Asko Dishwasher Error Code F4

Error codes can be perplexing, especially when they disrupt the seamless operation of your Asko dishwasher. One such code that users may encounter is F4, indicating a water intake fault. In this blog post, we’ll delve into the intricacies of Asko Dishwasher Error Code F4, offering a detailed guide to help you understand and troubleshoot the issue.

Water intake fault. < 80 pulses within 60 seconds or correct number of pulses is not achieved within 255 seconds. Programme interrupted. Check: Water supply, flow sensor, inlet valve, wiring.

Breaking Down the Error:

• Pulse Requirement: The dishwasher expects a minimum of 80 pulses within 60 seconds during the water intake process.
• Timeout: If the correct number of pulses is not achieved within 255 seconds, the program is interrupted.
• Possible Causes: The error prompts you to check the water supply, flow sensor, inlet valve, and wiring for potential issues.

Troubleshooting Steps:

1. Water Supply Check:

   • Ensure that the water supply to the dishwasher is uninterrupted.
   • Check for kinks or blockages in the water hose.
   • Verify that the water pressure meets the recommended levels.

2. Flow Sensor Inspection:

   • The flow sensor monitors the water flow into the dishwasher. Check for any obstructions or damage.
   • Clean the sensor to ensure accurate readings.

3. Inlet Valve Examination:

   • The inlet valve controls the water entering the dishwasher. Inspect for clogs or malfunction.
   • Test the inlet valve for proper functioning. If faulty, consider replacement.

4. Wiring Inspection:

   • Examine the wiring connected to the water intake components.
   • Look for loose connections, damaged wires, or corrosion.