Bertazzoni Dishwasher Error Code E07

If you see the error code E07 on your Bertazzoni dishwasher, it means that the drain pump is blocked. This can be caused by a number of things, including:

• Food particles or other debris: The most common cause of a blocked drain pump is food particles or other debris that have accumulated in the drain hose or filter.
• A kink or clog in the drain hose: If the drain hose is kinked or clogged, it can prevent water from draining properly.
• A faulty drain pump: In rare cases, the drain pump itself may be faulty.

To troubleshoot the E07 error code, follow these steps:

1. Check the drain hose for kinks or clogs. Disconnect the drain hose from the dishwasher and inspect it for any kinks or clogs. If you find any, straighten or remove the clog.
2. Clean the drain filter. The drain filter is located at the bottom of the dishwasher. Remove the filter and clean it with a brush or a vacuum cleaner.
3. Run a diagnostic cycle. If you’ve checked the drain hose and filter and the error code is still appearing, run a diagnostic cycle. This will help to identify the source of the problem.

If you’ve tried all of these steps and the error code is still appearing, you may need to call a qualified technician.

Here are some additional tips to help prevent the E07 error code:

• Clean the drain hose and filter regularly. This will help to prevent food particles and debris from accumulating.
• Avoid overloading the dishwasher. Overloading the dishwasher can put too much strain on the drain pump.
• Use a dishwasher detergent that is designed for your dishwasher. Detergents that are not designed for your dishwasher can leave residue that can clog the drain pump.

By following these tips, you can help to keep your Bertazzoni dishwasher running smoothly and prevent the E07 error code from appearing.