshooting Tips

If you have added more rinse aid and the light is still on, there may be a problem with the rinse aid dispenser. To troubleshoot this issue, check the following:

• Make sure that the rinse aid dispenser is not clogged.
• Check the rinse aid dispenser for any damage.

If you have checked all of these things and the light is still on, you may need to replace the rinse aid dispenser.