Bertazzoni refrigerator water drips from the water dispenser

It is normal for a few drops of water to drip from the water dispenser on a Bertazzoni refrigerator. This is because the water line has a small amount of water pressure in it, even when the dispenser is not in use. However, if water is dripping excessively from the dispenser, there may be a problem with the water line connection.

To troubleshoot water dripping from the water dispenser on a Bertazzoni refrigerator, follow these steps:

1. Check the water line connection. The water line connection is located at the back of the refrigerator, where the water line enters the appliance. Make sure that the connection is tight and secure. If the connection is loose, tighten it with a wrench.
2. Check the water filter. A clogged water filter can restrict water flow and cause water to drip from the dispenser. Replace the water filter if it is more than six months old.
3. Check the water pressure. The water pressure to the refrigerator should be between 30 and 100 psi. If the water pressure is too low, it may not be able to push the water through the dispenser properly. Contact your local water authority to check the water pressure to your home.

Additional tips

• If you have recently moved, check the water line connection to make sure that it is not loose.
• If you have pets, make sure that they have not chewed on the water line.
• If you have a water filter, change it regularly to prevent clogging.

If you follow these troubleshooting steps and the water is still dripping from the dispenser, you may need to contact a qualified refrigerator repair technician.