Bertazzoni Refrigerator Error Code EH

The EH error code on a Bertazzoni refrigerator indicates that the humidity sensor has failed. The humidity sensor is a small, electronic device that is located in the fresh food compartment of the refrigerator. The sensor measures the humidity level in the air and sends a signal to the refrigerator’s control board. The control board then uses this signal to adjust the humidity levels in the refrigerator.

If the humidity sensor fails, the refrigerator may not be able to maintain the desired humidity level. This can lead to a number of problems, including:

• Food spoilage: If the humidity level is too low, food may dry out and become inedible.
• Mold growth: If the humidity level is too high, mold may grow on food and surfaces in the refrigerator.
• Frost buildup: If the humidity level is too high, frost may build up on the evaporator coils, which can reduce the refrigerator’s efficiency.

There are a few possible causes of a humidity sensor failure on a Bertazzoni refrigerator. One possibility is that the sensor is simply defective and needs to be replaced. Another possibility is that the sensor is dirty or damaged. If the sensor is dirty, you can try cleaning it with a soft cloth. If the sensor is damaged, it will need to be replaced.

If you see the EH error code on your Bertazzoni refrigerator, you can try the following troubleshooting steps:

1. Check to make sure that the refrigerator is plugged in and that the power is on. This may seem like a simple step, but it is important to check the basics first.
2. Check the humidity sensor for damage. Look for any cracks, dents, or other signs of damage. If the sensor is dirty, you can try cleaning it with a soft cloth.
3. If the humidity sensor is not damaged, it may need to be replaced. You can contact Bertazzoni customer service for assistance with replacing the humidity sensor.

To help prevent humidity sensor failures on Bertazzoni refrigerators, you can follow these tips:

• Keep the refrigerator clean and free of debris. Dirt and debris can build up on the humidity sensor and interfere with its ability to function properly.
• Avoid placing food or liquids near the humidity sensor. Food and liquids can also interfere with the humidity sensor’s ability to function properly.
• If you live in a humid climate, you may need to dehumidify the air in your home. A high humidity level can increase the risk of humidity sensor failure.

If you have tried the troubleshooting steps above and you are still seeing the EH error code, you should contact a qualified appliance repair technician.