Bertazzoni Dishwasher Error Code E10

The error code E10 on a Bertazzoni dishwasher indicates that the dry cycle motor is not working properly.

This can be caused by a number of issues, including:

• A loose or disconnected wire
• A faulty motor
• A problem with the control board

Troubleshooting

If you see the error code E10 on your Bertazzoni dishwasher, you can try the following troubleshooting steps:

1. Check the connections

First, check the connections to the dry cycle motor. Make sure that all of the wires are properly connected and that there are no loose or damaged connections.

2. Check the motor

If the connections are secure, you can try testing the motor itself. You can do this by using a multimeter to check for continuity between the motor terminals. If there is no continuity, the motor is faulty and will need to be replaced.

3. Check the control board

If the motor is working properly, the problem may be with the control board. You can test the control board by using a multimeter to check for voltage at the motor terminals. If there is no voltage, the control board is faulty and will need to be replaced.

If you are not comfortable troubleshooting the problem yourself, you should contact a qualified technician.

Additional information

The dry cycle motor is responsible for circulating hot air through the dishwasher to dry the dishes. If the motor is not working properly, the dishes may not dry completely.

Here are some tips to help prevent this error code:

• Make sure that the dishwasher is properly leveled. This will help to ensure that the dry cycle motor is working properly.
• Clean the filters regularly. Clogged filters can restrict airflow and prevent the dishes from drying completely.
• Use the correct detergent. Using the wrong detergent can leave residue on the dishes, which can also prevent them from drying completely.

By following these tips, you can help to keep your Bertazzoni dishwasher working properly and prevent the error code E10 from occurring.