Bertazzoni Dishwasher Error Code E13

If you see error code E13 on your Bertazzoni dishwasher, it means that the heater is not working properly. This can be caused by a number of things, including:

• A loose or disconnected connection to the heater
• A faulty heater
• A problem with the control board

To troubleshoot the error code, you can try the following steps:

1. Check the connections to the heater. Make sure that all of the connections are tight and secure.
2. If the connections are secure, you can try replacing the heater.
3. If replacing the heater does not fix the problem, you may need to contact a qualified technician to diagnose the issue with the control board.

Troubleshooting Steps

Check the connections to the heater

The first step is to check the connections to the heater. Make sure that all of the connections are tight and secure. You can use a multimeter to test the connections for continuity. If the connections are not secure, tighten them or replace them as needed.

Replace the heater

If the connections are secure, you can try replacing the heater. The heater is a relatively easy part to replace, and you can usually find a replacement heater at a local appliance store. To replace the heater, follow the instructions in your dishwasher’s owner’s manual.

Contact a qualified technician

If replacing the heater does not fix the problem, you may need to contact a qualified technician to diagnose the issue with the control board. The control board is a complex component, and it can be difficult to diagnose and repair. A qualified technician will have the tools and experience necessary to properly diagnose and repair the control board.

Error code E13 can be a frustrating problem, but it is usually relatively easy to fix. By following the troubleshooting steps above, you can usually get your dishwasher back up and running in no time.