Asko Refrigerator Error Code ER1

Error code ER1 on your Asko refrigerator indicates a Temperature Sensor Failure. This problem arises when the internal temperature sensor, a crucial component responsible for monitoring and regulating the refrigerator’s temperature, is malfunctioning.

1. Check for Obstructions: Ensure that there are no items blocking or obstructing the sensor inside the refrigerator compartment. Sometimes, rearranging items or removing obstacles can resolve the issue.
2. Power Cycle the Refrigerator: Turn off the refrigerator and unplug it from the power source. Wait for about 5 minutes before plugging it back in and turning it on. This simple reset might recalibrate the temperature sensor.
3. Temperature Settings: Verify that the temperature settings are appropriate for your needs. Incorrect settings can sometimes trigger false readings from the sensor. Refer to the user manual for recommended temperature settings.
4. Inspect the Sensor Wiring: Carefully inspect the wiring connected to the temperature sensor. Look for any visible damage, loose connections, or frayed wires. If any issues are found, repair or replace the wiring as needed.
5. Perform a Self-Diagnosis (if available): Some Asko refrigerators have a self-diagnosis feature. Refer to your user manual to initiate a self-diagnostic test. This can help identify specific issues with the temperature sensor and other components.

By following these DIY solutions, you may be able to troubleshoot and resolve the Asko Refrigerator Error Code ER1. However, if the problem persists or if you’re unsure about performing any of these steps, don’t hesitate to reach out to our professionals for timely and accurate assistance.