Bertazzoni Dishwasher Etching

Etching is a common problem that can occur in Bertazzoni dishwashers. It is caused by the combination of high water temperatures and harsh detergents.

High Water Temperatures

The inlet water temperature in Bertazzoni dishwashers can reach up to 150 degrees Fahrenheit. This high temperature can cause the minerals in hard water to dissolve and form deposits on the surface of glassware. These deposits can then scratch the glassware, causing etching.

Harsh Detergents

Some dishwasher detergents contain harsh chemicals that can also scratch glassware. These chemicals can be found in both powdered and liquid detergents.

Symptoms

Etched glassware will have a dull or cloudy appearance. In some cases, the etching can be so severe that the glassware becomes cracked or chipped.

Prevention

There are a few things you can do to prevent etching in your Bertazzoni dishwasher:

• Use soft water. If you have hard water, you can use a water softener or a water filter to soften the water before it enters your dishwasher.
• Use less detergent. If you have soft water, you can use less detergent than the manufacturer recommends.
• Lower the inlet water temperature. If your dishwasher has an adjustable inlet water temperature, you can lower the temperature to reduce the risk of etching.

If your glassware is already etched, there are a few things you can try to remove the etching:

• Use a polishing compound. Polishing compounds can help to remove minor etching.
• Use a vinegar solution. Vinegar can help to dissolve mineral deposits.
• Use a professional etching removal service. Professional etching removal services can use specialized equipment to remove even severe etching.

Etching is a preventable problem, but it can be difficult to repair. By following the tips above, you can help to protect your glassware from etching and keep your dishwasher looking its best.