Bertazzoni Range/Oven Error Code E6

The Bertazzoni Range/Oven Error Code E6 indicates that there is a problem with the broiler ignition. This can be caused by a faulty igniter, a gas flow issue, or a control board problem.

Troubleshooting Steps

• Check the igniter spark. The igniter should produce a bright blue spark when it is energized. If the spark is weak or nonexistent, the igniter may be faulty.
• Ensure proper gas supply. The gas supply to the broiler should be turned on and the gas pressure should be within the manufacturer’s specifications.
• Consult a technician. If you have checked the igniter and gas supply and the error code persists, you should contact a qualified technician.

Possible Causes

• Faulty igniter. The igniter is a small, electric spark plug that ignites the gas in the broiler. If the igniter is faulty, it will not produce a spark, and the broiler will not heat up.
• Gas flow issue. The gas supply to the broiler should be turned on and the gas pressure should be within the manufacturer’s specifications. If the gas supply is turned off or the gas pressure is too low, the broiler will not ignite.
• Control board problem. The control board is the computer that controls the operation of the range or oven. If the control board is faulty, it may not be able to properly communicate with the igniter or the gas valve.

To help prevent the Bertazzoni Range/Oven Error Code E6, you can take the following steps:

• Have the range or oven serviced regularly by a qualified technician. This will help to identify and fix any potential problems before they cause an error code.
• Keep the igniter clean. The igniter should be cleaned regularly to remove any dirt or debris that could interfere with its operation.
• Check the gas supply regularly. Make sure that the gas supply to the broiler is turned on and that the gas pressure is within the manufacturer’s specifications.

The Bertazzoni Range/Oven Error Code E6 can be caused by a number of problems. By following the troubleshooting steps outlined above, you can often identify and fix the problem yourself. If you are unable to fix the problem, you should contact a qualified technician.