Bertazzoni Dishwasher Error Code E02

The Bertazzoni dishwasher error code E02 indicates that the water inlet valve is not closing properly. This can prevent the dishwasher from filling with water, which can lead to a variety of problems, including:

• The dishwasher may not start the wash cycle at all.
• The dishwasher may start the wash cycle, but it will not fill with enough water.
• The dishwasher may fill with water, but it will not drain properly.

To troubleshoot the E02 error code, follow these steps:

1. Check the water supply to the dishwasher. Make sure that the water supply is turned on and that the water pressure is within the manufacturer’s specifications.
2. Check the water inlet valve. The water inlet valve is located on the bottom of the dishwasher. Make sure that the valve is properly seated and that there are no leaks.
3. Check the water inlet hose. The water inlet hose is located between the water supply and the dishwasher. Make sure that the hose is not kinked or damaged.

If you have checked all of these items and the E02 error code is still present, you may need to contact a qualified technician.

The E02 error code can be caused by a variety of factors, including:

• A faulty water inlet valve
• A kinked or damaged water inlet hose
• A build-up of debris or sediment in the water inlet valve
• A problem with the dishwasher’s control board

If you are able to identify the cause of the E02 error code, you may be able to fix the problem yourself. However, if you are not comfortable troubleshooting electrical or mechanical problems, it is best to contact a qualified technician.