Bertazzoni Dishwasher Error Code E03

If you see the error code E03 on your Bertazzoni dishwasher, it means that the water pressure in your home is too low. This can prevent the dishwasher from filling up properly, which can lead to a variety of problems, including:

• The dishwasher may not be able to start the wash cycle.
• The dishes may not be clean.
• The dishwasher may leak.

To fix this error, you need to make sure that the water pressure in your home is within the manufacturer’s specifications. The specifications for your specific dishwasher model can be found in the owner’s manual.

How to Check Your Water Pressure

To check your water pressure, you can use a water pressure gauge. You can purchase a water pressure gauge at most hardware stores.

To use a water pressure gauge, follow these steps:

1. Turn off the water supply to your dishwasher.
2. Attach the water pressure gauge to the water supply line that leads to your dishwasher.
3. Turn on the water supply to your dishwasher.
4. Read the water pressure gauge.

The water pressure should be between 20 and 100 psi. If the water pressure is below 20 psi, you will need to contact a plumber to increase the water pressure in your home.

Troubleshooting Tips

If you have checked the water pressure and it is within the manufacturer’s specifications, you can try the following troubleshooting tips:

• Make sure that the water inlet valve is properly connected.
• Check the water inlet hose for any leaks.
• Clean the water inlet filter.

If you have tried these troubleshooting tips and the error code is still appearing, you may need to contact a qualified technician.

The error code E03 is a relatively common error that can be caused by a number of factors. By following the troubleshooting tips in this article, you can usually fix the problem yourself.