Bertazzoni Dishwasher Error Code E11

The E11 error code on a Bertazzoni dishwasher indicates a problem with the door switch. The door switch is a component that tells the dishwasher when the door is closed and locked. If the door switch is not working properly, the dishwasher will not be able to start a cycle.

To troubleshoot the E11 error code, you can try the following:

1. Check the door switch connection. The door switch is usually located on the inside of the dishwasher door. Disconnect the power to the dishwasher and then check the connection between the door switch and the control board. Make sure that the connection is secure and that there are no loose wires.
2. Check the door switch for damage. If the door switch is damaged, it will need to be replaced.
3. Check the control board. If the control board is damaged, it may need to be replaced.

If you have tried all of the above troubleshooting steps and the error code is still occurring, you should contact a qualified technician.

Additional Information

The E11 error code is a relatively common error on Bertazzoni dishwashers. It is often caused by a loose or damaged door switch connection. If you are experiencing this error code, it is important to troubleshoot the problem as soon as possible to prevent further damage to your dishwasher.