Bertazzoni Refrigerator Error Code CC

The CC error code on a Bertazzoni refrigerator indicates that the ice maker defrost sensor has failed. The ice maker defrost sensor is a small, electronic device that is located in the ice maker compartment of the refrigerator. The sensor measures the temperature of the ice maker compartment and sends a signal to the refrigerator’s control board. The control board then uses this signal to determine when to defrost the ice maker.

If the ice maker defrost sensor fails, the refrigerator may not be able to defrost the ice maker properly.

This can lead to a number of problems, including:

• Buildup of ice and frost in the ice maker compartment: This can make it difficult to remove ice and can also lead to the ice maker not working properly.
• Damage to the ice maker: Ice and frost buildup can also damage the ice maker, which can require costly repairs.

There are a few possible causes of an ice maker defrost sensor failure on a Bertazzoni refrigerator. One possibility is that the sensor is simply defective and needs to be replaced. Another possibility is that the sensor is dirty or damaged. If the sensor is dirty, you can try cleaning it with a soft cloth. If the sensor is damaged, it will need to be replaced.

If you see the CC error code on your Bertazzoni refrigerator, you can try the following troubleshooting steps:

1. Check to make sure that the refrigerator is plugged in and that the power is on. This may seem like a simple step, but it is important to check the basics first.
2. Check the ice maker defrost sensor for damage. Look for any cracks, dents, or other signs of damage. If the sensor is dirty, you can try cleaning it with a soft cloth.
3. If the ice maker defrost sensor is not damaged, it may need to be replaced. You can contact Bertazzoni customer service for assistance with replacing the ice maker defrost sensor.

To help prevent ice maker defrost sensor failures on Bertazzoni refrigerators, you can follow these tips:

• Keep the refrigerator clean and free of debris. Dirt and debris can build up on the ice maker defrost sensor and interfere with its ability to function properly.
• Avoid placing food or liquids near the ice maker defrost sensor. Food and liquids can also interfere with the ice maker defrost sensor’s ability to function properly.
• If you live in a humid climate, you may need to dehumidify the air in your home. A high humidity level can increase the risk of ice maker defrost sensor failure.

If you have tried the troubleshooting steps above and you are still seeing the CC error code, you should contact a qualified appliance repair technician.

Here are some additional details about the ice maker defrost sensor:

• The ice maker defrost sensor is typically located in the back of the ice maker compartment.
• The sensor is usually a small, round or square device with two wires attached to it.
• The sensor measures the temperature of the ice maker compartment by using a thermistor.
• The thermistor is a small, electronic device that changes its resistance depending on the temperature.

The ice maker defrost sensor is a critical component of the ice maker system. If the sensor fails, the ice maker will not be able to defrost properly, which can lead to a number of problems.